Modelling and prototyping the conceptual design of 3D CMM micro-probe

This paper details the prototyping of a novel three axial micro probe based on utilisation of piezoelectric sensors and actuators for true three dimensional metrology and measurements at micro- and nanometre scale. Computational mechanics is used first to model and simulate the performance of the conceptual design of the micro-probe. Piezoelectric analysis is conducted to understand performance of three different materials - silicon, glassy carbon, and nickel - and the effect of load parameters (amplitude, frequency, phase angle) on the magnitude of vibrations. Simulations are also used to compare several design options for layout of the lead zirconium titanate (PZT) sensors and to identify the most feasible from fabrication point of view design. The material options for the realisation of the device have been also tested. Direct laser machining was selected as the primary means of production. It is found that a Yb MOPA based fiber laser was capable of providing the necessary precision on glassy carbon (GC), although machining trials on Si and Ni were less successful due to residual thermal effects.To provide the active and sensing elements on the flexures of the probe, PZT thick films are developed and deposited at low temperatures (Lt720 degC) allowing a high quality functional ceramic to be directly integrated with selected materials. Characterisation of the materials has shown that the film has a homogenous and small pore microstructure.

Private equity and employment - the Davos/WEF/Harvard study

The World Economic Forum at Davos has published a major study showing that workplaces of firms taken over by private equity have 10% less employees 5 years after the takeover, than other similar workplaces. The rate of plant closures, opening, acquisitions and disposals is twice as high as in other firms, and the net effect is still a job loss of 3.6%-4.5% after only 2 years, compared with other firms. Firms taken over by private equity are also more likely to go bankrupt than publicly quoted firms.

Multi-physics-multi-scale simulation and optimisation: the next generation

FEA and CFD analysis is becoming ever more complex with an emerging demand for simulation software technologies that can address ranges of problems that involve combinations of interactions amongst varying physical phenomena over a variety of time and length scales. Computation modelling of such problems requires software technologies that enable the representation of these complex suites of 'physical' interactions. This functionality requires the structuring of simulation modules for specific physical phemonmena so that the coupling can be effectiely represented. These 'multi-physics' and 'multi-scale' computations are very compute intensive and so the simulation software must operate effectively in parallel if it is to be used in this context. Of course the objective of 'multi-physics' and 'multi-scale' simulation is the optimal design of engineered systems so optimistation is an important feature of such classes of simulation. In this presentation, a multi-disciplinary approach to simulation based optimisation is described with some key examples of application to challenging engineering problems.

[Conference report] Magic and mathematics: The life and work of John Dee. National Maritime Museum, Greenwich, 13-14 June 2003

Tony Mann provides a report of a two-day meeting "Magic and mathematics: The life and work of John Dee" held from 13-14 June 2003 at the National Maritime Museum, Greenwich.

Airborne transport of Saharan dust to the Mediterranean and to the Atlantic

The Sahara desert is a significant source of particulate pollution not only to the Mediterranean region, but also to the Atlantic and beyond. In this paper, PM 10 exceedences recorded in the UK and the island of Crete are studied and their source investigated, using Lagrangian Particle Dispersion (LPD) methods. Forward and inverse simulations identify Saharan dust storms as the primary source of these episodes. The methodology used allows comparison between this primary source and other possible candidates, for example large forest fires or volcanic eruptions. Two LPD models are used in the simulations, namely the open source code FLEXPART and the proprietary code HYSPLIT. Driven by the same meteorological fields (the ECMWF MARS archive and the PSU/NCAR Mesoscale model, known as MM5) the codes produce similar, but not identical predictions. This inter-model comparison enables a critical assessment of the physical modelling assumptions employed in each code, plus the influence of boundary conditions and solution grid density. The outputs, in the form of particle concentrations evolving in time, are compared against satellite images and receptor data from multiple ground-based sites. Quantitative comparisons are good, especially in predicting the time of arrival of the dust plume in a particular location.

Family, community and politics: the fertile legacy of Michael Young

The Institute of Community Studies was set up by Michael Young in order to carry out research on politically relevant social issues, in a context free from direct political control. A research method was devised for it whereby researchers made their own values and objectives very explicit, while staying as close as possible in their reports to the concerns and language of respondents themselves. This method has often been criticized by professional sociologists: but it reflects quite well the nature of social knowledge. It has produced reports which help to increase public understanding of social processes, and provide useful guidance to policy makers. Professional sociology on the other hand has tried to develop a rigorously value-free method. As a result, though, it often seems to be tied implicitly to values shared among researchers but not more universally. Arguably this makes it harder for the general public to understand, and accept, its findings.

On treating the symptoms and not the cause: reflections on the Dangerous Dogs Act

The experience of saving a dog that later turned out to be a Pit Bull and therefore banned under the Dangerous Dogs Act 1991, made me investigate the Act and its implications. The Act is not built on evidence and by compiling results from different studies on dog bites and breed‐specific legislation in different countries the conclusion is that there is not much empirical support for breed bans either. ‘Dangerous breeds’ do not bite more frequently than German Shepherds and directing legislation towards certain breeds deemed as ‘dangerous’ cannot therefore be seen as justified. The strength of the label ‘dangerous dog’ seems to rule out policies that follow the facts and there is more treating of symptoms than causes. [From the Author]

A new poetics of exile and belonging: the place of memory in the new media environment

This paper explores how new media environments represent and create collective memories of trauma; how creative digital practice can be a key methodology for memory studies and the potential of digital interfaces for representing and reconciling collective memories of trauma, particularly in the context of Cyprus. My project MemoryBank will be used as a model to discuss the potential role of creative digital media practice in both community arts and the formal education process in order to enable participants to engage with the process of peace and reconciliation in Cyprus and circumvent and negotiate politically ossified collective memory narratives and chauvinistic histories. [From the Author]

A small screen alternative to stone and bronze: The Great War series and British television

This article examines the first major British television series about the First World War, The Great War (BBC, 1964), in terms of its cultural, historical and aesthetic significance. As a central component of the BBC`s 50th anniversary commemorative programme to mark the outbreak of war, the series was a major media event -a small-screen memorial cast in sounds and images instead of stone and bronze. This article looks at how the British television audience responded to this form of on-screen commemoration. Material for this article was derived from the series' extensive production records housed in the BBC Written Archives Centre at Caversham, Berkshire. This was supplemented by, among other sources, material from interviews and correspondence with several surviving members of the production team. This allows a broader understanding of the motivations of those involved in the production of a groundbreaking historical series, while acknowledging the wide-ranging nature of its audience. [From the Publisher]