Surface Ocean CO2 Atlas (SOCAT) gridded data products

As a response to public demand for a well-documented, quality controlled, publically available, global surface ocean carbon dioxide (CO2) data set, the international marine carbon science community developed the Surface Ocean CO2 Atlas (SOCAT). The first SOCAT product is a collection of 6.3 million quality controlled surface CO2 data from the global oceans and coastal seas, spanning four decades (1968–2007). The SOCAT gridded data presented here is the second data product to come from the SOCAT project. Recognizing that some groups may have trouble working with millions of measurements, the SOCAT gridded product was generated to provide a robust, regularly spaced CO2 fugacity (fCO2) product with minimal spatial and temporal interpolation, which should be easier to work with for many applications. Gridded SOCAT is rich with information that has not been fully explored yet (e.g., regional differences in the seasonal cycles), but also contains biases and limitations that the user needs to recognize and address (e.g., local influences on values in some coastal regions).

Global sea-to-air flux climatology for bromoform, dibromomethane and methyl iodide

Volatile halogenated organic compounds containing bromine and iodine, which are naturally produced in the ocean, are involved in ozone depletion in both the troposphere and stratosphere. Three prominent compounds transporting large amounts of marine halogens into the atmosphere are bromoform (CHBr3), dibromomethane (CH2Br2) and methyl iodide (CH3I). The input of marine halogens to the stratosphere has been estimated from observations and modelling studies using low-resolution oceanic emission scenarios derived from top-down approaches. In order to improve emission inventory estimates, we calculate data-based high resolution global sea-to-air flux estimates of these compounds from surface observations within the HalOcAt (Halocarbons in the Ocean and Atmosphere) database (https://halocat.geomar.de/). Global maps of marine and atmospheric surface concentrations are derived from the data which are divided into coastal, shelf and open ocean regions. Considering physical and biogeochemical characteristics of ocean and atmosphere, the open ocean water and atmosphere data are classified into 21 regions. The available data are interpolated onto a 1 degrees x 1 degrees grid while missing grid values are interpolated with latitudinal and longitudinal dependent regression techniques reflecting the compounds' distributions. With the generated surface concentration climatologies for the ocean and atmosphere, global sea-to-air concentration gradients and sea-to-air fluxes are calculated. Based on these calculations we estimate a total global flux of 1.5/2.5 Gmol Br yr(-1) for CHBr3, 0.78/0.98 Gmol Br yr(-1) for CH2Br2 and 1.24/1.45 Gmol Br yr(-1) for CH3I (robust fit/ordinary least squares regression techniques). Contrary to recent studies, negative fluxes occur in each sea-to-air flux climatology, mainly in the Arctic and Antarctic regions. "Hot spots" for global polybromomethane emissions are located in the equatorial region, whereas methyl iodide emissions are enhanced in the subtropical gyre regions. Inter-annual and seasonal variation is contained within our flux calculations for all three compounds. Compared to earlier studies, our global fluxes are at the lower end of estimates, especially for bromoform. An under-representation of coastal emissions and of extreme events in our estimate might explain the mismatch between our bottom-up emission estimate and top-down approaches.

Meiofauna Techniques

Meiofaunal organisms are mobile multicellular animals that are smaller than macrofauna and larger than microfauna. The size boundaries of meiofauna are generally based on the standardised mesh apertures of sieves with 500 μm (or 1000 μm) as upper and 63 μm (or 42 μm) as lower limits. Meiofauna are ubiquitous, inhabiting most marine substrata, often in high densities. Meiofauna are highly diverse, and several phyla are only known to occur as meiofauna. Owing to their small size and high densities, specialised techniques are required to collect, preserve and examine meiofauna. These are described, along with approaches to determine biomass of these small animals. Their small size also makes them useful candidates for manipulative experiments, and culturing of individual species and approaches to experiments on whole communities are briefly discussed.

Nematode diversity in different microhabitats in a mangrove region

Mangroves are highly productive environments that play important ecological and socioeconomic roles; however, they have been impacted to different degrees in most countries worldwide. The knowledge of which organisms inhabit this environment and their ecological interactions is the first step towards its conservation. The natural variability of environmental factors in mangroves provides numerous niches available to different species. Meiofauna have patchy patterns of distribution that are related to the availability of resources. Hence, meiofauna are expected to present a high diversity of different taxa occupying the different microhabitats offered by mangroves. This work aims to test the hypothesis that the assemblage structure of Nematoda varies significantly among mangrove microhabitats and to contribute knowledge on the meiofauna diversity in mangrove environments. This work was carried out in a mangrove region at Pernambuco state, Northeastern Brazil. Qualitative samples were collected in nine microhabitats which show different characteristics mainly in terms of presence of vegetation or another organism and sediment grain size. Univariate and multivariate analysis were applied to Nematoda genera abundance data. Our results demonstrate the existence of significant differences among microhabitats regarding nematode assemblage structure corroborating the hypothesis. Different Nematoda assemblages are present in at least seven microhabitats. These assemblages are composed of nematode genera with different trophic and morphological features, demonstrating a strong relationship between morphological diversity and ecological plasticity. Furthermore, this study also demonstrates the importance of the conservation of this ecosystem and its attributes.

A massive phytoplankton bloom induced by an ecosystem-scale iron fertilization experiment in the equatorial Pacific Ocean

The seeding of an expanse of surface waters in the equatorial Pacific Ocean with low concentrations of dissolved iron triggered a massive phytoplankton bloom which consumed large quantities of carbon dioxide and nitrate that these microscopic plants cannot fully utilize under natural conditions. These and other observations provide unequivocal support for the hypothesis that phytoplankton growth in this oceanic region is limited by iron bioavailability.

Family-level AMBI is valid for use in the north-eastern Atlantic but not for assessing the health of microtidal Australian estuaries

Analysis of benthic macroinvertebrate samples at a higher taxonomic level than species, e.g. family, potentially provides a more cost-effective protocol for environmental impact assessments and monitoring as it requires less time, funds and taxonomic expertise. Using the AMBI database, species ecological group scores are shown to be coherent within families. Faunal data from a wide range of environmental impact scenarios in the north-eastern Atlantic demonstrate that AMBI, calculated from mean values for families, exhibits a strong linear relationship with species-level AMBI, the correlation improving by using square-root transformed rather than untransformed abundances. In many regions of the world, however, the sensitivity of benthic macroinvertebrates to environmental perturbations is unknown, precluding the use of AMBI for environmental assessments. Yet the families are essentially the same as in the AMBI database. The utility of family-level AMBI is tested using data for four south-western Australian estuaries previously subjected to environmental quality assessments, but where only 17 species of the 144 taxa are included in the AMBI database. Although family-level AMBI scores reflect differences in environmental quality spatially and temporally within an estuary, they do not follow variations in environmental quality among estuaries. Indeed, south-western Australia estuaries are numerically dominated by families with high AMBI scores, probably due to the detrimental effects of natural accumulations of organic material in estuaries with long residence times. As taxonomic distinctness follows trends in environmental quality among estuaries, as well as temporally and spatially within a system, it provides an appropriate substitute for assessing the 'heath' of microtidal estuaries.

Meiobenthos and macrobenthos are discrete entities and not artefacts of sampling a size continuum: Comment on Bett (2013)

Species size distributions for metazoan benthic invertebrates conform to the highly conservative bimodal pattern, regardless of the sieve mesh sizes or numbers of sieves used in their extraction. This pattern is not an artefact of sampling a size continuum as suggested by computer simulations using just 2 fixed mesh sizes in Bett (2013; Mar Ecol Prog Ser 487:1-6). Meiobenthos and macrobenthos are coherent entities, each with a distinct suite of functional attributes, and should not be regarded as a single unit for ecological modelling purposes.

Toward autonomous measurements of photosynthetic electron transport rates: An evaluation of active fluorescence-based measurements of photochemistry

This study presents a methods evaluation and intercalibration of active fluorescence-based measurements of the quantum yield ( inline image) and absorption coefficient ( inline image) of photosystem II (PSII) photochemistry. Measurements of inline image, inline image, and irradiance (E) can be scaled to derive photosynthetic electron transport rates ( inline image), the process that fuels phytoplankton carbon fixation and growth. Bio-optical estimates of inline image and inline image were evaluated using 10 phytoplankton cultures across different pigment groups with varying bio-optical absorption characteristics on six different fast-repetition rate fluorometers that span two different manufacturers and four different models. Culture measurements of inline image and the effective absorption cross section of PSII photochemistry ( inline image, a constituent of inline image) showed a high degree of correspondence across instruments, although some instrument-specific biases are identified. A range of approaches have been used in the literature to estimate inline image and are evaluated here. With the exception of ex situ inline image estimates from paired inline image and PSII reaction center concentration ( inline image) measurements, the accuracy and precision of in situ inline image methodologies are largely determined by the variance of method-specific coefficients. The accuracy and precision of these coefficients are evaluated, compared to literature data, and discussed within a framework of autonomous inline image measurements. This study supports the application of an instrument-specific calibration coefficient ( inline image) that scales minimum fluorescence in the dark ( inline image) to inline image as both the most accurate in situ measurement of inline image, and the methodology best suited for highly resolved autonomous inline image measurements.

Global carbon budget 2014

Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere is important to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe data sets and a methodology to quantify all major components of the global carbon budget, including their uncertainties, based on the combination of a range of data, algorithms, statistics, and model estimates and their interpretation by a broad scientific community. We discuss changes compared to previous estimates, consistency within and among components, alongside methodology and data limitations. CO2 emissions from fossil fuel combustion and cement production (E-FF) are based on energy statistics and cement production data, respectively, while emissions from land-use change (E-LUC), mainly deforestation, are based on combined evidence from land-cover-change data, fire activity associated with deforestation, and models. The global atmospheric CO2 concentration is measured directly and its rate of growth (G(ATM)) is computed from the annual changes in concentration. The mean ocean CO2 sink (S-OCEAN) is based on observations from the 1990s, while the annual anomalies and trends are estimated with ocean models. The variability in S-OCEAN is evaluated with data products based on surveys of ocean CO2 measurements. The global residual terrestrial CO2 sink (S-LAND) is estimated by the difference of the other terms of the global carbon budget and compared to results of independent dynamic global vegetation models forced by observed climate, CO2, and land-cover-change (some including nitrogen-carbon interactions). We compare the mean land and ocean fluxes and their variability to estimates from three atmospheric inverse methods for three broad latitude bands. All uncertainties are reported as +/- 1 sigma, reflecting the current capacity to characterise the annual estimates of each component of the global carbon budget. For the last decade available (2004-2013), E-FF was 8.9 +/- 0.4 GtC yr(-1), E-LUC 0.9 +/- 0.5 GtC yr(-1), G(ATM) 4.3 +/- 0.1 GtC yr(-1), S-OCEAN 2.6 +/- 0.5 GtC yr(-1), and S-LAND 2.9 +/- 0.8 GtC yr(-1). For year 2013 alone, E-FF grew to 9.9 +/- 0.5 GtC yr(-1), 2.3% above 2012, continuing the growth trend in these emissions, E-LUC was 0.9 +/- 0.5 GtC yr(-1), G(ATM) was 5.4 +/- 0.2 GtC yr(-1), S-OCEAN was 2.9 +/- 0.5 GtC yr(-1), and S-LAND was 2.5 +/- 0.9 GtC yr(-1). G(ATM) was high in 2013, reflecting a steady increase in E-FF and smaller and opposite changes between S-OCEAN and S-LAND compared to the past decade (2004-2013). The global atmospheric CO2 concentration reached 395.31 +/- 0.10 ppm averaged over 2013. We estimate that E-FF will increase by 2.5% (1.3-3.5 %) to 10.1 +/- 0.6 GtC in 2014 (37.0 +/- 2.2 GtCO(2) yr(-1)), 65% above emissions in 1990, based on projections of world gross domestic product and recent changes in the carbon intensity of the global economy. From this projection of E-FF and assumed constant E-LUC for 2014, cumulative emissions of CO2 will reach about 545 +/- 55 GtC (2000 +/- 200 GtCO(2)) for 1870-2014, about 75% from E-FF and 25% from E-LUC. This paper documents changes in the methods and data sets used in this new carbon budget compared with previous publications of this living data set (Le Quere et al., 2013, 2014). All observations presented here can be downloaded from the Carbon Dioxide Information Analysis Center (doi:10.3334/CDIAC/GCP_2014).

The ocean sampling day consortium.

Ocean Sampling Day was initiated by the EU-funded Micro B3 (Marine Microbial Biodiversity, Bioinformatics, Biotechnology) project to obtain a snapshot of the marine microbial biodiversity and function of the world's oceans. It is a simultaneous global mega-sequencing campaign aiming to generate the largest standardized microbial data set in a single day. This will be achievable only through the coordinated efforts of an Ocean Sampling Day Consortium, supportive partnerships and networks between sites. This commentary outlines the establishment, function and aims of the Consortium and describes our vision for a sustainable study of marine microbial communities and their embedded functional traits.

Swirl Flow Bioreactor coupled with Cu-alginate beads: A system for the eradication of Coliform and Escherichia coli from biological effluents

It is estimated that approximately 1.1 billion people globally drink unsafe water. We previously reported both a novel copper-alginate bead, which quickly reduces pathogen loading in waste streams and the incorporation of these beads into a novel swirl flow bioreactor (SFB), of low capital and running costs and of simple construction from commercially available plumbing pipes and fittings. The purpose of the present study was to trial this system for pathogen reduction in waste streams from an operating Dewats system in Hinjewadi, Pune, India and in both simulated and real waste streams in Seattle, Washington, USA. The trials in India, showed a complete inactivation of coliforms in the discharged effluent (Mean Log removal Value (MLRV) = 3.51), accompanied by a total inactivation of E. coli with a MLRV of 1.95. The secondary clarifier effluent also showed a 4.38 MLRV in viable coliforms during treatment. However, the system was slightly less effective in reducing E. coli viability, with a MLRV of 1.80. The trials in Seattle also demonstrated the efficacy of the system in the reduction of viable bacteria, with a LRV of 5.67 observed of viable Raoultella terrigena cells (100%).

A comparison between ultraviolet disinfection and copper alginate beads within a vortex bioreactor for the deactivation of bacteria in simulated waste streams with high levels of colour, humic acid and suspended solids

We show in this study that the combination of a swirl flow reactor and an antimicrobial agent (in this case copper alginate beads) is a promising technique for the remediation of contaminated water in waste streams recalcitrant to UV-C treatment. This is demonstrated by comparing the viability of both common and UV-C resistant organisms in operating conditions where UV-C proves ineffective - notably high levels of solids and compounds which deflect UV-C. The swirl flow reactor is easy to construct from commonly available plumbing parts and may prove a versatile and powerful tool in waste water treatment in developing countries.

The bactericidal effect of dendritic copper microparticles, contained in an alginate matrix, on Escherichia coli

Although the bactericidal effect of copper has been known for centuries, there is a current resurgence of interest in the use of this element as an antimicrobial agent. During this study the use of dendritic copper microparticles embedded in an alginate matrix as a rapid method for the deactivation of Escherichia coli ATCC 11775 was investigated. The copper/alginate produced a decrease in the minimum inhibitory concentration from free copper powder dispersed in the media from 0.25 to 0.065 mg/ml. Beads loaded with 4% Cu deactivated 99.97% of bacteria after 90 minutes, compared to a 44.2% reduction in viability in the equivalent free copper powder treatment. There was no observed loss in the efficacy of this method with increasing bacterial loading up to 10(6) cells/ml, however only 88.2% of E. coli were deactivated after 90 minutes at a loading of 10(8) cells/ml. The efficacy of this method was highly dependent on the oxygen content of the media, with a 4.01% increase in viable bacteria observed under anoxic conditions compared to a >99% reduction in bacterial viability in oxygen tensions above 50% of saturation. Scanning electron micrographs (SEM) of the beads indicated that the dendritic copper particles sit as discrete clusters within a layered alginate matrix, and that the external surface of the beads has a scale-like appearance with dendritic copper particles extruding. E. coli cells visualised using SEM indicated a loss of cellular integrity upon Cu bead treatment with obvious visible blebbing. This study indicates the use of microscale dendritic particles of Cu embedded in an alginate matrix to effectively deactivate E. coli cells and opens the possibility of their application within effective water treatment processes, especially in high particulate waste streams where conventional methods, such as UV treatment or chlorination, are ineffective or inappropriate.

An unusually large phytoplankton spring bloom drives rapid changes in benthic diversity and ecosystem function

In 2012, the Western English Channel experienced an unusually large and long-lived phytoplankton spring bloom. When compared with data from the past 20 years, average phytoplankton biomass at Station L4 (part of the Western Channel Observatory) was approximately 3× greater and lasted 50% longer than any previous year. Regular (mostly weekly) box core samples were collected from this site before, during and after the bloom to determine its impact on macrofaunal abundance, diversity, biomass, community structure and function. The spring bloom of 2012 was shown to support a large and rapid response in the majority of benthic taxa and functional groups. However, key differences in the precise nature of this response, as well as in its timing, was observed between different macrofauna feeding groups. Deposit feeders responded almost instantly at the start of the bloom, primarily thorough an increase in abundance. Suspension feeders and opportunistic/predatory/carnivorous taxa responded slightly more slowly and primarily with an increase in biomass. At the end of the bloom a rapid decline in macrobenthic abundance, diversity and biomass closely followed the decline in phytoplankton biomass. With suspension feeders showing evidence of this decline a few weeks before deposit feeders, it was concluded that this collapse in benthic communities was driven primarily by food availability and competition. However, it is possible that environmental hypoxia and the presence of toxic benthic cyanobacteria could also have contributed to this decline. This study shows evidence for strong benthic–pelagic coupling at L4; a shallow (50 m), coastal, fine-sand habitat. It also demonstrates that in such habitats, it is not just planktonic organisms that demonstrate clear community phenology. Different functional groups within the benthic assemblage will respond to the spring bloom in specific manner, with implications for key ecosystem functions and processes, such as secondary production and bioturbation. Only by taking integrated benthic and pelagic observations over such fine temporal scales (weekly) was the current study able to identify the intimate structure of the benthic response. Similar studies from other habitats and under different bloom conditions are urgently needed to fully appreciate the strength of benthic–pelagic coupling in shallow coastal environments.

Making modelling count - increasing the contribution of shelf-seas community and ecosystem models to policy development and management

Marine legislation is becoming more complex and marine ecosystem-based management is specified in national and regional legislative frameworks. Shelf-seas community and ecosystem models (hereafter termed ecosystem models) are central to the delivery of ecosystem-based management, but there is limited uptake and use of model products by decision makers in Europe and the UK in comparison with other countries. In this study, the challenges to the uptake and use of ecosystem models in support of marine environmental management are assessed using the UK capability as an example. The UK has a broad capability in marine ecosystem modelling, with at least 14 different models that support management, but few examples exist of ecosystem modelling that underpin policy or management decisions. To improve understanding of policy and management issues that can be addressed using ecosystem models, a workshop was convened that brought together advisors, assessors, biologists, social scientists, economists, modellers, statisticians, policy makers, and funders. Some policy requirements were identified that can be addressed without further model development including: attribution of environmental change to underlying drivers, integration of models and observations to develop more efficient monitoring programmes, assessment of indicator performance for different management goals, and the costs and benefit of legislation. Multi-model ensembles are being developed in cases where many models exist, but model structures are very diverse making a standardised approach of combining outputs a significant challenge, and there is a need for new methodologies for describing, analysing, and visualising uncertainties. A stronger link to social and economic systems is needed to increase the range of policy-related questions that can be addressed. It is also important to improve communication between policy and modelling communities so that there is a shared understanding of the strengths and limitations of ecosystem models.