A comprehensive copper stockpile leach model: background and parameter sensitivity

The design and development of a comprehensive computational model of a copper stockpile leach process is summarized. The computational fluid dynamic software framework PHYSICA+ and various phenomena were used to model transport phenomena, mineral reaction kinetics, bacterial effects, and heat, energy and acid balances for the overall leach process. In this paper, the performance of the model is investigated, in particular its sensitvity to particle size and ore permeability. A combination of literature and laboratory sources was used to parameterize the model. The simulation results from the leach model are compared with closely controlled column pilot scale tests. The main performance characteristics (e.g. copper recovery rate) predicted by the model compare reasonably well with the experimental data and clearly reflect the qualitiative behavior of the process in many respects. The model is used to provide a measure of the sensitivity of ore permeability on leach behavior, and simulation results are examined for several different particle size distributions.

Analysis of the structural characteristics of an intermediate rail vehicle and their effect on vehicle crash performance

In the current paper, the authors present an analysis of the structural characteristics of an intermediate rail vehicle and their effects on crash performance of the vehicle. Theirs is a simulation based analysis involving four stages. First, the crashworthiness of the vehicle is assessed by simulating an impact of the vehicle with a rigid wall. Second, the structural characteristics of the vehicle are analysed based on the structural behaviour during this impact and then the structure is modified. Third, the modified vehicle is tested again in the same impact scenario with a rigid wall. Finally, the modified vehicle is subjected to a modelled head-on impact which mirrors the real-life impact interface between two intermediate vehicles in a train impact. The emphasis of the current study is on the structural characteristics of the intermediate vehicle and the differences compared to an impact of a leading vehicle. The study shows that, similar to a leading vehicle, bending, or jackknifing is a main form of failure in this conventionally designed intermediate vehicle. It has also been found that the location of the door openings creates a major difference in the behaviour of an intermediate vehicle. It causes instability of the vehicle in the door area and leads to high stresses at the joint of the end beam with the solebar and shear stresses at the joint of the inner pillar with the cantrail. Apart from this, the shapes of the vehicle ends and impact interfaces are also different and have an effect on the crash performance of the vehicles. The simulation results allow the identification of the structural characteristics and show the effectiveness of relevant modifications. The conclusions have general relevance for the crashworthiness of rail vehicle design

Effect of long-term aging on the rheological characteristics and printing performance of lead-free solder pastes used for flip-chip assembly

Stencil printing of solder pastes is a critical stage in the SMT assembly process as a high proportion of the solder-related defects can be attributed to this stage. As the trend towards product miniaturization continues, there is a greater need for better understanding of the rheological behaviour and printing performance of new paste formulations. This fundamental understanding is crucial for achieving the repeatable solder paste deposits from board-to-board and pad-to-pad required for more reliable solder interconnections. The paper concerns a study on the effect of ageing on the rheological characteristics and printing performance of new lead-free solder pastes formulations used for flip-chip assembly applications. The objective is to correlate the rheological characteristics of aged paste samples to their printing performance. The methodology developed can be used for bench-marking new lead-free paste formulations in terms of shelf life, the potential deterioration in rheological characteristics and their printing performance.

Performance analysis of a register insertion ring with a variable size buffer

There has been a recent revival of interest in the register insertion (RI) protocol because of its high throughput and low delay characteristics. Several variants of the protocol have been investigated with a view to integrating voice and data applications on a single local area network (LAN). In this paper the performance of an RI ring with a variable size buffer is studied by modelling and simulation. The chief advantage of the proposed scheme is that an efficient but simple bandwidth allocation scheme is easily incorporated. Approximate formulas are derived for queue lengths, queueing times, and total end-to-end transfer delays. The results are compared with previous analyses and with simulation estimates. The effectiveness of the proposed protocol in ensuring fairness of access under conditions of heavy and unequal loading is investigated.

An investigation into regional differences in educational performance in the National Child Development Study

The National Child Development Study (NCDS) is used to investigate factors which affect children's educational performance over time. Multilevel modelling techniques are used on a subset of the NCDS to investigate variation in educational performance in 11 regions in the UK, and in local education authorities within these regions. Social characteristics of the NCDS members are also analysed. Differences between regions and education authorities are found to be negligible, the main source of variation in achievement being due to differences in social background.

Computational modelling of multi-physics processes on high performance parallel computer systems

The demands of the process of engineering design, particularly for structural integrity, have exploited computational modelling techniques and software tools for decades. Frequently, the shape of structural components or assemblies is determined to optimise the flow distribution or heat transfer characteristics, and to ensure that the structural performance in service is adequate. From the perspective of computational modelling these activities are typically separated into: • fluid flow and the associated heat transfer analysis (possibly with chemical reactions), based upon Computational Fluid Dynamics (CFD) technology • structural analysis again possibly with heat transfer, based upon finite element analysis (FEA) techniques.

Parallel bandwidth characteristics calculations for thin avalanche photodiodes on a SGI Origin 2000 supercomputer

An important factor for high-speed optical communication is the availability of ultrafast and low-noise photodetectors. Among the semiconductor photodetectors that are commonly used in today’s long-haul and metro-area fiber-optic systems, avalanche photodiodes (APDs) are often preferred over p-i-n photodiodes due to their internal gain, which significantly improves the receiver sensitivity and alleviates the need for optical pre-amplification. Unfortunately, the random nature of the very process of carrier impact ionization, which generates the gain, is inherently noisy and results in fluctuations not only in the gain but also in the time response. Recently, a theory characterizing the autocorrelation function of APDs has been developed by us which incorporates the dead-space effect, an effect that is very significant in thin, high-performance APDs. The research extends the time-domain analysis of the dead-space multiplication model to compute the autocorrelation function of the APD impulse response. However, the computation requires a large amount of memory space and is very time consuming. In this research, we describe our experiences in parallelizing the code in MPI and OpenMP using CAPTools. Several array partitioning schemes and scheduling policies are implemented and tested. Our results show that the code is scalable up to 64 processors on a SGI Origin 2000 machine and has small average errors.

Investigation into the performance of turbulence models for fluid flow and heat transfer phenomena in electronic applications

Heat is extracted away from an electronic package by convection, conduction, and/or radiation. The amount of heat extracted by forced convection using air is highly dependent on the characteristics of the airflow around the package which includes its velocity and direction. Turbulence in the air is also important and is required to be modeled accurately in thermal design codes that use computational fluid dynamics (CFD). During air cooling the flow can be classified as laminar, transitional, or turbulent. In electronics systems, the flow around the packages is usually in the transition region, which lies between laminar and turbulent flow. This requires a low-Reynolds number numerical model to fully capture the impact of turbulence on the fluid flow calculations. This paper provides comparisons between a number of turbulence models with experimental data. These models included the distance from the nearest wall and the local velocity (LVEL), Wolfshtein, Norris and Reynolds, k-ε, k-ω, shear-stress transport (SST), and kε/kl models. Results show that in terms of the fluid flow calculations most of the models capture the difficult wake recirculation region behind the package reasonably well, although for packages whose heights cause a high degree of recirculation behind the package the SST model appears to struggle. The paper also demonstrates the sensitivity of the models to changes in the mesh density; this study is aimed specifically at thermal design engineers as mesh independent simulations are rarely conducted in an industrial environment.

Rheological characterisation and printing performance of Sn/Ag/Cu solder pastes

Lead-free solder paste printing process accounts for majority of the assembly defects in the electronic manufacturing industry. The study investigates rheological behaviour and stencil printing performance of the lead-free solder pastes (Sn/Ag/Cu). Oscillatory stress sweep test was carried out to study the visco-elastic behaviour of the lead-free solder pastes. The visco-elastic behaviour of the paste encompasses solid and liquid characteristic of the paste, which could be used to study the flow behaviour experienced by the pastes during the stencil printing process. From this study, it was found that the solid characteristics (G0) is higher than the liquid characteristic (G0 0) for the pastes material. In addition, the results from the study showed that the solder paste with a large G0 = G0 0 has a higher cohesiveness resulting in poor withdrawal of the paste during the stencil printing process. The phase angles (d) was used to correlate the quality of the dense suspensions to the formulation of solder paste materials. This study has revealed the value of having a rheological measurement for explaining and characterising solder pastes for stencil printing. As the demand for lead free pastes increases rheological measurements can assist with the formulation or development of new pastes.

What a performance! Developing nurse teachers lecturing persona and identity: a performing arts perspective

Delivering lectures to large groups of students can provoke high levels of anxiety, particularly for new lecturers (Exley and Dennick, 2009). Further, to provide an informative and engaging lecture requires a teacher who is confident, has a sound knowledge and well developed teaching skills (Bentley-Davies, 2010). Thus, new lecturers often need experience and supervision to develop the tacit knowledge and insight into their own style and persona when teaching in order to feel confident when delivering a lecture (Quinn and Hughes, 2007). Considering this model, therefore, may potentially contribute to a lecturers’ development and performance in the classroom. This paper will present the results of the second phase of a two-stage mixed method study that investigated the similarities between lecturing and acting. Twelve in-depth interviews where undertaken with lecturers within one School of Nursing in The United Kingdom. Findings, established a model of ‘persona adoption’ that represents a series of stages that lecturers may go through to both develop and take on a persona when lecturing. This persona is often different from the way they lecturers present themselves in other parts of their working life. The first stage of this model of persona adoption is when the lecturer is subjected to a range of ‘influencing factors’ that provide not only the basic information about a lecture, but also the perceptual stimuli about giving a lecture on a specific subject, to a particular number of students, at a certain academic level. These influencing factors then inter-play with the ‘facets of the individual’, which represent the lecturer’s self-concept, subject knowledge base and philosophy of teaching. This may result in a cognitive dissonance between these ‘facets’ and the ‘influencing factors’, so affecting the lecturers’ perceptions, thoughts and feelings about having to give that particular lecture. This results in the lecturer undertaking specific ‘back stage preparation’ during which they decide on the content and modes of delivery to prepare in light of that discourse. It may result in delivering the information via single or multiple methods, which during the lecture will require various levels of interaction and participation from the students. Just prior to the lecture, the lecturer builds or ‘puts on their persona’ and gets into role, making their initial impact with the group. They use the ‘elements of acting’ as proposed by Tauber and Mester’s (1994) e.g. animated voice and body, space, props humour and suspense and surprise to portray and maintain their persona. This leads the to lecturer demonstrating either positive or negative ‘persona characteristics’ in terms of appearing confident, knowledgeable, fluent in the technical skills of delivering the lecture, being interesting and engendering interaction with the students, or not. These characteristics, may or may not, potentially heighten student interest, attention and attitudes to learning as suggested by Tauber and Mester (1994). This depends on whether the lecturer has successfully used the persona and if the lecturer has been able to engage students in the lecture, in competition with other factors that may be taking the students’ attention. Although the model suggests a linear process, to a great extent, the elements might be more interdependent and interrelated. This might suggest that depending on the lecturer’s perception of their effectiveness during the lecture, that they may decide to continue or adapt their persona and methods to appear more confident. Furthermore, depending on how successful the lecturer perceived the session to be, both their reflections ‘in’ and ‘on’ practice could influence how they teach in the future (Zwozdiak, 2011). Therefore, these reflections become part of the facets of the individual, via the ‘reflective feedback loop’, in the model, which then in turn influences progression through the model in subsequent lectures. This study concluded that these lecturers went through a process whereby they compare the demands of the lecture with their own knowledge base and skill, this resulted in them undertaking specific preparation in terms of content and delivery style, then they adopted their persona immediately prior to entering the lecture, maintain it throughout the lecture via the use of the elements of acting to achieve an informative interactive lecture. The results of which then feedback into their self-concept as a lecturer and consequently may affect the persona they project in future lectures. If lecturers, therefore, can take a step back to consider how they deliver lectures and the way they can deliberately, yet apparently naturally, use their voices, bodies, space and humour in meaningfully, they engage their students in lecture, it will not just result in them being perceived as a good lecturer, but also be a genuine act of education.

The determinants of business performance of estate agency in England and Wales

Purpose: This paper seeks to investigate the factors influencing the business performance of estate agency in England and Wales. Design/methodology/approach: The paper investigates the effect of housing market, company size and pricing policy on business performance in the estate agency sector in England and Wales. The analysis uses the survey data of Woolwich Cost of Moving Survey (a survey of transactions costs sponsored by the Woolwich/Barclays Bank) from 2003 to 2005 to test the hypothesis that the business performance of estate agency is affected by industry characteristics and firm factors. Findings: The empirical analysis indicates that the business performance of estate agency is subject to market environment volatility such as market uncertainty, housing market liquidity and house price changes. The firm factors such as firm size and the level of agency fee have no explanatory power in explaining business performance. The level of agency fee is positively associated with firm size, market environment and liquidity. Research limitations/implications: The research is limited to the data received and is based on a research project on transaction costs designed prior to this analysis. Originality/value: There is little other research that investigates the factors determining the business performance of estate agency, using consecutive data of three years across England and Wales. The findings are useful for practitioners and/or managers to allocate resources and adjust their business strategy to enhance business performance in the estate agency sector.