Temporal management using relative time in knowledge-based process control

In this paper, a knowledge-based approach is proposed for the management of temporal information in process control. A common-sense theory of temporal constraints over processes/events, allowing relative temporal knowledge, is employed here as the temporal basis for the system. This theory supports duration reasoning and consistency checking, and accepts relative temporal knowledge which is in a form normally used by human operators. An architecture for process control is proposed which centres on an historical database consisting of events and processes, together with the qualitative temporal relationships between their occurrences. The dynamics of the system is expressed by means of three types of rule: database updating rules, process control rules, and data deletion rules. An example is provided in the form of a life scheduler, to illustrate the database and the rule sets. The example demonstrates the transitions of the database over time, and identifies the procedure in terms of a state transition model for the application. The dividing instant problem for logical inference is discussed with reference to this process control example, and it is shown how the temporal theory employed can be used to deal with the problem.

Experimental and numerical study of the cold crucible melting process

The cold crucible, or induction skull melting process as is otherwise known, has the potential to produce high purity melts of a range of difficult to melt materials, including Ti–Al and Ti6Al4V alloys for Aerospace, Ti–Ta and other biocompatible materials for surgical implants, silicon for photovoltaic and electronic applications, etc. A water cooled AC coil surrounds the crucible causing induction currents to melt the alloy and partially suspend it against gravity away from water-cooled surfaces. Strong stirring takes place in the melt due to the induced electromagnetic Lorentz forces and very high temperatures are attainable under the right conditions (i.e., provided contact with water cooled walls is minimised). In a joint numerical and experimental research programme, various aspects of the design and operation of this process are investigated to increase our understanding of the physical mechanisms involved and to maximise process efficiency. A combination of FV and Spectral CFD techniques are used at Greenwich to tackle this problem numerically, with the experimental work taking place at Birmingham University. Results of this study, presented here, highlight the influence of turbulence and free surface behaviour on attained superheat and also discuss coil design variations and dual frequency options that may lead to winning crucible designs.

Dynamic analysis of Flip-Chip Self-Alignment

Self-alignment of soldered electronic components such as flip-chips (FC), ball grid arrays (BGA) and optoelectronic devices during solder reflow is important as it ensures good alignment between components and substrates. Two uncoupled analytical models are presented which provide estimates of the dynamic time scales of both the chip and the solder in the self-alignment process. These predicted time scales can be used to decide whether a coupled dynamic analysis is required for the analysis of the chip motion. In this paper, we will show that for flip-chips, the alignment dynamics can be described accurately only when the chip motion is coupled with the solder motion because the two have similar time-scale values. To study this coupled phenomenon, a dynamic modeling method has been developed. The modeling results show that the uncoupled and coupled calculations result in significantly different predictions. The calculations based on the coupled model predict much faster rates of alignment than those predicted using the uncoupled approach.

Experimental and numerical study of the cold crucible melting process

The cold crucible, or induction skull melting process as is otherwise known, has the potential to produce high purity melts of a range of difficult to melt materials, including Ti–Al and Ti6Al4V alloys for Aerospace, Ti–Ta and other biocompatible materials for surgical implants, silicon for photovoltaic and electronic applications, etc. A water cooled AC coil surrounds the crucible causing induction currents to melt the alloy and partially suspend it against gravity away from water-cooled surfaces. Strong stirring takes place in the melt due to the induced electromagnetic Lorentz forces and very high temperatures are attainable under the right conditions (i.e., provided contact with water cooled walls is minimised). In a joint numerical and experimental research programme, various aspects of the design and operation of this process are investigated to increase our understanding of the physical mechanisms involved and to maximise process efficiency. A combination of FV and Spectral CFD techniques are used at Greenwich to tackle this problem numerically, with the experimental work taking place at Birmingham University. Results of this study, presented here, highlight the influence of turbulence and free surface behaviour on attained superheat and also discuss coil design variations and dual frequency options that may lead to winning crucible designs.

Cold crucible melting of reactive metals using combined DC and AC magnetic fields

Cold crucible furnace is widely used for melting reactive metals for high quality castings. Although the water cooled copper crucible avoids contamination, it produces a low superheat of the melt. Experimental and theoretical investigations of the process showed that the increase of the supplied power to the furnace leads to a saturation in the temperature rise of the melt, and no significant increase of the melt superheat can be obtained. The computer model of theprocess has been developed to simulate the time dependent turbulent flow, heat transfer with phase change, and AC and DC magnetohydrodynamics in a time varying liquid metal envelope. The model predicts that the supermimposition of a strong DC field on top of the normal AC field reduces the level of turbulience and stirring in the liquid metal, thereby reducing the heat loss through the base of the crucible and increasing the superheat. The direct measurements of the temperature in the commercial size cold crucbile has confirmed the computer redictions and showed that the addition of a DC field increased the superheat in molten TiAl from ~45C (AC field only) to ~81C (DC+AC fields). The present paper reports further predictions of the effect of a dDC field on top of the AC field and compares these with experimental data.

Options to renew leases: time for legislative relief?

Argues that England should follow the example of Australia and New Zealand and give the courts statutory power to grant a tenant relief against forfeiture of the right to exercise an option to renew a lease by reason of the tenant being in breach of covenant. Suggests the legislative provision introducing this power should adopt wording mirroring that in the Law of Property Act 1925 s.146(2).

Creative leadership & communities of practice

This Second Wave presentation focused on 'Creative Leadership and Communities of Practice', with particular reference to issues of trust affecting young people, unemployment and wider uncertainties in an economic recession when people were facing job cuts and in a social environment characterised by cynicism and a downturn in trust. Young people who join Second Wave are brought into a community of practice (CoP) (Lave and Wenger, 1991; Wenger, 1999) involving a dynamic, fluid process which is distinctive in its transformative power to change people's lives. The philosophy behind this involves Dewey's notion of the 'active self' (Dewey, 1916) and the theories of 'social constructivism' (Vygotsky, 1978). The process fosters trust, confidence and social learning (Bandura, 1977; Vygotsky, 1978) in which young people join in with a dialogue involving participation in the youth-centred creative space. The 'border zone' (Heath, 1994) in that creative space enables young people to connect with each other in the specialist field of youth arts. The youth-centred partnerships involved lead to greater confidence and development in a range of important artistic, social, cognitive and emotional skills and opportunities. Ultimately, the young person may become engaged in multi-agency working with Second Wave's external partners. Throughout all of these processes, young people are encouraged progressively to develop a more 'active self' to engage proactively with many different beneficial opportunities relating to the performing arts. In an era in which there has been a loss of trust in public life this is particularly important. If trust is defined in part as a belief in the honesty, competence and benevolence of others, it tends to act like 'social glue', cushioning difficult situations and enabling actions to take place easily that otherwise would not be permissible. The Edelman Trust Barometer for 2009 has recorded a marked diminution of trust in corporations, businesses and government, as a result of the credit crunch. While the US and parts of Europe were showing recovery from a generalised loss of trust by mid-year 2009, the UK had not. Social attitudes in Britain may be hardening - from being a nation of sceptics we may be becoming a nation of cynics: for example, only 13% of the population surveyed by Edelman trust politicians to tell the truth. In this situation, there is a need to promote positive measures to build trust. The presentation aims described key aspects of Second Wave's approach to identify and disseminate its model of good practice to make this more explicit and accessible to others. It is with awareness of the profoundly challenging circumstances facing young people, particularly but not exclusively in inner city urban areas such as Deptford, and the valuable contribution youth arts work can make to their well-being and development, that the presentation was carried out. In an era of generalised mistrust, the work done at Second Wave is crucial in empowering and supporting young people to find a positive and creative direction as part of the community.

Segregation of bulk particulates through multiple process handling steps

Segregation or de-blending of bulk particulates is a problem that is encountered in many industrial sectors. The magnitude of segregation can often determine whether a complete production batch can be transferred for onward processing within the plant or released to market. It is a phenomenon that impacts directly upon the profitability of a process. Segregation can occur through a coincidence of a range of variables that relate to the process and bulk particulate properties, common mechanisms for this include; percolation, surface effect (rolling) and elutriation. The importance to industry of predicting the sensitivity of bulk particulates to segregation cannot be under-estimated, and to this end various test procedures have been developed. Within many industries striving to improve product quality and reduce wastage, the determination of variability in blend consistency caused by segregation is an increasing priority. This paper considers recent work undertaken to evaluate the effects of multiple handling operations on the degree of segregation that results. The bulk properties of segregability (and resulting flowability) can not only influence the product consistency, but can have great influence over the process (production) control and performance.

"I’ll call you when we are ready" (One family’s experience of critical care and end of life decision making)

The purpose of this paper is to explore through narrative accounts one family's expérience of critical care, after the admission of a family member to an Intensive Care Unit (ICU) and their subséquent death five weeks later. Numerous studies support the need for effective communication and clear information to be given to the family. In this instance it was évident from their stories that there were numerous barriers to communication, including language and a lack of insight into the needs of the family. Many families do not understand the complexities of nursing care in an ICU so lack of communication by nursing staff was identified as uncaring behavior and encounters. Facilitating a family's proximity to a dying patient and encouraging them to participate in care helps to maintain some sensé of personal control. Despite a commitment to involving family members in care, which was enshrined in the Unit Philosophy, relatives were banished to the waiting room for hours. They experienced feelings of powerlessness and helplessness as they waited with other relatives for news following investigations or until 'the doctor had completed his rounds'. Explanations of "we must make 'the patient' comfortable" was no consolation for those who wished to be involved in care. The words "I'il call you when we are ready" became a mantra to the forgotten families who waited patiently for those with power to admit them to the ICU. Implications are this family felt they were left alone to cope with the traumatic expériences leading up to and surrounding the death. They felt mainly supported by the priest, who not only administered the last rites but provided spiritual support to the family and dealt sensitively with many issues. Paternalism in décision making when there is a moral obligation to ensure that discussions on end of life dilemmas are an inclusive process with families, doctors, nurses was not understood, therefore it caused conflict within the family over EOL décision making. The family felt that the opportunity to share expériences through telling and retelling their stories would enable them to reconfigure the past and create purpose in the future.