Dizzy heights and occupiers' liability

Reviews case law on the occupier's duty of care to trespassers under the Occupiers' Liability Act 1984 s.1, including the issues that apply where the trespasser engaged in risky behaviour, was a child, and where the property was inherently dangerous.

A verification system for cinematographer image generation tools

The Production Workstation developed at the University of Greenwich is evaluated as a tool for assisting all those concerned with production. It enables the producer, director, and cinematographer to explore the quality of the images obtainable when using a plethora of tools. Users are free to explore many possible choices, ranging from 35mm to DV, and combine them with the many image manipulation tools of the cinematographer. The validation required for the system is explicitly examined, concerning the accuracy of the resulting imagery. Copyright © 1999 by the Society of Motion Picture and Television Engineers, Inc.

Exploiting virtual prototyping for reliability assessment

Products manufactured by the electronics sector are having a major impact in telecommunications, transportation space applications, biomedical applications, consumer products, intelligent hand held devices, and of course,the computer. Demands from end-users in terms of greater product functionality, adoption of environmentally friendly materials, and further miniaturization continually pose several challenges to electronics companies. In the context of electronic product design and manufacture, virtual prototying software tools are allowing companies to dramatically reduce the number of phsysical prototypes and design iterations required in product development and hence reduce costs and time to market. This paper details of the trends in these technolgies and provides an example of their use for flip-chip assembly technology.

Creating a suitable and successful solution for the integration of podcasting and vidcasting in a higher education e-learning environment

A small research project is currently taking place within a department of the University of Greenwich. The project involves using current technology (Apple’s xServe, iPhones, iPod touch, Podcast Producer application and some 3rd party capture software) with the intention to provide a solution for quick and simple podcasting. This paper also aims to investigate the use of podcasting to help promote and extend the e-learning provision within the school. In short this project aims to justify the use of podcasting as a teaching and learning tool to help enhance student learning while identifying the most appropriate manner to integrate podcasting within an e-learning environment.

More than a nuisance: personal injury under Rylands

Discusses, by reference to case law, whether damages for personal injury are recoverable under Rylands v Fletcher liability. Considers the issue by reference to a hypothetical scenario in which a claimant suffers personal injury as a result of a chemical leak from a factory for which the factory owner is not at fault. Considers claims based on diminution in amenity and for consequential loss.

Duty of care and slippery floors

Reflects on the scope of a shop owner's duty of care under the Occupiers' Liability Act 1957 to keep floors clear of spillages. Reviews the principles formulated by the Court of Appeal in Ward v Tesco Stores Ltd, including the evidential burden to show the discharge of the duty, and the approach adopted in subsequent cases. Discusses the High Court ruling in Piccolo v Larkstock Ltd (t/a Chiltern Flowers) on whether a small florist on Marylebone Station concourse was obliged to keep the floor dry and petal-free at all times and notes the importance of a proper system to safeguard customers.

Joint ownership and beneficial entitlement: Stack v Dowden.

Explores the issue of the share of beneficial entitlement to the family home where the legal title is jointly owned, but where there has not been an express declaration of a beneficial joint tenancy. Discusses the House of Lords judgment in Stack v Dowden which addressed this point. Explains how the judges moved the focus away from the court imposing its own sense of fairness on the parties or imputing an intention based on the circumstances to one where the concentration will be on the parties' relevant conduct. Outlines three other points of interest referred to in the judgment: (1) whether an indirect financial contribution could support a constructive trust; (2) whether proprietary estoppel and common intention constructive trusts should be assimilated; and (3) whether a mortgage liability is equivalent to a financial contribution.

The legal pendulum swings back

Comments on the Court of Appeal judgment in Abou-Rahmah v Abacha on liability for dishonest assistance to a breach of trust. Discusses whether an objective standard should apply to determine whether the accessory acted dishonestly. Reviews case law, examining whether the combined test proposed in the House of Lords judgment in Twinsectra Ltd v Yardley is still good law.

Microwave curing of thermosetting polymer materials in microelectronics applications

Thermosetting polymer materials are widely utilised in modern microelectronics packaging technology. These materials are used for a number of functions, such as for device bonding, for structural support applications and for physical protection of semiconductor dies. Typically, convection heating systems are used to raise the temperature of the materials to expedite the polymerisation process. The convection cure process has a number of drawbacks including process durations generally in excess of 1 hour and the requirement to heat the entire printed circuit board assembly, inducing thermomechanical stresses which effect device reliability. Microwave energy is able to raise the temperature of materials in a rapid, controlled manner. As the microwave energy penetrates into the polymer materials, the heating can be considered volumetric – i.e. the rate of heating is approximately constant throughout the material. This enables a maximal heating rate far greater than is available with convection oven systems which only raise the surface temperature of the polymer material and rely on thermal conductivity to transfer heat energy into the bulk. The high heating rate, combined with the ability to vary the operating power of the microwave system, enables the extremely rapid cure processes. Microwave curing of a commercially available encapsulation material has been studied experimentally and through use of numerical modelling techniques. The material assessed is Henkel EO-1080, a single component thermosetting epoxy. The producer has suggested three typical convection oven cure options for EO1080: 20 min at 150C or 90 min at 140C or 120 min at 110C. Rapid curing of materials of this type using advanced microwave systems, such as the FAMOBS system [1], is of great interest to microelectronics system manufacturers as it has the potential to reduce manufacturing costs, increase device reliability and enables new device designs. Experimental analysis has demonstrated that, in a realistic chip-on-board encapsulation scenario, the polymer material can be fully cured in approximately one minute. This corresponds to a reduction in cure time of approximately 95 percent relative to the convection oven process. Numerical assessment of the process [2] also suggests that cure times of approximately 70 seconds are feasible whilst indicating that the decrease in process duration comes at the expense of variation in degree of cure within the polymer.

A connection too far

Examines the test for vicarious liability for intentional torts laid down by the House of Lords in Lister v Hesley Hall Ltd requiring a close connection between an employee's tort and his employment. Reviews subsequent case law, highlighting inconsistencies in the courts' approach as to whether a close connection existed. Asks whether the cases suggest that the courts are applying a separate test based on the fairness of holding the employer liable. [From Legal Journals Index]

Can the use of supplementary video and audio materials support student understanding of 3D animation? Some results, analysis and conclusions

A project within a computing department at the University of Greenwich, has been carried out to identify whether podcasting can be used to help understanding and learning of a subject (3D Animation). We know that the benefits of podcasting in education (HE) can be justified, [1]; [2]; [3]; [4]; [5]; [6] and that some success has been proven, but this paper aims to report the results of a term-long project that provided podcast materials for students to help support their learning using Xserve and Podcast Producer technology. Findings in a previous study [6] identified podcasting as a way to diversify learning and provde a more personalised learning experience for students, as well as being able to provide access to a greater mix of learning styles [7]. Finally this paper aims to present the method of capture and distribution, the methodologies of the study, analysis of results, and conclusions that relate to podcasting and enhanced supported learning.