A review of the methodologies used in the computer simulation of evacuation from the built environment

Computer based analysis of evacuation can be performed using one of three different approaches, namely optimisation, simulation or risk assessment. Furthermore, within each approach different means of representing the enclosure, the population, and the behaviour of the population are possible. The myriad of approaches which are available has led to the development of some 22 different evacuation models. This article attempts to describe each of the modelling approaches adopted and critically review the inherent capabilities of each approach. The review is based on available published literature.

A review of the methodologies used in evacuation modelling

Computer based analysis of evacuation can be performed using one of three different approaches, namely optimization, simulation and risk assessment. Furthermore, within each approach different means of representing the enclosure, the population and the behaviour of the population are possible. The myriad of approaches that are available has led to the development of some 22 different evacuation models. This review attempts to describe each of the modelling approaches adopted and critically review the inherent capabilities of each approach. The review is based on available published literature.

[Book reviews] Review of J. E. Hoch, Semitic Words in Egyptian Texts of the New Kingdom and Third Intermediate Period and D. Sivan and Z. Cochavi-Rainey, West Semitic Vocabulary in Egyptian Script of the 14th to the 10th Centuries BCE

Reviews of: [1] James E. Hoch, Semitic Words in Egyptian Texts of the New Kingdom and Third Intermediate Period, (1994), Princeton University Press. [2] Daniel Sivan and Zipora Cochavi-Rainey, West Semitic Vocabulary in Egyptian Script of the 14th to the 10th Centuries BCE, (1992), Ben-Gurion University of the Negev Press.

Review of the technology and reliability issues arising as optical interconnects migrate onto the circuit board

Light has the greatest information carrying potential of all the perceivable interconnect mediums; consequently, optical fiber interconnects rapidly replaced copper in telecommunications networks, providing bandwidth capacity far in excess of its predecessors. As a result the modern telecommunications infrastructure has evolved into a global mesh of optical networks with VCSEL’s (Vertical Cavity Surface Emitting Lasers) dominating the short-link markets, predominately due to their low-cost. This cost benefit of VCSELs has allowed optical interconnects to again replace bandwidth limited copper as bottlenecks appear on VSR (Very Short Reach) interconnects between co-located equipment inside the CO (Central-Office). Spurred by the successful deployment in the VSR domain and in response to both intra-board backplane applications and inter-board requirements to extend the bandwidth between IC’s (Integrated Circuits), current research is migrating optical links toward board level USR (Ultra Short Reach) interconnects. Whilst reconfigurable Free Space Optical Interconnect (FSOI) are an option, they are complicated by precise line-of-sight alignment conditions hence benefits exist in developing guided wave technologies, which have been classified into three generations. First and second generation technologies are based upon optical fibers and are both capable of providing a suitable platform for intra-board applications. However, to allow component assembly, an integral requirement for inter-board applications, 3rd generation Opto-Electrical Circuit Boards (OECB’s) containing embedded waveguides are desirable. Currently, the greatest challenge preventing the deployment of OECB’s is achieving the out-of-plane coupling to SMT devices. With the most suitable low-cost platform being to integrate the optics into the OECB manufacturing process, several research avenues are being explored although none to date have demonstrated sufficient coupling performance. Once in place, the OECB assemblies will generate new reliability issues such as assembly configurations, manufacturing tolerances, and hermetic requirements that will also require development before total off-chip photonic interconnection can truly be achieved

Review of methods to predict solder joint reliability under thermo-mechanical cycling

Solder joints are often the cause of failure in electronic devices, failing due to cyclic creep induced ductile fatigue. This paper will review the modelling methods available to predict the lifetime of SnPb and SnAgCu solder joints under thermo-mechanical cycling conditions such as power cycling, accelerated thermal cycling and isothermal testing, the methods do not apply to other damage mechanisms such as vibration or drop-testing. Analytical methods such as recommended by the IPC are covered, which are simple to use but limited in capability. Finite element modelling methods are reviewed, along with the necessary constitutive laws and fatigue laws for solder, these offer the most accurate predictions at the current time. Research on state-of-the-art damage mechanics methods is also presented, although these have not undergone enough experimental validation to be recommended at present

Killing fields. [Review of Rebel land: among Turkey's forgotten peoples by Christopher de Bellaigua]

Alev Adil explores a region still enraged by a 'crime on the sly'

Nursing resources and patient outcomes in intensive care: a systematic review of the literature

Objectives: To evaluate the empirical evidence linking nursing resources to patient outcomes in intensive care settings as a framework for future research in this area. Background: Concerns about patient safely and the quality of care are driving research on the clinical and cost-effectiveness of health care interventions, including the deployment of human resources. This is particularly important in intensive care where a large proportion of the health care budget is consumed and where nursing staff is the main item of expenditure. Recommendations about staffing levels have been trade but may not be evidence based and may not always be achieved in practice. Methods: We searched systematically for studies of the impact of nursing resources (e.g. nurse-patient ratios, nurses' level of education, training and experience) on patient Outcomes, including mortality and adverse events, in adult intensive care. Abstracts of articles were reviewed and retrieved if they investigated the relationship between nursing resources and patient Outcomes. Characteristics of the studies were tabulated and the quality of the Studies assessed. Results: Of the 15 studies included in this review, two reported it statistical relationship between nursing resources and both mortality and adverse events, one reported ail association to mortality only, seven studies reported that they Could not reject the null hypothesis of no relationship to mortality and 10 studies (out of 10 that tested the hypothesis) reported a relationship to adverse events. The main explanatory mechanisms were the lack of time for nurses to perform preventative measures, or for patient surveillance. The nurses' role in pain control was noted by One author. Studies were mainly observational and retrospective and varied in scope from 1 to 52 units. Recommendations for future research include developing the mechanisms linking nursing resources to patient Outcomes, and designing large multi-centre prospective Studies that link patient's exposure to nursing care oil a shift-by-shift basis over time. (C) 2007 Elsevier Ltd. All rights reserved.