Mechanism of motion of an optical fiber aligned by a solder droplet

Solder is often used as an adhesive to attach optical fibers to a circuit board. In this proceeding we will discuss efforts to model the motion of an optical fiber during the wetting and solidification of the adhesive solder droplet. The extent of motion is determined by several competing forces, during three “stages” of solder joint formation. First, capillary forces of the liquid phase control the fiber position. Second, during solidification, the presence of the liquid-solid-vapor triple line as well as a reduced liquid solder volume leads to a change in the net capillary force on the optical fiber. Finally, the solidification front itself impinges on the fiber. Publicly-available finite element models are used to calculate the time-dependent position of the solidification front and shape of the free surface.

Macro-segregation of multi-component alloys in shape casting simulation

The objective of this work is to present a new scheme for temperature-solute coupling in a solidification model, where the temperature and concentration fields simultaneously satisfy the macro-scale transport equations and, in the mushy region, meet the constraints imposed by the thermodynamics and the local scale processes. A step-by-step explanation of the macrosegregation algorithm, implemented in the finite volume unstructured mesh multi-physics modelling code PHYSICA, is initially presented and then the proposed scheme is validated against experimental results obtained by Krane for binary and a ternary alloys.

Modelling the metal arc weldpool

Traditionally, before flip chips can be assembled the dies have to be attached with solder bumps. This process involves the deposition of metal layers on the Al pads on the dies and this is called the under bump metallurgy (UBM). In an alternative process, however, Copper (Cu) columns can be used to replace solder bumps and the UBM process may be omitted altogether. After the bumping process, the bumped dies can be assembled on to the printed circuit board (PCB) by using either solder or conductive adhesives. In this work, the reliability issues of flip chips with Cu column bumped dies have been studied. The flip chip lifetime associated with the solder fatigue failure has been modeled for a range of geometric parameters. The relative importance of these parameters is given and solder volume has been identified as the most important design parameter for long-term reliability. Another important problem that has been studied in this work is the dissolution of protection metals on the pad and Cu column in the reflow process. For small solder joints the amount of Cu which dissolves into the molten solder after the protection layers have worn out may significantly affect solder joint properties.

Policy packages as potential routes to urban road pricing in the UK

This paper focuses on urban road pricing as a demand management policy that is often regarded as radical and generally unacceptable. Road pricing often gets delayed or abandoned due to low acceptability. This may be due to the fact that complex interactions and drivers of change affect road transport management and require cooperation within implementation networks. The implementation network is a group of people (referred to as partners and actors) who co-ordinate the introduction of policy tools. The drivers of change include any internal or external influences that have an effect on the time, place, or ‘shape’ of the policy measures being introduced. Demand management measures that focus on 'sustainable transport' usually address a limited set of objectives and are often implemented alone i.e. are not necessarily combined with other policy measures. When combined with other measures, it is not always clear whether the multiple interactions between policy tools and implementation networks have been sufficiently considered. Examples of ongoing implementation of policy package in the UK are the support of road pricing initiatives combined with public transport improvements by the Transport Innovation Fund. The objectives of the paper are twofold. First, we present a review of the UK urban road pricing situation. Second, we contrast the emerging issues against six key implementation factors. The analysis of three existing UK road pricing examples - London, Edinburgh and Durham – shows the importance of combining policy tools. Furthermore, through the above examples and theoretical arguments, we emphasise the additional need of creating and maintaining strong networks when implementing policy packages.