Microwave curing for high density package

Summary form only given. Currently the vast majority of adhesive materials in electronic products are bonded using convection heating or infra-red as well as UV-curing. These thermal processing steps can take several hours to perform, slowing throughput and contributing a significant portion of the cost of manufacturing. With the demand for lighter, faster, and smaller electronic devices, there is a need for innovative material processing techniques and control methodologies. The increasing demand for smaller and cheaper devices pose engineering challenges in designing a curing systems that minimize the time required between the curing of devices in a production line, allowing access to the components during curing for alignment and testing. Microwave radiation exhibits several favorable characteristics and over the past few years has attracted increased academic and industrial attention as an alternative solution to curing of flip-chip underfills, bumps, glob top and potting cure, structural bonding, die attach, wafer processing, opto-electronics assembly as well as RF-ID tag bonding. Microwave energy fundamentally accelerates the cure kinetics of polymer adhesives. It provides a route to focus heat into the polymer materials penetrating the substrates that typically remain transparent. Therefore microwave energy can be used to minimise the temperature increase in the surrounding materials. The short path between the energy source and the cured material ensures a rapid heating rate and an overall low thermal budget. In this keynote talk, we will review the principles of microwave curing of materials for high density packing. Emphasis will be placed on recent advances within ongoing research in the UK on the realization of "open-oven" cavities, tailored to address existing challenges. Open-ovens do not require positioning of the device into the cavity through a movable door, hence being more suitable for fully automated processing. Further potential advantages of op- - en-oven curing include the possibility for simultaneous fine placement and curing of the device into a larger assembly. These capabilities promise productivity gains by combining assembly, placement and bonding into a single processing step. Moreover, the proposed design allows for selective heating within a large substrate, which can be useful particularly when the latter includes parts sensitive to increased temperatures.

A systematic methodology to assess the impact of human factors in ship design

Evaluating ship layout for human factors (HF) issues using simulation software such as maritimeEXODUS can be a long and complex process. The analysis requires the identification of relevant evaluation scenarios; encompassing evacuation and normal operations; the development of appropriate measures which can be used to gauge the performance of crew and vessel and finally; the interpretation of considerable simulation data. Currently, the only agreed guidelines for evaluating HFs performance of ship design relate to evacuation and so conclusions drawn concerning the overall suitability of a ship design by one naval architect can be quite different from those of another. The complexity of the task grows as the size and complexity of the vessel increases and as the number and type of evaluation scenarios considered increases. Equally, it can be extremely difficult for fleet operators to set HFs design objectives for new vessel concepts. The challenge for naval architects is to develop a procedure that allows both accurate and rapid assessment of HFs issues associated with vessel layout and crew operating procedures. In this paper we present a systematic and transparent methodology for assessing the HF performance of ship design which is both discriminating and diagnostic. The methodology is demonstrated using two variants of a hypothetical naval ship.

Flexible and robust run-time configuration for self-managing systems

This paper describes a methodology for deploying flexible dynamic configuration into embedded systems whilst preserving the reliability advantages of static systems. The methodology is based on the concept of decision points (DP) which are strategically placed to achieve fine-grained distribution of self-management logic to meet application-specific requirements. DP logic can be changed easily, and independently of the host component, enabling self-management behavior to be deferred beyond the point of system deployment. A transparent Dynamic Wrapper mechanism (DW) automatically detects and handles problems arising from the evaluation of self-management logic within each DP and ensures that the dynamic aspects of the system collapse down to statically defined default behavior to ensure safety and correctness despite failures. Dynamic context management contributes to flexibility, and removes the need for design-time binding of context providers and consumers, thus facilitating run-time composition and incremental component upgrade.

A reconfigurable component model using reflection

Providing a method of transparent communication and interoperation between distributed software is a requirement for many organisations and several standard and non-standard infrastructures exist for this purpose. Component models do more than just provide a plumbing mechanism for distributed applications, they provide a more controlled interoperation between components. There are very few component models however that have support for advanced dynamic reconfigurability. This paper describes a component model which provides controlled and constrained transparent communication and inter-operation between components in the form of a hierarchical component model. At the same time, the model contains support for advanced run-time reconfigurability of components. The process and benefits of designing a system using the presented model are discussed. A way in which reflective techniques and component frameworks can work together to produce dynamic adaptable systems is explained.

Assessing the suitability of ship design for human factors issues associated with evacuation and normal operations

Evaluating ship layout for human factors (HF) issues using simulation software such as maritimeEXODUS can be a long and complex process. The analysis requires the identification of relevant evaluation scenarios; encompassing evacuation and normal operations; the development of appropriate measures which can be used to gauge the performance of crew and vessel and finally; the interpretation of considerable simulation data. In this paper we present a systematic and transparent methodology for assessing the HF performance of ship design which is both discriminating and diagnostic. The methodology is demonstrated using two variants of a hypothetical naval ship.

Optimising vessel layout using human factors simulation

Evaluating ship layout for human factors (HF) issues using simulation software such as maritimeEXODUS can be a long and complex process. The analysis requires the identification of relevant evaluation scenarios; encompassing evacuation and normal operations; the development of appropriate measures which can be used to gauge the performance of crew and vessel and finally; the interpretation of considerable simulation data. In this paper we present a systematic and transparent methodology for assessing the HF performance of ship design which is both discriminating and diagnostic.

Increasing research evidence in practice: a possible role for the consultant nurse

Aims: To determine the extent to which clinical nursing practice has adopted research evidence. To identify barriers to the application of research findings in practice and to propose ways of overcoming these barriers. Background: Way back in 1976, nursing and midwifery practice started adopting research evidence. By 1990s, there was some transparency of research evidence in practice, but more could have been done to widen its adoption. Many barriers were identified which could hinder implementation of the evidence in practice, and the effort to remove these remains weak. Evaluation: 25 research articles from across Europe and America were selected, and scrutinized, and recommendations analysed. Findings: Many clinical practitioners report a lack of time, ability and motivation to appraise research reports and adopt findings in practice. The clinical environment was not seen as research friendly as there were a general lack of research activities and facilities locally. There was a clear lack of research leadership in practice. Implication for nursing management: This paper reviewed the research evidence from several published research papers and provides consultant nurses with practical suggestions on how to enhance research evidence application in their practice. It recommends how consultant nurses can make their practice more research transparent by providing the required leadership, creating a research-friendly organization, developing a clear research agenda and facilitating staff develop a local research framework for reading research and implementing research evidence in their practice.