The numerical modelling of multi-physics phenomena: The shape casting process

In this paper a computer simulation tool capable of modelling multi-physics processes in complex geometry has been developed and applied to the casting process. The quest for high-quality complex casting components demanded by the aerospace and automobile industries, requires more precise numerical modelling techniques and one that need to be generic and modular in its approach to modelling multi-processes problems. For such a computer model to be successful in shape casting, the complete casting process needs to be addressed, the major events being:-• Filling of hot liquid metal into a cavity mould • Solidification and latent heat evolution of liquid metal • Convection currents generated in liquid metal by thermal gradients • Deformation of cast and stress development in solidified metal • Macroscopic porosity formation The above phenomena combines the analysis of fluid flow, heat transfer, change of phase and thermal stress development. None of these events can be treated in isolation as they inexorably interact with each other in a complex way. Also conditions such as design of running system, location of feeders and chills, moulding materials and types of boundary conditions can all affect on the final cast quality and must be appropriately represented in the model.

Multilevel mesh partitioning for optimizing domain shape

Multilevel algorithms are a successful class of optimization techniques that address the mesh partitioning problem for mapping meshes onto parallel computers. They usually combine a graph contraction algorithm together with a local optimization method that refines the partition at each graph level. To date, these algorithms have been used almost exclusively to minimize the cut-edge weight in the graph with the aim of minimizing the parallel communication overhead. However, it has been shown that for certain classes of problems, the convergence of the underlying solution algorithm is strongly influenced by the shape or aspect ratio of the subdomains. Therefore, in this paper, the authors modify the multilevel algorithms to optimize a cost function based on the aspect ratio. Several variants of the algorithms are tested and shown to provide excellent results.

Shape-optimized mesh partitioning and load balancing for parallel adaptive FEM

We present a dynamic distributed load balancing algorithm for parallel, adaptive Finite Element simulations in which we use preconditioned Conjugate Gradient solvers based on domain-decomposition. The load balancing is designed to maintain good partition aspect ratio and we show that cut size is not always the appropriate measure in load balancing. Furthermore, we attempt to answer the question why the aspect ratio of partitions plays an important role for certain solvers. We define and rate different kinds of aspect ratio and present a new center-based partitioning method of calculating the initial distribution which implicitly optimizes this measure. During the adaptive simulation, the load balancer calculates a balancing flow using different versions of the diffusion algorithm and a variant of breadth first search. Elements to be migrated are chosen according to a cost function aiming at the optimization of subdomain shapes. Experimental results for Bramble's preconditioner and comparisons to state-of-the-art load balancers show the benefits of the construction.

A computational model for defect prediction in shape castings based on the interaction of free surface flow, heat transfer, and solidification phenomena

High-integrity castings require sophisticated design and manufacturing procedures to ensure they are essentially macrodefect free. Unfortunately, an important class of such defects—macroporosity, misruns, and pipe shrinkage—are all functions of the interactions of free surface flow, heat transfer, and solidication in complex geometries. Because these defects arise as an interaction of the preceding continuum phenomena, genuinely predictive models of these defects must represent these interactions explicitly. This work describes an attempt to model the formation of macrodefects explicitly as a function of the interacting continuum phenomena in arbitrarily complex three-dimensional geometries. The computational approach exploits a compatible set of finite volume procedures extended to unstructured meshes. The implementation of the model is described together with its testing and a measure of validation. The model demonstrates the potential to predict reliably shrinkage macroporosity, misruns, and pipe shrinkage directly as a result of interactions among free-surface fluid flow, heat transfer, and solidification.

Two-machine open shop scheduling with an availability constraint

We study a two-machine open shop scheduling problem, in which one machine is not available for processing during a given time interval. The objective is to minimize the makespan. We show that the problem is NP-hard and present an approximation algorithm with a worst-case ratio of 4/3.

Macro-segregation of multi-component alloys in shape casting simulation

The objective of this work is to present a new scheme for temperature-solute coupling in a solidification model, where the temperature and concentration fields simultaneously satisfy the macro-scale transport equations and, in the mushy region, meet the constraints imposed by the thermodynamics and the local scale processes. A step-by-step explanation of the macrosegregation algorithm, implemented in the finite volume unstructured mesh multi-physics modelling code PHYSICA, is initially presented and then the proposed scheme is validated against experimental results obtained by Krane for binary and a ternary alloys.

Computational modeling of mold filling and related free-surface flows in shape casting: an overview of the challenges involved

Accurate representation of the coupled effects between turbulent fluid flow with a free surface, heat transfer, solidification, and mold deformation has been shown to be necessary for the realistic prediction of several defects in castings and also for determining the final crystalline structure. A core component of the computational modeling of casting processes involves mold filling, which is the most computationally intensive aspect of casting simulation at the continuum level. Considering the complex geometries involved in shape casting, the evolution of the free surface, gas entrapment, and the entrainment of oxide layers into the casting make this a very challenging task in every respect. Despite well over 30 years of effort in developing algorithms, this is by no means a closed subject. In this article, we will review the full range of computational methods used, from unstructured finite-element (FE) and finite-volume (FV) methods through fully structured and block-structured approaches utilizing the cut-cell family of techniques to capture the geometric complexity inherent in shape casting. This discussion will include the challenges of generating rapid solutions on high-performance parallel cluster technology and how mold filling links in with the full spectrum of physics involved in shape casting. Finally, some indications as to novel techniques emerging now that can address genuinely arbitrarily complex geometries are briefly outlined and their advantages and disadvantages are discussed.

Characterizing the most general temporal constraint

This paper introduces a characterization of the so-called most general temporal constraint (GTC), which guarantees the common-sense assertion that "the beginning of the effect cannot precede the beginning of the cause". The formalism is based on general time theory which takes both points and intervals as primitive. It is shown that there are in fact 8 possible causal relationships which satisfy GTC, including cases where, on the one hand, effects start simultaneously with, during, immediately after, or some time after their causes, and on the other hand, events end before, simultaneously with, or after their causes. These causal relationships are versatile enough to subsume those representatives in the literature.

A price worth paying?: Women and work – choice, constraint or satisficing

Purpose – Are women held back or holding back? Do women choose their jobs/careers or are they structurally or normatively constrained? The purpose of this paper is to shed fresh light on these questions and contribute to an on-going debate that has essentially focused on the extent to which part-time work is women’s choice, the role of structural and organisational constraints and the role of men in excluding women. Design/methodology/approach – The paper uses data from interviews with 80 working women – both full-time and part-time – performing diverse work roles in a range of organisations in the south east of England. Findings – It was found that many women do not make strategic job choices, rather they often ‘‘fall into’’ jobs that happen to be available to them. Some would not have aspired to their present jobs without male encouragement; many report incidents of male exclusion; and virtually all either know or suspect that they are paid less than comparable men. Those working reduced hours enjoy that facility, yet they are aware that reduced hours and senior roles are seen as incompatible. In short, they recognise both the positive and negative aspects of their jobs, whether they work full or part-time, whether they work in male-dominated or female-dominated occupations, and whatever their position in the organisational hierarchy. Accordingly, the paper argues that the concept of ‘‘satisficing’’, i.e. a decision which is good enough but not optimal, is a more appropriate way to view women’s working lives than are either choice or constraint theories. Originality/value – There is an ongoing, and often polarised, debate between those who maintain that women choose whether to give preference to work or home/family and others who maintain that women, far from being self-determining actors, are constrained structurally and normatively. Rather than supporting these choice or constraint theories, this paper argues that ‘‘satisficing’’ is a more appropriate and nuanced concept to explain women’s working lives.

Mode shape expansion using perturbed force vector approach

A new technique for mode shape expansion in structural dynamic applications is presented based on the perturbed force vector approach. The proposed technique can directly adopt the measured incomplete modal data and include the effect of the perturbation between the analytical and test models. The results show that the proposed technique can provide very accurate expanded mode shapes, especially in cases when significant modelling error exists in the analytical model and limited measurements are available.