A comparison between ultraviolet disinfection and copper alginate beads within a vortex bioreactor for the deactivation of bacteria in simulated waste streams with high levels of colour, humic acid and suspended solids

We show in this study that the combination of a swirl flow reactor and an antimicrobial agent (in this case copper alginate beads) is a promising technique for the remediation of contaminated water in waste streams recalcitrant to UV-C treatment. This is demonstrated by comparing the viability of both common and UV-C resistant organisms in operating conditions where UV-C proves ineffective - notably high levels of solids and compounds which deflect UV-C. The swirl flow reactor is easy to construct from commonly available plumbing parts and may prove a versatile and powerful tool in waste water treatment in developing countries.

Assessing hydrothermal liquefaction for the production of bio-oil and enhanced metal recovery from microalgae cultivated on acid mine drainage

The hydrothermal liquefaction(HTL) of algal biomass is a promising route to viable second generation biofuels. In this investigation HTL was assessed for the valorisation of algae used in the remediation of acid mine drainage (AMD). Initially the HTL process was evaluated using Arthrospira platensis (Spirulina) with additional metal sulphates to simulate metal remediation. Optimised conditions were then used to process a natural algal community (predominantly Chlamydomonas sp.) cultivated under two scenarios: high uptake and low uptake of metals from AMD. High metal concentrations appear to catalyse the conversion to bio-oil, and do not significantly affect the heteroatom content or higher heating value of the bio-oil produced. The associated metals were found to partition almost exclusively into the solid residue, favourable for potential metal recovery. High metal loadings also caused partitioning of phosphates from the aqueous phase to the solid phase, potentially compromising attempts to recycle process water as a growth supplement. HTL was therefore found to be a suitable method of processing algae used in AMD remediation, producing a crude oil suitable for upgrading into hydrocarbon fuels, an aqueous and gas stream suitable for supplementing the algal growth and the partitioning of most contaminant metals to the solid residue where they would be readily amenable for recovery and/or disposal.

Assessing hydrothermal liquefaction for the production of bio-oil and enhanced metal recovery from microalgae cultivated on acid mine drainage

The hydrothermal liquefaction(HTL) of algal biomass is a promising route to viable second generation biofuels. In this investigation HTL was assessed for the valorisation of algae used in the remediation of acid mine drainage (AMD). Initially the HTL process was evaluated using Arthrospira platensis (Spirulina) with additional metal sulphates to simulate metal remediation. Optimised conditions were then used to process a natural algal community (predominantly Chlamydomonas sp.) cultivated under two scenarios: high uptake and low uptake of metals from AMD. High metal concentrations appear to catalyse the conversion to bio-oil, and do not significantly affect the heteroatom content or higher heating value of the bio-oil produced. The associated metals were found to partition almost exclusively into the solid residue, favourable for potential metal recovery. High metal loadings also caused partitioning of phosphates from the aqueous phase to the solid phase, potentially compromising attempts to recycle process water as a growth supplement. HTL was therefore found to be a suitable method of processing algae used in AMD remediation, producing a crude oil suitable for upgrading into hydrocarbon fuels, an aqueous and gas stream suitable for supplementing the algal growth and the partitioning of most contaminant metals to the solid residue where they would be readily amenable for recovery and/or disposal.

Characterisation of algicidal bacterial exometabolites against the lipid-accumulating diatom Skeletonema sp.

Microalgae are of increasing interest due to their occurrence in the environment as harmful algal blooms and as a source of biomass for the production of fine and bulk chemicals. A method for the low cost disruption of algal biomass for environmental remediation or bioprocessing is desirable. Naturally-occurring algal lytic agents from bacteria could provide a cost-effective and environmentally desirable solution. A screen for algal lytic agents against a range of marine microalgae has identified two strains of algicidal bacteria isolated from the coastal region of the Western English Channel. Both strains (designated EC-1 and EC-2) showed significant algicidal activity against Skeletonema sp. and were identified as members of Alteromonas sp. and Maribacter sp. respectively. Characterisation of the two bioactivities revealed that they are small extracellular metabolites displaying thermal and acid stability. Purification of the EC-1 activity to homogeneity and initial structural analysis has identified it as a putative peptide with a mass of 1266. amu.

Characterisation of algicidal bacterial exometabolites against the lipid-accumulating diatom Skeletonema sp.

Microalgae are of increasing interest due to their occurrence in the environment as harmful algal blooms and as a source of biomass for the production of fine and bulk chemicals. A method for the low cost disruption of algal biomass for environmental remediation or bioprocessing is desirable. Naturally-occurring algal lytic agents from bacteria could provide a cost-effective and environmentally desirable solution. A screen for algal lytic agents against a range of marine microalgae has identified two strains of algicidal bacteria isolated from the coastal region of the Western English Channel. Both strains (designated EC-1 and EC-2) showed significant algicidal activity against Skeletonema sp. and were identified as members of Alteromonas sp. and Maribacter sp. respectively. Characterisation of the two bioactivities revealed that they are small extracellular metabolites displaying thermal and acid stability. Purification of the EC-1 activity to homogeneity and initial structural analysis has identified it as a putative peptide with a mass of 1266. amu.