14 resultados para box-ironbark forest
em Greenwich Academic Literature Archive - UK
Resumo:
Data from a hilly forest study site at Batang Ule, Sumatra, are organized into 30 100-m × 10-m subplots lying perpendicular to the line of maximal topographic gradient, from the valley to the plateau/ridge. The following methodological question is addressed: what species diversity measures are best used in order to reveal the ecologically distinct regions in the site. The main tool used to answer this question is the α-diversity curve (Hα). Graphical examination of tree and species densities, and α-diversity curves identifies an anomalous species diversity behaviour of the ‘ridge above the slope’ subplots which may have implications on land-facet class definitions. Factor analysis of the α-diversity curves indicates that the diversity space is two-dimensional: i.e. two diversity measures are sufficient to characterize the site; the species density (H0), and the Berger-Parker index (H[infty infinity]). In the two-dimensional diversity-space three distinct species diversity groups are found which relate to the topographic gradient at the Batang Ule site. The results are compared with those for a flat homogeneous site at Pasirmayang, Sumatra. The implications of the results on land-classifications in species-diversity mapping and conservation strategy are discussed.
Resumo:
Data from three forest sites in Sumatra (Batang Ule, Pasirmayang and Tebopandak) have been analysed and compared for the effects of sample area cut-off, and tree diameter cut-off. An 'extended inverted exponential model' is shown to be well suited to fitting tree-species-area curves. The model yields species carrying capacities of 680 for Batang Ule, 380 species for Pasirmayang, and 35 for Tebopandak (tree diameter >10cm). It would seem that in terms of species carrying capacity, Tebopandak and Pasirmayang are rather similar, and both less diverse than the hilly Batang Ule site. In terms of conservation policy, this would mean that rather more emphasis should be put on conserving hilly sites on a granite substratum. For Pasirmayang with tree diameter >3cm, the asymptotic species number estimate is 567, considerably higher than the estimate of 387 species for trees with diameter >10cm. It is clear that the diameter cut-off has a major impact on the estimate of the species carrying capacity. A conservative estimate of the total number of tree species in the Pasirmayang region is 632 species! In sampling exercises, the diameter cut-off should not be chosen lightly, and it may be worth adopting field sampling procedures which involve some subsampling of the primary sample area, where the diameter cut-off is set much lower than in the primary plots.
Resumo:
In attempts to conserve the species diversity of trees in tropical forests, monitoring of diversity in inventories is essential. For effective monitoring it is crucial to be able to make meaningful comparisons between different regions, or comparisons of the diversity of a region at different times. Many species diversity measures have been defined, including the well-known abundance and entropy measures. All such measures share a number of problems in their effective practical use. However, probably the most problematic is that they cannot be used to meaningfully assess changes, since thay are only concerned with the number of species or the proportions of the population/sample which they constitute. A natural (though simplistic) model of a species frequency distribution is the multinomial distribution. It is shown that the likelihood analysis of samples from such a distribution are closely related to a number of entropy-type measures of diversity. Hence a comparison of the species distribution on two plots, using the multinomial model and likelihood methods, leads to generalised cross-entropy as the LRT test statistic of the null that the species distributions are the same. Data from 30 contiguous plots in a forest in Sumatra are analysed using these methods. Significance tests between all pairs of plots yield extremely low p-values, indicating strongly that it ought to been "Obvious" that the observed species distributions are different on different plots. In terms of how different the plots are, and how these differences vary over the whole study site, a display of the degrees of freedom of the test, (equivalent to the number of shared species) seems to be the most revealing indicator, as well as the simplest.
Resumo:
The recent history and current trends in the collection and archiving of forest information and models is reviewed. The question is posed as to whether the community of forest modellers ought to take some action in setting up a Forest Model Archive (FMA) as a means of conserving and sharing the heritage of forest models that have been developed over several decades. The paper discusses the various alternatives of what an FMA could be, and should be. It then goes on to formulate a conceptual model as the basis for the construction of a FMA. Finally the question of software architecture is considered. Again there are a number of possible solutions. We discuss the alternatives, some in considerable detail, but leave the final decisions on these issues to the forest modelling community. This paper has spawned the “Greenwich Initiative” on the FMA. An internet discussion group on the topic will be started and launched by the “Trafalar Group”, which will span both IUFRO 4.1 and 4.11, and further discussion is planned to take place at the Forest Modelling Conference in Portugal, June 2002.
Resumo:
Forest fires can cause extensive damage to natural resources and properties. They can also destroy wildlife habitat, affect the forest ecosystem and threaten human lives. In this paper extreme wildland fires are analysed using a point process model for extremes. The model based on a generalised Pareto distribution is used to model data on acres of wildland burnt by extreme fire in the US since 1825. A semi-parametric smoothing approach is adapted with maximum likelihood method to estimate model parameters.
Resumo:
Spatio-temporal data on cytotaxonomic identifications of larvae of different members of the Simulium damnosum complex collected from rivers in southern Ghana and south-western Togo from 1975 until 1997 were analysed. When the data were combined, the percentages of savannah blackflies (S. damnosum sensu stricto and S. sirbanum) in the samples were shown to have been progressively increasing since 1975. The increases were statistically significant (P < 0·001), but the rates of increase were not linear. Further analyses were conducted according to the collection seasons and locations of the samples, to account for possible biases such as savannah flies occurring further south in the dry season or a preponderance of later samples from northern rivers having more savannah flies. These analyses showed that the increasing trend was statistically significant (P< 0·0001) only during the periods April to June and October to December. The presence of adult savannah flies carrying infective larvae (L3) indistinguishable from those of Onchocerca volvulus in the study zone was confirmed by examinations of captured flies. The percentages of savannah flies amongst the human-biting populations and the percentages with L3s in the head were higher during dry seasons than wet seasons and the savannah species were found furthest south (5 °25′N) in the dry season. Comparisons of satellite images taken in 1973 and 1990 over a study area in south-western Ghana encompassing stretches of the Tano and Bia rivers demonstrated that there have been substantial increases in urban and savannah areas, at the expense of forest. This was so not only for the whole images but also for subsamples of the images taken at 1, 2, 4, 8 and 16 km distant from sites alongside the River Tano. At every distance from the river, the percentages of pixels classified as urban or savannah have increased in 1990 compared with 1973, while those classified as degraded or dense forest have decreased. The possibility that the proportionate increases in savannah forms of the vectors of onchocerciasis, and hence in the likelihood of the transmission of savannah strains of the disease in formerly forested areas, were related to the decreases in forest cover is discussed.
Resumo:
The Symposium, “Towards the sustainable use of Europe’s forests”, with sub-title “Forest ecosystem and landscape research: scientific challenges and opportunities” lists three fundamental substantive areas of research that are involved: Forest management and practices, Ecosystem processes and functional ecology, and Environmental economics and sociology. This paper argues that there are essential catalytic elements missing! Without these elements there is great danger that the aimed-for world leadership in the forest sciences will not materialize. What are the missing elements? All the sciences, and in particular biology, environmental sciences, sociology, economics, and forestry have evolved so that they include good scientific methodology. Good methodology is imperative in both the design and analysis of research studies, the management of research data, and in the interpretation of research finding. The methodological disciplines of Statistics, Modelling and Informatics (“SMI”) are crucial elements in a proposed Centre of European Forest Science, and the full involvement of professionals in these methodological disciplines is needed if the research of the Centre is to be world-class. Distributed Virtual Institute (DVI) for Statistics, Modelling and Informatics in Forestry and the Environment (SMIFE) is a consortium with the aim of providing world-class methodological support and collaboration to European research in the areas of Forestry and the Environment. It is suggested that DVI: SMIFE should be a formal partner in the proposed Centre for European Forest Science.
Resumo:
The SB distributional model of Johnson's 1949 paper was introduced by a transformation to normality, that is, z ~ N(0, 1), consisting of a linear scaling to the range (0, 1), a logit transformation, and an affine transformation, z = γ + δu. The model, in its original parameterization, has often been used in forest diameter distribution modelling. In this paper, we define the SB distribution in terms of the inverse transformation from normality, including an initial linear scaling transformation, u = γ′ + δ′z (δ′ = 1/δ and γ′ = �γ/δ). The SB model in terms of the new parameterization is derived, and maximum likelihood estimation schema are presented for both model parameterizations. The statistical properties of the two alternative parameterizations are compared empirically on 20 data sets of diameter distributions of Changbai larch (Larix olgensis Henry). The new parameterization is shown to be statistically better than Johnson's original parameterization for the data sets considered here.
Resumo:
Forest fires can cause extensive damage to natural resources and properties. They can also destroy wildlife habitat, affect the forest ecosystem and threaten human lives. In this paper incidences of extreme wildland fires are modelled by a point process model which incorporates time-trend. A model based on a generalised Pareto distribution is used to model data on acres of wildland burnt by extreme fire in the US since 1825. A semi-parametric smoothing approach, which is very useful in exploratory analysis of changes in extremes, is illustrated with the maximum likelihood method to estimate model parameters.
Resumo:
An analysis of how the World Bank has maintained a position supportive of mutlinational strategies for privatisation of water. (Brief version).
Resumo:
An analysis of how the World Bank has maintained a position supportive of multinational strategies for privatisation of water.
Resumo:
This paper presents novel collaboration methods implemented using a centralized client/server product development integration architecture, and a decentralized peer-to-peer network for smaller and larger companies using open source solutions. The product development integration architecture has been developed for the integration of disparate technologies and software systems for the benefit of collaborative work teams in design and manufacturing. This will facilitate the communication of early design and product development within a distributed and collaborative environment. The novelty of this work is the introduction of an‘out-of-box’ concept which provides a standard framework and deploys this utilizing a proprietary state-of-the-art product lifecycle management system (PLM). The term ‘out-of-box’ means to modify the product development and business processes to suit the technologies rather than vice versa. The key business benefits of adopting such an approach are a rapidly reconfigurable network and minimal requirements for software customization to avoid systems instability