Modelling technology to predict flip-chip assembly

This paper describes modelling technology and its use in providing data governing the assembly of flip-chip components. Details are given on the reflow and curing stages as well as the prediction of solder joint shapes. The reflow process involves the attachment of a die to a board via solder joints. After a reflow process, underfill material is placed between the die and the substrate where it is heated and cured. Upon cooling the thermal mismatch between the die, underfill, solder bumps, and substrate will result in a nonuniform deformation profile across the assembly and hence stress. Shape predictions then thermal solidification and stress prediction are undertaken on solder joints during the reflow process. Both thermal and stress calculations are undertaken to predict phenomena occurring during the curing of the underfill material. These stresses may result in delamination between the underfill and its surrounding materials leading to a subsequent reduction in component performance and lifetime. Comparisons between simulations and experiments for die curvature will be given for the reflow and curing process

Popular lectures report

This is a report of two lectures held by the London Mathematical Society: a) What Computers Cannot Do by Dr Alan Slomson; b) The Mathematics of Shrek by Dr Joan Lazenby.

Cold crucible melting of reactive metals using combined DC and AC magnetic fields

Cold crucible furnace is widely used for melting reactive metals for high quality castings. Although the water cooled copper crucible avoids contamination, it produces a low superheat of the melt. Experimental and theoretical investigations of the process showed that the increase of the supplied power to the furnace leads to a saturation in the temperature rise of the melt, and no significant increase of the melt superheat can be obtained. The computer model of theprocess has been developed to simulate the time dependent turbulent flow, heat transfer with phase change, and AC and DC magnetohydrodynamics in a time varying liquid metal envelope. The model predicts that the supermimposition of a strong DC field on top of the normal AC field reduces the level of turbulience and stirring in the liquid metal, thereby reducing the heat loss through the base of the crucible and increasing the superheat. The direct measurements of the temperature in the commercial size cold crucbile has confirmed the computer redictions and showed that the addition of a DC field increased the superheat in molten TiAl from ~45C (AC field only) to ~81C (DC+AC fields). The present paper reports further predictions of the effect of a dDC field on top of the AC field and compares these with experimental data.

Economic restructuring in New Zealand: A classical account

New Zealand's recent experiment with radical neoliberalism is well rehearsed in international policy circles. Yet, given the economic restructuring premise for the reforms, there has been little assessment of their structural impact. In this paper I take up this challenge, utilising [Shaikh, A., Tonak, E. Measuring the wealth of nations: the political economy of national accounts. Cambridge: Cambridge University Press; 1994] methodology for deriving classical value categories from official national accounts data but extending this to the industry level. This approach allows changes to the production and appropriation of surplus value in different industries during the period to be identified, underpinning a Marxian interpretation of restructuring. Beyond the methodology, the research makes four contributions. First, conventional analysis is found limited by its concentration on changes to the distribution of value rather than its creation. Second, land rents are significant. Third, the role of financial capital is found more complex than traditionally argued. Finally, the approach provides a firm grounding for the unfashionable concept of class fraction.