The effect of reflow process on the contact resistance and reliability of anisotropic conductive film interconnection for flip chip on flex applications

The work presented in this paper focuses on the effect of reflow process on the contact resistance and reliability of anisotropic conductive film (ACF) interconnection. The contact resistance of ACF interconnection increases after reflow process due to the decrease in contact area of the conducting particles between the mating I/O pads. However, the relationship between the contact resistance and bonding parameters of the ACF interconnection with reflow treatment follows the similar trend to that of the as-bonded (i.e. without reflow) ACF interconnection. The contact resistance increases as the peak temperature of reflow profile increases. Nearly 40% of the joints were found to be open after reflow with 260 °C peak temperature. During the reflow process, the entrapped (between the chip and substrate) adhesive matrix tries to expand much more than the tiny conductive particles because of the higher coefficient of thermal expansion, the induced thermal stress will try to lift the bump from the pad and decrease the contact area of the conductive path and eventually, leading to a complete loss of electrical contact. In addition, the environmental effect on contact resistance such as high temperature/humidity aging test was also investigated. Compared with the ACF interconnections with Ni/Au bump, higher thermal stress in the Z-direction is accumulated in the ACF interconnections with Au bump during the reflow process owing to the higher bump height, thus greater loss of contact area between the particles and I/O pads leads to an increase of contact resistance and poorer reliability after reflow.

Requirements and design of an integrated European environmental information communication system, (IEEICS)

The needs for various forms of information systems relating to the European environment and ecosystem are reviewed, and limitations indicated. Existing information systems are reviewed and compared in terms of aims and functionalities. We consider TWO technical challenges involved in attempting to develop an IEEICS. First, there is the challenge of developing an Internet-based communication system which allows fluent access to information stored in a range of distributed databases. Some of the currently available solutions are considered, i.e. Web service federations. The second main challenge arises from the fact that there is general intra-national heterogeneity in the definitions adopted, and the measurement systems used throughout the nations of Europe. Integrated strategies are needed.

When deterrence works - and when it doesn't: a comparison of Sweden's prostitution law and UK's Dangerous Dogs Act

Many pieces of legislation have been implemented with the anticipation - or justification - that they will have a deterrent effect. Deterrence was clearly argued in the debate preceding the Swedish prostitution law prohibiting the purchase of sexual services, but less so regarding the Dangerous Dogs Act, which was a very rapid response to a particular moral panic. As it turned out, the Swedish law has had a deterrent effect on street prostitution in that 'respectable' buyers were deterred. It will be argued that it is this very 'respectability' that makes deterrence work in this case. Regarding the Dangerous Dogs Act, the owners of Pit Bulls and other banned breeds are not considered 'respectable' and the banning might have had the reversed effect - increasing the attraction of these dogs, rather than deterring the ownership. Apart from deterrence and its consequences, the rendering invisible of key actors - buyers and owners respectively - and the use of symbolic legislation to promote moral messages will also be considered. [From the Author]

Current status and perspectives of accelerated carbonation processes on municipal waste combustion residues

The increasing volumes of municipal solid waste produced worldwide are encouraging the development of processes to reduce the environmental impact of this waste stream. Combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash, and fly ash/APC residues. The disposal or reuse of these residues is however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation has been shown to have a potential for improving the chemical stability and leaching behaviour of both bottom ash and fly ash/APC residues. However, the efficacy of carbonation depends on whether the method of gas application is direct or indirect. Also important are the mineralogy, chemistry and physical properties of the fresh ash, the carbonation reaction conditions such as temperature, contact time, CO2 partial pressure and relative humidity. This paper reviews the main issues pertaining to the application of accelerated carbonation to municipal waste combustion residues to elucidate the potential benefits on the stabilization of such residues and for reducing CO2 emissions. In particular, the modification of ash properties that occur upon carbonation and the CO2 sequestration potential possible under different conditions are discussed. Although accelerated carbonation is a developing technology, it could be introduced in new incinerator facilities as a "finishing step" for both ash treatment and reduction of CO2 emissions.