Intermetallic phase detection in lead-free solders using synchrotron X-ray diffraction

The high-intensity, high-resolution x-ray source at the European Synchrotron Radiation Facility (ESRF) has been used in x-ray diffraction (XRD) experiments to detect intermetallic compounds (IMCs) in lead-free solder bumps. The IMCs found in 95.5Sn3.8Ag0.7Cu solder bumps on Cu pads with electroplated-nickel immersion-gold (ENIG) surface finish are consistent with results based on traditional destructive methods. Moreover, after positive identification of the IMCs from the diffraction data, spatial distribution plots over the entire bump were obtained. These spatial distributions for selected intermetallic phases display the layer thickness and confirm the locations of the IMCs. For isothermally aged solder samples, results have shown that much thicker layers of IMCs have grown from the pad interface into the bulk of the solder. Additionally, the XRD technique has also been used in a temperature-resolved mode to observe the formation of IMCs, in situ, during the solidification of the solder joint. The results demonstrate that the XRD technique is very attractive as it allows for nondestructive investigations to be performed on expensive state-of-the-art electronic components, thereby allowing new, lead-free materials to be fully characterized.

Trembling the plane of immanence: media arts philosophy and the re-vision of art (or what’s acoustics got to do with the visual?)

Invited lecture at the Royal Academy of Art.

Leaving on a jet plane of immanence

This is about politics and protest, or rather about a politics of protest, and of rebellion. But it is also about creativity and the way in which theory and practice combine within the context of the ‘productive/creative’ process. In this case the combination is explicit and can be traced along a clear trajectory. The following will set out the way in which the accompanying piece of music – a cover of the 1969 protest song Leaving on a Jet Plane by Peter, Paul & Mary - came into being. In doing so it will make reference to a number of theoretical ideas/concepts that fed into the productive process and/or appeared relevant postproduction. It will draw on various aspects of thought from Heidegger (Standing reserve, Enframing and Authenticity), Camus (The Rebel), Foucault (Luminosity), and Deleuze (Immanence, Difference and Repetition and The Fold). [From the Author].

Application of regularization methods to damage detection in large scale plane frame structures using incomplete noisy modal data

This paper presents an approach for detecting local damage in large scale frame structures by utilizing regularization methods for ill-posed problems. A direct relationship between the change in stiffness caused by local damage and the measured modal data for the damaged structure is developed, based on the perturbation method for structural dynamic systems. Thus, the measured incomplete modal data can be directly adopted in damage identification without requiring model reduction techniques, and common regularization methods could be effectively employed to solve the developed equations. Damage indicators are appropriately chosen to reflect both the location and severity of local damage in individual components of frame structures such as in brace members and at beam-column joints. The Truncated Singular Value Decomposition solution incorporating the Generalized Cross Validation method is introduced to evaluate the damage indicators for the cases when realistic errors exist in modal data measurements. Results for a 16-story building model structure show that structural damage can be correctly identified at detailed level using only limited information on the measured noisy modal data for the damaged structure.