"Practise what we preach": a social constructivist approach to blended learning

This presentation reports on the formal evaluation, through questionnaires, of a new Level 1 undergraduate course, for 130 student teachers, that uses blended learning. The course design seeks to radicalise the department’s approach to teaching, learning and assessment and use students as change agents. Its structure and content, model social constructivist approaches to learning. Building on the student’s experiences of and, reflections on, previous learning, promotes further learning through the support of “able others” (Vygotsky 1978), facilitating and nurturing a secure community of practice for students new to higher education. The course’s design incorporates individual, paired, small and large group activities and exploits online video, audio and text materials. Course units begin and end with face-to-face tutor-led activities. Online elements, including discussions and formative submissions, are tutor-mediated. Students work together face-to-face and online to read articles, write reflections, develop presentations, research and share experiences and resources. Summative joint assignments and peer assessments emphasise the value of collaboration and teamwork for academic, personal and professional development. Initial informal findings are positive, indicating that students have engaged readily with course content and structure, with few reporting difficulties accessing or using technology. Students have welcomed the opportunity to work together to tackle readings in a new genre, pilot presentation skills and receive and give constructive feedback to peers. Course tutors have indicated that depth and quality of study are evident, with regular online formative submissions enabling tutors to identify and engage directly with student’s needs, provide feedback and develop appropriately designed distance and face-to-face teaching materials. Pastoral tutors have indicated that students have reported non-engagement of peers, leading to the rapid application of academic or personal support. Outcomes of the formal evaluation will inform the development of Level 2 and 3 courses and influence the department’s use of blended learning.

Association of fever and severe clinical course in bronchiolitis

Little attention has been given to the relation between fever and the severity of bronchiolitis. Therefore, the relation between fever and the clinical course of 90 infants (59 boys, 31 girls) hospitalised during one season with bronchiolitis was studied prospectively. Fever (defined as a single recording > 38.0°C or two successive recording > 37.8°C) was present in 28 infants. These infants were older (mean age, 5.3 v 4.0 months), had a longer mean hospital stay (4.2 v2.7 days), and a more severe clinical course (71.0%v 29.0%) than those infants without fever. Radiological abnormalities (collapse/consolidation) were found in 60.7% of the febrile group compared with 14.8% of the afebrile infants. These results suggest that monitoring of body temperature is important in bronchiolitis and that fever is likely to be associated with a more severe clinical course and radiological abnormalities.

Virtual manufacturing and design in the real world - implementation and scalability on HPPC systems

Virtual manufacturing and design assessment increasingly involve the simulation of interacting phenomena, sic. multi-physics, an activity which is very computationally intensive. This chapter describes an attempt to address the parallel issues associated with a multi-physics simulation approach based upon a range of compatible procedures operating on one mesh using a single database - the distinct physics solvers can operate separately or coupled on sub-domains of the whole geometric space. Moreover, the finite volume unstructured mesh solvers use different discretization schemes (and, particularly, different ‘nodal’ locations and control volumes). A two-level approach to the parallelization of this simulation software is described: the code is restructured into parallel form on the basis of the mesh partitioning alone, that is, without regard to the physics. However, at run time, the mesh is partitioned to achieve a load balance, by considering the load per node/element across the whole domain. The latter of course is determined by the problem specific physics at a particular location.

[Book review] Chance encounters: a first course in data analysis and inference

Book review of: Chance Encounters: A First Course in Data Analysis and Inference by Christopher J. Wild and George A.F. Seber 2000, John Wiley & Sons Inc. Hard-bound, xviii + 612 pp ISBN 0-471-32936-3

Modelling induction skull melting design modifications

Induction Skull Melting (ISM) is used for heating, melting, mixing and, possibly, evaporating reactive liquid metals at high temperatures when a minimum contact at solid walls is required. The numerical model presented here involves the complete time dependent process analysis based on the coupled electromagnetic, temperature and turbulent velocity fields during the melting and liquid shape changes. The simulation is validated against measurements of liquid metal height, temperature and heat losses in a commercial size ISM furnace. The often observed limiting temperature plateau for ever increasing electrical power input is explained by the turbulent convective heat losses. Various methods to increase the superheat within the liquid melt, the process energy efficiency and stability are proposed.

Case-based retrieval of 3-dimensional shapes for the design of metal castings

This paper describes research into retrieval based on 3-dimensional shapes for use in the metal casting industry. The purpose of the system is to advise a casting engineer on the design aspects of a new casting by reference to similar castings which have been prototyped and tested in the past. The key aspects of the system are the orientation of the shape within the mould, the positions of feeders and chills, and particular advice concerning special problems and solutions, and possible redesign. The main focus of this research is the effectiveness of similarity measures based on 3-dimensional shapes. The approach adopted here is to construct similarity measures based on a graphical representation deriving from a shape decomposition used extensively by experienced casting design engineers. The paper explains the graphical representation and discusses similarity measures based on it. Performance measures for the CBR system are given, and the results for trials of the system are presented. The competence of the current case-base is discussed, with reference to a representation of cases as points in an n-dimensional feature space, and its principal components visualization. A refinement of the case base is performed as a result of the competence analysis and the performance of the case-base before and after refinement is compared.

Semantic and conceptual structures in module design

This paper describes the employment of semantic and conceptual structures in module design, specifically course modules. Additionally, it suggests other uses of these structures in aiding teaching and learning.

Integrating personnel movement simulation into prelimary ship design

Traditionally, when designing a ship the driving issues are seen to be powering, stability, strength and seakeeping. Issues related to ship operations and evolutions are investigated later in the design process, within the constraint of a fixed layout. This can result in operational inefficiencies and limitations, excessive crew numbers and potentially hazardous situations. This paper summarises work by University College London and the University of Greenwich prior to the completion of a three year EPSRC funded research project to integrate the simulation of personnel movement into early stage ship design. This integration is intended to facilitate the assessment of onboard operations while the design is still highly amenable to change. The project brings together the University of Greenwich developed maritimeEXODUS personnel movement simulation software and the SURFCON implementation of the Design Building Block approach to early stage ship design, which originated with the UCL Ship Design Research team and has been implemented within the PARAMARINE ship design system produced by Graphics Research Corporation. Central to the success of this project is the definition of a suitable series of Performance Measures (PM) which can be used to assess the human performance of the design in different operational scenarios. The paper outlines the progress made on deriving the PM from human dynamics criteria measured in simulations and their incorporation into a Human Performance Metric (HPM) for analysis. It describes the production of a series of SURFCON ship designs, based on the Royal Navy’s Type 22 Batch 3 frigate, and their analysis using the PARAMARINE and maritimeEXODUS software. Conclusions on the work to date and for the remainder of the project are presented addressing the integration of personnel movement simulation into the preliminary ship design process.

Risk mitigation framework for a robust design process

The increasing complexity of new manufacturing processes and the continuously growing range of fabrication options mean that critical decisions about the insertion of new technologies must be made as early as possible in the design process. Mitigating the technology risks under limited knowledge is a key factor and major requirement to secure a successful development of the new technologies. In order to address this challenge, a risk mitigation methodology that incorporates both qualitative and quantitative analysis is required. This paper outlines the methodology being developed under a major UK grand challenge project - 3D-Mintegration. The main focus is on identifying the risks through identification of the product key characteristics using a product breakdown approach. The assessment of the identified risks uses quantification and prioritisation techniques to evaluate and rank the risks. Traditional statistical process control based on process capability and six sigma concepts are applied to measure the process capability as a result of the risks that have been identified. This paper also details a numerical approach that can be used to undertake risk analysis. This methodology is based on computational framework where modelling and statistical techniques are integrated. Also, an example of modeling and simulation technique is given using focused ion beam which is among the investigated in the project manufacturing processes.

Design for reliability for wafer level system in package

This paper discusses the Design for Reliability modelling of several System-in-Package (SiP) structures developed by NXP and advanced on the basis of Wafer Level Packaging (WLP). Two different types of Wafer Level SiP (WLSiP) are presented and discussed. The main focus is on the modelling approach that has been adopted to investigate and analyse the board level reliability of the presented SiP configurations. Thermo-mechanical non-linear Finite Element Analysis (FEA) is used to analyse the effect of various package design parameters on the reliability of the structures and to identify design trends towards package optimisation. FEA is used also to gain knowledge on moulded wafer shrinkage and related issues during the wafer level fabrication. The paper provides a brief outline and demonstration of a design methodology for reliability driven design optimisation of SiP. The study emphasises the advantages of applying the methodology to address complex design problems where several requirements may exist and uncertainties and interactions between parameters in the design are common.

Modelling and prototyping the conceptual design of 3D CMM micro-probe

This paper details the prototyping of a novel three axial micro probe based on utilisation of piezoelectric sensors and actuators for true three dimensional metrology and measurements at micro- and nanometre scale. Computational mechanics is used first to model and simulate the performance of the conceptual design of the micro-probe. Piezoelectric analysis is conducted to understand performance of three different materials - silicon, glassy carbon, and nickel - and the effect of load parameters (amplitude, frequency, phase angle) on the magnitude of vibrations. Simulations are also used to compare several design options for layout of the lead zirconium titanate (PZT) sensors and to identify the most feasible from fabrication point of view design. The material options for the realisation of the device have been also tested. Direct laser machining was selected as the primary means of production. It is found that a Yb MOPA based fiber laser was capable of providing the necessary precision on glassy carbon (GC), although machining trials on Si and Ni were less successful due to residual thermal effects.To provide the active and sensing elements on the flexures of the probe, PZT thick films are developed and deposited at low temperatures (Lt720 degC) allowing a high quality functional ceramic to be directly integrated with selected materials. Characterisation of the materials has shown that the film has a homogenous and small pore microstructure.

Design, modeling and characterization of a microinductor for future DC-DC power converters

Experimental, analytical and simulated data are presented in this article to assess the performance of electrodeposited nickel-iron within a novel solenoid microinductor. A design flowchart highlights the primary design principles when developing a microscale magnetic component for DC-DC power converters. Thermal modeling is used to predict the operational conditions that generate undesirable thermal generation within the component. Operating at 0.5MHz, the microinductor achieves an efficiency and power density of 78% and 7.8 W/cm3, respectively.

Reading the landscape: the development of a typology of literary trails to inform experiential design

This article explores the under-researched field of self-guided trails. The focus of the research is on the experiential aspects of self-guided literary trails from the perspective of both the developer and user. An examination of existing literature on self-guided trails and literary tourism was undertaken and supplemented with a review of experiential design principles. Content analysis of a sample of literary heritage trails was then carried out and three distinctive typologies were developed, informed by aspects of experiential design. The research reveals that few literary trails developers utilise these principles and the article concludes with proposals for the design of more effective literary trail experiences.

Capturing teachers' experience of learning design through case studies

This article distinguishes three dimensions to learning design: a technological infrastructure, a conceptual framework for practice that focuses on the creation of structured sequences of learning activities, and a way to represent and share practice through the use of mediating artefacts. Focusing initially on the second of these dimensions, the article reports the key findings from an exploratory study, eLIDA CAMEL. This project examined a hitherto under-researched aspect of learning design: what teachers who are new to the domain perceive to be its value as a framework for practice in the design of both flexible and classroom-based learning. Data collection comprised 13 case studies constructed from participants' self-reports. These suggest that providing students with a structured sequence of learning activities was the major value to teachers. The article additionally discusses the potential of such case studies to function as mediating artefacts for practitioners who are considering experimenting with learning design.

Manufacturing knowledge verification in design support systems

This paper identifies the need for a verification methodology for manufacturing knowledge in design support systems; and proposes a suitable methodology based on the concept of ontological commitment and the PSL ontology (ISO/CD18629). The use of the verification procedures within an overall system development methodology is examined, and an understanding of how various categories of manufacturing knowledge (typical to design support systems) map onto the PSL ontology is developed. This work is also supported by case study material from industrial situations, including the casting and machining of metallic components. The PSL ontology was found to support the verification of most categories of manufacturing knowledge, and was shown to be particularly suited to process planning representations. Additional concepts and verification procedures were however needed to verify relationships between products and manufacturing processes. Suitable representational concepts and verification procedures were therefore developed, and integrated into the proposed knowledge verification methodology.