[Organiser of Stirling's Red Buildings Conference for the Twentieth Century Society]

The aim of the conference is to review the three 'Red Buildings' with experts who have studied their history and their performance, and to discuss their future. Work is due to take place on the Leicester and Oxford buildings in the relatively near future, and technical knowledge can be shared in a context of understanding the design intention. Also to celebrate Stirling and Gowan's careers from a broader perspective and to assert the value of looking after these special buildings as assets for the future. The speakers in the afternoon session are people who knew the two architects well, and in some cases worked for them. [From University of Leicester]

Parallel mesh partitioning on distributed memory systems

The problem of deriving parallel mesh partitioning algorithms for mapping unstructured meshes to parallel computers is discussed in this chapter. In itself this raises a paradox - we seek to find a high quality partition of the mesh, but to compute it in parallel we require a partition of the mesh. In fact, we overcome this difficulty by deriving an optimisation strategy which can find a high quality partition even if the quality of the initial partition is very poor and then use a crude distribution scheme for the initial partition. The basis of this strategy is to use a multilevel approach combined with local refinement algorithms. Three such refinement algorithms are outlined and some example results presented which show that they can produce very high global quality partitions, very rapidly. The results are also compared with a similar multilevel serial partitioner and shown to be almost identical in quality. Finally we consider the impact of the initial partition on the results and demonstrate that the final partition quality is, modulo a certain amount of noise, independent of the initial partition.

Dynamic mesh partitioning and load-balancing for parallel computational mechanics codes

In this Chapter we discuss the load-balancing issues arising in parallel mesh based computational mechanics codes for which the processor loading changes during the run. We briefly touch on geometric repartitioning ideas and then focus on different ways of using a graph both to solve the load-balancing problem and the optimisation problem, both locally and globally. We also briefly discuss whether repartitioning is always valid. Sample illustrative results are presented and we conclude that repartitioning is an attractive option if the load changes are not too dramatic and that there is a certain trade-off between partition quality and volume of data that the underlying application needs to migrate.

Identifying the damage mechanisms in paper using the acoustic emission monitoring technique

This paper investigates the use of the acoustic emission (AE) monitoring technique for use in identifying the damage mechanisms present in paper associated with its production process. The microscopic structure of paper consists of a random mesh of paper fibres connected by hydrogen bonds. This implies the existence of two damage mechanisms, the failure of a fibre-fibre bond and the failure of a fibre. This paper describes a hybrid mathematical model which couples the mechanics of the mass-spring model to the acoustic wave propagation model for use in generating the acoustic signal emitted by complex structures of paper fibres under strain. The derivation of the mass-spring model can be found in [1,2], with details of the acoustic wave equation found in [3,4]. The numerical implementation of the vibro-acoustic model is discussed in detail with particular emphasis on the damping present in the numerical model. The hybrid model uses an implicit solver which intrinsically introduces artificial damping to the solution. The artificial damping is shown to affect the frequency response of the mass-spring model, therefore certain restrictions on the simulation time step must be enforced so that the model produces physically accurate results. The hybrid mathematical model is used to simulate small fibre networks to provide information on the acoustic response of each damage mechanism. The simulated AEs are then analysed using a continuous wavelet transform (CWT), described in [5], which provides a two dimensional time-frequency representation of the signal. The AEs from the two damage mechanisms show different characteristics in the CWT so that it is possible to define a fibre-fibre bond failure by the criteria listed below. The dominant frequency components of the AE must be at approximately 250 kHz or 750 kHz. The strongest frequency component may be at either approximately 250 kHz or 750 kHz. The duration of the frequency component at approximately 250 kHz is longer than that of the frequency component at approximately 750 kHz. Similarly, the criteria for identifying a fibre failure are given below. The dominant frequency component of the AE must be greater than 800 kHz. The duration of the dominant frequency component must be less than 5.00E-06 seconds. The dominant frequency component must be present at the front of the AE. Essentially, the failure of a fibre-fibre bond produces a low frequency wave and the failure of a fibre produces a high frequency pulse. Using this theoretical criteria, it is now possible to train an intelligent classifier such as the Self-Organising Map (SOM) [6] using the experimental data. First certain features must be extracted from the CWTs of the AEs for use in training the SOM. For this work, each CWT is divided into 200 windows of 5E-06s in duration covering a 100 kHz frequency range. The power ratio for each windows is then calculated and used as a feature. Having extracted the features from the AEs, the SOM can now be trained, but care is required so that the both damage mechanisms are adequately represented in the training set. This is an issue with paper as the failure of the fibre-fibre bonds is the prevalent damage mechanism. Once a suitable training set is found, the SOM can be trained and its performance analysed. For the SOM described in this work, there is a good chance that it will correctly classify the experimental AEs.

JOSTLE: multilevel graph partitioning software: an overview

In this chapter we look at JOSTLE, the multilevel graph-partitioning software package, and highlight some of the key research issues that it addresses. We first outline the core algorithms and place it in the context of the multilevel refinement paradigm. We then look at issues relating to its use as a tool for parallel processing and, in particular, partitioning in parallel. Since its first release in 1995, JOSTLE has been used for many mesh-based parallel scientific computing applications and so we also outline some enhancements such as multiphase mesh-partitioning, heterogeneous mapping and partitioning to optimise subdomain shape