The effect of curing on the performance of ACF bonded chip-on-flex assemblies after thermal ageing

Purpose – Anisotropic conductive film (ACF) is now an attractive technology for direct mounting of chips onto the substrate as an alternative to lead-free solders. However, despite its various advantages over other technologies, it also has many unresolved reliability issues. For instance, the performance of ACF assembly in high temperature applications is questionable. The purpose of this paper is to study the effect of bonding temperatures on the curing of ACFs, and their mechanical and electrical performance after high temperature ageing. Design/methodology/approach – In the work presented in this paper, the curing degree of an ACF at different bonding temperatures was measured using a differential scanning calorimeter. The adhesion strength and the contact resistance of ACF bonded chip-on-flex assembly were measured before and after thermal ageing and the results were correlated with the curing degree of ACF. The ACF was an epoxy-based adhesive in which Au-Ni coated polymer particles were randomly dispersed. Findings – The results showed that higher bonding temperatures had resulted in better ACF curing and stronger adhesion. After ageing, the adhesion strength increased for the samples bonded at lower temperatures and decreased for the samples bonded at higher temperatures. ACF assemblies with higher degrees of curing showed smaller increases in contact resistance after ageing. Conduction gaps at the bump-particle and/or particle-pad interfaces were found with the help of scanning electron microscopy and are thought to be the root cause of the increase in contact resistance. Originality/value – The present study focuses on the effect of bonding temperatures on the curing of ACFs, and their adhesion strength and electrical performances after high temperature ageing. The results of this study may help the development of ACFs with higher heat resistance, so that ACFs can be considered as an alternative to lead-free solders.

Penalties on car rental agreements

Examines the Cambridge County Court ruling in Volkswagen Financial Services (UK) Ltd v Ramage on whether a clause in a car hire contract which allowed the finance company, upon repudiation of the contract after the hirer fell into arrears, to claim compensation equivalent to the lost future rental payments was unenforceable as a penalty clause, rather than being a reasonable pre-estimate of actual loss. Refers to case law including the Court of Appeal ruling in Anglo Auto Finance Co v James in considering the differing losses which would occur during the course of the hire term according to the natural depreciation of the value of the car. Notes the reasoning of the Court on: (1) contracts of hire compared with hire purchase agreements; (2) the comparative position of the parties and the freedom to contract elsewhere; and (3) the reasonable prediction of future losses.