Health status of an elderly population in Sharpeville, South Africa

The objective of this cross-sectional study was a comprehensive nutrition and health assessment to provide a basis for future intervention strategies for an elderly population attending a day-care centre. Socio-demographic, health and 24-hour recall dietary intake questionnaires were administered and anthropometric and biochemical measurements taken. The results indicate that the majority of respondents had an income of between R501 and R1 000 (South African rand) per month and most of them reported an occasional lack of funds to meet basic household needs, confirming the presence of food insecurity. Daily dietary intakes (mean [+ or -] Standard Deviation [SD]) of the women were 5 395 [+ or -] 2 946 kJ energy, 47 [+ or -] 27 g protein, 28 [+ or -] 21 g fat and 196 [+ or -] 123 g carbohydrates compared to 8 641 [+ or -] 3 799 kJ, 86 [+ or -] 48 g, 49 [+ or -] 32 g and 301 [+ or -] 139 g of the men, respectively. The majority (83.6%) of the women were overweight (body mass index [BMI] [greater than or equal to] 25) or obese (BMI [greater than or equal to] 30) whilst 78% had a mid-upper arm circumference (MUAC) of [greater than or equal to] 21.7 cm. Mean intakes of micronutrients were low in comparison to reference standards and serum zinc levels were suboptimal. Obesity, hypertension and raised total serum cholesterol levels indicated an increased risk for coronary heart disease. It can be concluded that a low income, household food insecurity and risk factors associated with malnutrition and non-communicable diseases were prevalent in this elderly population. OPSOMMING Die doelwit van hierdie dwarssnitstudie was ‘n omvattende bepaling van voeding- en gesondheidstatus om as basis te dien vir toekomstige intervensiestrategieë vir ’n groep bejaardes wat ’n dagsentrum besoek. Sosiodemografiese, gesondheid- en 24-uur herroep-dieetinname vraelyste is voltooi en antropometriese en biochemiese metings is geneem. Die resultate het bevestig dat die meerderheid respondente ‘n maandelikse inkomste van tussen R501 en R1 000 (Suid-Afrikaanse rand) gehad het. Die meeste het ‘n geldtekort vir basiese huishoudelike behoeftes gerapporteer wat dui op huishoudelike voedselinsekuriteit. Daaglikse dieetinnames (gemiddeld±standaardafwyking [SA]) van die vroue was onderskeidelik 5 395±2 946 kJ energie, 47±27 g proteïen, 28±21 g vet en 196±123 g koolhidrate in vergelyking met 8 641±3 799 kJ, 86±48 g, 49±32 g en 301±139 g vir die mans. Die meerderheid (83.6%) van die vroue was oorgewig (liggaamsmassa-indeks [LMI] >25) of vetsugtig (LMI > 30) en 78% het ’n middel-bo-armomtrek (MUAC) van > 21.7 cm gehad. Gemiddelde mikronutriëntinnames was laag in vergelyking met die verwysingstandaarde en serumsink was suboptimaal. Vetsug, hipertensie en verhoogde totale serumcholesterolvlakke het op ‘n verhoogde risiko van kardiovaskulêre siekte gedui. Die resultate het dus bewys dat lae inkomste, huishoudelike voedselinsekuriteit en die risikofaktore wat met wanvoeding en leefstylsiektes geassosieer word, teenwoordig was.

Zinc polycarboxylate dental cement for the controlled release of an active organic substance: proof of concept

The potential of employing zinc polycarboxylate dental cement as a controlled release material has been studied. Benzalkonium chloride was used as the active ingredient, and incorporated at concentrations of 1, 2 and 3% by mass within the cement. At these levels, there was no observable effect on the speed of setting. Release was followed using an ion-selective electrode to determine changes in chloride ion concentration with time. This technique showed that the additive was released when the cured cement was placed in water, with release occurring by a diffusion mechanism for the first 3 h, but continuing beyond that for up to 1 week. Diffusion coefficients were in the range 5.62 × 10(−6) cm(2) s(−1) (for 1% concentration) to 10.90 × 10(−6) cm(2) s(−1) (for 3% concentration). Up to 3% of the total loading of benzalkonium chloride was released from the zinc polycarboxylate after a week, which is similar to that found in previous studies with glass-ionomer cement. It is concluded that zinc polycarboxylate cement is capable of acting as a useful material for the controlled release of active organic compounds.

The kinetics of water loss from zinc phosphate and zinc polycarboxylate dental cements

The water desorption behaviour of three different zinc oxide dental cements (two polycarboxylates, one phosphate) has been studied in detail. Disc-shaped specimens of each material were prepared and allowed to lose water by being subjected to a low humidity desiccating atmosphere over concentrated sulfuric acid. In all three cements, water loss was found to follow Fick's second law for at least 6 h (until M(t)/M(infinity) values were around 0.5), with diffusion coefficients ranging from 6.03 x 10(-8 )cm(2 )s(-1) (for the zinc phosphate) to 2.056 x 10(-7 )cm(2 )s(-1) (for one of the zinc polycarboxylates, Poly F Plus). Equilibration times for desorption were of the order of 8 weeks, and equilibrium water losses ranged from 7.1% for zinc phosphate to 16.9% and 17.4% for the two zinc polycarboxylates.

In vitro release of bovine serum albumin from alginate/HPMC hydrogel beads

In recent years, the use of swelling polymeric matrices for the encapsulation and controlled release of protein drugs has received significant attention. The purpose of the present study was to investigate the release of albumin, a model protein from alginate/hydroxypropyl-methylcellulose (HPMC) gel beads. A hydrogel system comprised of two natural, hydrophilic polymers; sodium alginate and HPMC was studied as a carrier of bovine serum albumin (BSA) which was used as a model protein. The morphology, bead size and the swelling ratio were studied in different physical states; fully swollen, dried and reswollen using scanning electron microscopy and image analysis. Finally the effect of different alginate/HPMC ratios on the BSA release profile in physiological saline solution was investigated. Swelling experiments revealed that the bead diameter increases with the viscosity of the alginate solution while the addition of HPMC resulted in a significant increase of the swelling ratio. The BSA release patterns showed that the addition of HPMC increased the protein-release rate while the release mechanism fitted the Peppas model. Alginate/HPMC beads prepared using the ionic gelation exhibited high BSA loading efficiency for all formulations. The presence of HPMC increased the swelling ability of the alginate beads while the particle size remained unaffected. Incorporation of HPMC in the alginate gels also resulted in improved BSA release in physiological saline solution. All formulations presented a non-Fickian release mechanism described by the Peppas model. In addition, the implementation of non-parametric tests showed significant differences in the release patterns between the alginate/HPMC and the pure alginate beads, respectively.

The interaction of zinc oxide-based dental cements with aqueous solutions of potassium fluoride

The ability of zinc oxide-based dental cements (zinc phosphate and zinc polycarboxylate) to take up fluoride from aqueous solution has been studied. Only zinc phosphate cement was found to take up any measurable fluoride after 5 h exposure to the solutions. The zinc oxide filler of the zinc phosphate also failed to take up fluoride from solution. The key interaction for this uptake was thus shown to involve the phosphate groups of the set cement. However, whether this took the form of phosphate/fluoride exchange, or the formation of oxyfluoro-phosphate groups was not clear. Fluoride uptake followed radicaltime kinetics for about 2 h in some cases, but was generally better modelled by the Elovich equation, dq(t)/dt = alpha exp(-beta q(t)). Values for alpha varied from 3.80 to 2.48 x 10(4), and for beta from 7.19 x 10(-3) to 0.1946, though only beta showed any sort of trend, becoming smaller with increasing fluoride concentration. Fluoride was released from the zinc phosphate cements in processes that were diffusion based up to M(t)/M(infinity) of about 0.4. No further release occurred when specimens were placed in fresh volumes of deionised water. Only a fraction of the fluoride taken up was re-released, demonstrating that most of the fluoride taken up becomes irreversibly bound within the cement.

Water transport in zinc oxy-chloride cements

The water uptake and water loss behaviour in three different formulations of zinc oxy-chloride cement have been studied in detail. Specimens of each material were subjected to a high humidity atmosphere (93% RH) over saturated aqueous sodium sulfate, and a low humidity desiccating atmosphere over concentrated sulfuric acid. In high humidity, the cement formulated from the nominal 75% ZnCl2 solutions gained mass, eventually becoming too sticky to weigh further. The specimens at 25% and 50% ZnCl2 by contrast lost mass by a diffusion process, though by 1 week the 50% cement had stated to gain mass and was also too sticky to weigh. In low humidity, all three cements lost mass, again by a diffusion process. Both water gain and water loss followed Fick's law for a considerable time. In the case of water loss under desiccating conditions, this corresponded to values of Mt/MĄ well above 0.5. However, plots did not go through the origin, showing that there was an induction period before true diffusion began. Diffusion coefficients varied from 1.56 x 10-5 (75% ZnCl2) to 2.75 x 10-5 cm2/s (50% ZnCl2), and appeared to be influenced not simply by composition. The drying of the 25% and 50% ZnCl2 cements in high humidity conditions occurred at a much lower rate, with a value of D of 2.5 x 10-8 cm2/s for the 25% ZnCl2 cement. This cement was found to equilibrate slowly, but total water loss did not differ significantly from that of the cements stored under desiccating conditions. Equilibration times for water loss in desiccating conditions were of the order of 2-4 hours, depending on ZnCl2 content; equilibrium water losses were respectively 28.8 [25% ZnCl2], 16.2 [50%] and 12.4 [75%] which followed the order of ZnCl2 content. It is concluded that the water transport processes are strongly influenced by the ZnCl2 content of the cement.

Breast milk levels of zinc and omega-6 polyunsaturated fatty acids and growth of healthy Chinese infants

AIM: To examine the concentrations of zinc and omega-6 polyunsaturated fatty acids (omega-6 PUFAs) in breast milk, the impact of zinc on omega-6 PUFA metabolism, and the growth rate of infants. METHODS: Forty-one mother-term infant pairs from a rural area of northern Beijing, China, who were 1 month (n = 18, group I) and 3 months (n = 23, group II) old and exclusively breastfed, were studied. The dietary records and the concentrations of zinc and omega-6 PUFAs in the milk of lactating women and the increase in weight and length of their infants during 1 and 3 postnatal months were analysed. RESULTS: The dietary intakes of mothers in the two groups were the same, i.e. high in carbohydrate and low in fat, protein and energy. The maternal zinc intake was 7.5mg/d and thus reached only 34.6% of the current Recommended Nutrient Intake (RNI). The levels of zinc and arachidonic acid (AA, C20:4 omega-6) in the milk of group I were significantly higher than those in group II. Furthermore, significant positive correlations were found between the concentrations of zinc and AA in the breast milk and between the level of milk AA and weight gain. CONCLUSION: Zinc may be a co-factor and essential for essential fatty acids (EFA) metabolism. Thus suboptimal zinc intake may cause EFA imbalance. Further studies of Chinese rural mother-infant pairs are necessary to determine whether zinc supplementation should be recommended when lactation exceeds 3 months.