Modelling of industrial multi-physics processes—a key role for computational mechanics.

In the analysis of industrial processes, there is an increasing emphasis on systems governed by interacting continuum phenomena. Mathematical models of such multi-physics processes can only be achieved for practical simulations through computational solution procedures—computational mechanics. Examples of such multi-physics systems in the context of metals processing are used to explore some of the key issues. Finite-volume methods on unstructured meshes are proposed as a means to achieve efficient rapid solutions to such systems. Issues associated with the software design, the exploitation of high performance computers, and the concept of the virtual computational-mechanics modelling laboratory are also addressed in this context.

Bulk synchronous parallelization of industrial electromagentic software

The parallelization of existing/industrial electromagnetic software using the bulk synchronous parallel (BSP) computation model is presented. The software employs the finite element method with a preconditioned conjugate gradient-type solution for the resulting linear systems of equations. A geometric mesh-partitioning approach is applied within the BSP framework for the assembly and solution phases of the finite element computation. This is combined with a nongeometric, data-driven parallel quadrature procedure for the evaluation of right-hand-side terms in applications involving coil fields. A similar parallel decomposition is applied to the parallel calculation of electron beam trajectories required for the design of tube devices. The BSP parallelization approach adopted is fully portable, conceptually simple, and cost-effective, and it can be applied to a wide range of finite element applications not necessarily related to electromagnetics.

Numerical predictions of particle degradation in industrial-scale pneumatic conveyors

This paper presents an Eulerian-based numerical model of particle degradation in dilute-phase pneumatic conveying systems including bends of different angles. The model shows reasonable agreement with detailed measurements from a pilot-sized pneumatic conveying system and a much larger scale pneumatic conveyor. The potential of the model to predict degradation in a large-scale conveying system from an industrial plant is demonstrated. The importance of the effect of the bend angle on the damage imparted to the particles is discussed.

Heritage

This article examines the concepts, definitions, policies, and practices of heritage in a contemporary context. Within recent years, there have been significant shifts in our understandings and applications of heritage concepts and policies in the modern world. ‘Heritage’ emerged as a buzz word in international policy arenas in the 1980s and early 1990s, and has since weathered the vagaries of turbulent definitional and governance–nomenclature storms, as traditional debates about ‘what it is and what it is not’ reverberate around academia and state agencies alike. Policy and funding structures for heritage are determined by the classifications used to define them in various countries. Typically, reference is made to ‘built heritage’, ‘natural heritage’, and ‘intangible heritage’, loosely reflecting buildings, landscapes, and culture. Aspects of heritage are used by the cultural and tourism industries to add economic value, through heritage tourism sites, museums, and other activities. The cultural tourism product is often anchored around notions of heritage, and in postmodern, post-tourist societies, boundaries between culture, (travel) space, and identities are increasingly blurred. Issues of authenticity become important in the representation of heritage, and questions are asked about the validity of nostalgia versus realism. The role of heritage is examined in the context of identity formulation at individual and nation-state levels, and the political aspects of this are also discussed. Finally, heritage conservation is assessed through an examination of UNESCO’s World Heritage Site listing and protection strategy. In a changing world, new constructs of heritage, identity, authenticity, and representation will continue to emerge as meanings are constantly renegotiated over time and space.

Industrial water pollution in Dhaka, Bangladesh: strategies and incentives for pollution control in small and medium enterprises

The extent and gravity of the environmental degradation of the water resources in Dhaka due to untreated industrial waste is not fully recognised in international discourse. Pollution levels affect vast numbers, but the poor and the vulnerable are the worst affected. For example, rice productivity, the mainstay of poor farmers, in the Dhaka watershed has declined by 40% over a period of ten years. The study found significant correlations between water pollution and diseases such as jaundice, diarrhoea and skin problems. It was reported that the cost of treatment of one episode of skin disease could be as high as 29% of the weekly earnings of some of the poorest households. The dominant approach to deal with pollution in the SMEs is technocratic. Given the magnitude of the problem this paper argues that to control industrial pollution by SMEs and to enhance their compliance it is necessary to move from the technocratic approach to one which can also address the wider institutional and attitudinal issues. Underlying this shift is the need to adopt the appropriate methodology. The multi-stakeholder analysis enables an understanding of the actors, their influence, their capacity to participate in, or oppose change, and the existing and embedded incentive structures which allow them to pursue interests which are generally detrimental to environmental good. This enabled core and supporting strategies to be developed around three types of actors in industrial pollution, i.e., (i) principal actors, who directly contribute to industrial pollution; (ii) stakeholders who exacerbate the situation; and (iii) potential actors in mitigation. Within a carrot-and-stick framework, the strategies aim to improve environmental governance and transparency, set up a packet to incentive for industry and increase public awareness.

Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m3 and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.

Accelerated carbonation treatment of industrial wastes

The disposal of industrial waste presents major logistical, financial and environmental issues. Technologies that can reduce the hazardous properties of wastes are urgently required. In the present work, a number of industrial wastes arising from the cement, metallurgical, paper, waste disposal and energy industries were treated with accelerated carbonation. In this process carbonation was effected by exposing the waste to pure carbon dioxide gas. The paper and cement wastes chemically combined with up to 25% by weight of gas. The reactivity of the wastes to carbon dioxide was controlled by their constituent minerals, and not by their elemental composition, as previously postulated. Similarly, microstructural alteration upon carbonation was primarily influenced by mineralogy. Many of the thermal wastes tested were classified as hazardous, based upon regulated metal content and pH. Treatment by accelerated carbonation reduced the leaching of certain metals, aiding the disposal of many as stable non-reactive wastes. Significant volumes of carbon dioxide were sequestrated into the accelerated carbonated treated wastes.

Putting down routes: an examination of local government cultural policy shaping the development of heritage trails

This paper explores the significance of trails within local government cultural strategies by presenting the results of an audit of 1000 trails, content analysis of local cultural strategies and a series of interviews with local government cultural officers. It highlights the growing sophistication of trails as flexible and multi-faceted products promising an array of social, environmental, cultural and economic benefits. However, key issues emerge as challenges for local government cultural officers. These include the need for a realistic assessment of the relative importance of competing rationales, the design of methodologies to enable evidence-based policy making and more effective engagement with commercial organisations.

An industrial implementation of a methodology for the optimisation of product design tolerances

Today, the key to commercial success in manufacturing is the timely development of new products that are not only functionally fit for purpose but offer high performance and quality throughout their entire lifecycle. In principle, this demands the introduction of a fully developed and optimised product from the outset. To accomplish this, manufacturing companies must leverage existing knowledge in their current technical, manufacturing and service capabilities. This is especially true in the field of tolerance selection and application, the subject area of this research. Tolerance knowledge must be readily available and deployed as an integral part of the product development process. This paper describes a methodology and framework,currently under development in a UK manufacturer, to achieve this objective.

Fact, fiction and nostalgia: an assessment of heritage interpretation at living museums

This paper aims to explore and discuss the role of nostalgia (a concept that is inherently grounded within a psychological framework) in heritage interpretation from both provider and consumer perspectives. Whilst many cultural practitioners recognise the relationship between sentimentality and authenticity, particularly within a folk-heritage context, few have sought to examine the effect this has on the visitor experience. This paper questions visitors’ ability to objectively assess objects and experiences at heritage sites, and the role of practitioners in presenting often blurred views of social history that may sometimes negate historical fact. Drawing on case study research at two UK living museums, Blists Hill Victorian Town in Shropshire, England, and the Big Pit: National Coal Museum in Wales, notions of reminiscence, authenticity, myth and intangibility are considered within the framework of the interpretive experience. Findings suggest that the visitor experience is inherently subjective, highly individual and that the concept of intangibility is integral to an understanding of the nostalgia-authenticity debate.