Modelling of industrial multi-physics processes—a key role for computational mechanics.

In the analysis of industrial processes, there is an increasing emphasis on systems governed by interacting continuum phenomena. Mathematical models of such multi-physics processes can only be achieved for practical simulations through computational solution procedures—computational mechanics. Examples of such multi-physics systems in the context of metals processing are used to explore some of the key issues. Finite-volume methods on unstructured meshes are proposed as a means to achieve efficient rapid solutions to such systems. Issues associated with the software design, the exploitation of high performance computers, and the concept of the virtual computational-mechanics modelling laboratory are also addressed in this context.

Bulk synchronous parallelization of industrial electromagentic software

The parallelization of existing/industrial electromagnetic software using the bulk synchronous parallel (BSP) computation model is presented. The software employs the finite element method with a preconditioned conjugate gradient-type solution for the resulting linear systems of equations. A geometric mesh-partitioning approach is applied within the BSP framework for the assembly and solution phases of the finite element computation. This is combined with a nongeometric, data-driven parallel quadrature procedure for the evaluation of right-hand-side terms in applications involving coil fields. A similar parallel decomposition is applied to the parallel calculation of electron beam trajectories required for the design of tube devices. The BSP parallelization approach adopted is fully portable, conceptually simple, and cost-effective, and it can be applied to a wide range of finite element applications not necessarily related to electromagnetics.

Numerical predictions of particle degradation in industrial-scale pneumatic conveyors

This paper presents an Eulerian-based numerical model of particle degradation in dilute-phase pneumatic conveying systems including bends of different angles. The model shows reasonable agreement with detailed measurements from a pilot-sized pneumatic conveying system and a much larger scale pneumatic conveyor. The potential of the model to predict degradation in a large-scale conveying system from an industrial plant is demonstrated. The importance of the effect of the bend angle on the damage imparted to the particles is discussed.

Hypertension - a contemporary approach to nursing care

The incidence of hypertension is increasing as the number of patients with obesity and diabetes mellitus increases. Hypertension results when the peripheral vascular resistance is increased, the blood viscosity is elevated and/or the flow of blood through the main arteries is impeded. Chronic hypertension results in enlarged heart, myocardial damage and lung and renal abnormalities. While some causative factors such as obesity can be controlled, others for example genetics are more difficult to treat because often there is more than one factor involved. This paper explores how essential and secondary factors contribute to the incidence of hypertension and the physiological changes resulting from raised blood pressure. It proposes that although traditional treatment has some success, nurse-led clinics are having better success not only in controlling raised blood pressure but also in reducing cardiac, pulmonary and renal morbidity. It is more cost-effective, staff is more productive and clients are more compliant with treatment.

Nursing resources and patient outcomes in intensive care: a systematic review of the literature

Objectives: To evaluate the empirical evidence linking nursing resources to patient outcomes in intensive care settings as a framework for future research in this area. Background: Concerns about patient safely and the quality of care are driving research on the clinical and cost-effectiveness of health care interventions, including the deployment of human resources. This is particularly important in intensive care where a large proportion of the health care budget is consumed and where nursing staff is the main item of expenditure. Recommendations about staffing levels have been trade but may not be evidence based and may not always be achieved in practice. Methods: We searched systematically for studies of the impact of nursing resources (e.g. nurse-patient ratios, nurses' level of education, training and experience) on patient Outcomes, including mortality and adverse events, in adult intensive care. Abstracts of articles were reviewed and retrieved if they investigated the relationship between nursing resources and patient Outcomes. Characteristics of the studies were tabulated and the quality of the Studies assessed. Results: Of the 15 studies included in this review, two reported it statistical relationship between nursing resources and both mortality and adverse events, one reported ail association to mortality only, seven studies reported that they Could not reject the null hypothesis of no relationship to mortality and 10 studies (out of 10 that tested the hypothesis) reported a relationship to adverse events. The main explanatory mechanisms were the lack of time for nurses to perform preventative measures, or for patient surveillance. The nurses' role in pain control was noted by One author. Studies were mainly observational and retrospective and varied in scope from 1 to 52 units. Recommendations for future research include developing the mechanisms linking nursing resources to patient Outcomes, and designing large multi-centre prospective Studies that link patient's exposure to nursing care oil a shift-by-shift basis over time. (C) 2007 Elsevier Ltd. All rights reserved.

Industrial water pollution in Dhaka, Bangladesh: strategies and incentives for pollution control in small and medium enterprises

The extent and gravity of the environmental degradation of the water resources in Dhaka due to untreated industrial waste is not fully recognised in international discourse. Pollution levels affect vast numbers, but the poor and the vulnerable are the worst affected. For example, rice productivity, the mainstay of poor farmers, in the Dhaka watershed has declined by 40% over a period of ten years. The study found significant correlations between water pollution and diseases such as jaundice, diarrhoea and skin problems. It was reported that the cost of treatment of one episode of skin disease could be as high as 29% of the weekly earnings of some of the poorest households. The dominant approach to deal with pollution in the SMEs is technocratic. Given the magnitude of the problem this paper argues that to control industrial pollution by SMEs and to enhance their compliance it is necessary to move from the technocratic approach to one which can also address the wider institutional and attitudinal issues. Underlying this shift is the need to adopt the appropriate methodology. The multi-stakeholder analysis enables an understanding of the actors, their influence, their capacity to participate in, or oppose change, and the existing and embedded incentive structures which allow them to pursue interests which are generally detrimental to environmental good. This enabled core and supporting strategies to be developed around three types of actors in industrial pollution, i.e., (i) principal actors, who directly contribute to industrial pollution; (ii) stakeholders who exacerbate the situation; and (iii) potential actors in mitigation. Within a carrot-and-stick framework, the strategies aim to improve environmental governance and transparency, set up a packet to incentive for industry and increase public awareness.

Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m3 and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.

Accelerated carbonation treatment of industrial wastes

The disposal of industrial waste presents major logistical, financial and environmental issues. Technologies that can reduce the hazardous properties of wastes are urgently required. In the present work, a number of industrial wastes arising from the cement, metallurgical, paper, waste disposal and energy industries were treated with accelerated carbonation. In this process carbonation was effected by exposing the waste to pure carbon dioxide gas. The paper and cement wastes chemically combined with up to 25% by weight of gas. The reactivity of the wastes to carbon dioxide was controlled by their constituent minerals, and not by their elemental composition, as previously postulated. Similarly, microstructural alteration upon carbonation was primarily influenced by mineralogy. Many of the thermal wastes tested were classified as hazardous, based upon regulated metal content and pH. Treatment by accelerated carbonation reduced the leaching of certain metals, aiding the disposal of many as stable non-reactive wastes. Significant volumes of carbon dioxide were sequestrated into the accelerated carbonated treated wastes.

Why do nursing students who consider leaving stay on their courses?

A global shortage of nurses means there is an increasing interest in attrition rates among nursing students. This UK research by Julie Bowden looked at attrition from the perspective of those who almost left, but ultimately stayed. It highlights the importance of the support provided by personal tutors.

The impact of the nursing workforce on patient outcomes in intensive care

Introduction: Evidence from studies conducted mainly in the US and mainland Europe suggests that characteristics of the workforce, such as nurse patient ratios and workload (measured in a number of different ways) may be linked to variations in patient outcomes across health care settings (Carmel and Rowan 2001). Few studies have tested this relationship in the UK thus questions remain about whether we are justified in extrapolating evidence from studies conducted in very different health care systems. Objectives: To investigate whether characteristics of the nursing workforce affect patient mortality UK Intensive Care Units. Data: Patient data came from the case mix programme, Intensive Care National Audit and Research Centre (ICNARC), while information about the units came from a survey of all ICUs in England (Audit Comission 1998). The merged data set contained information on 43,859 patients in 69 units across England. ICNARC also supplied a risk adjustment variable to control for patient characteristics that are often the most important determinants of survival. Methods: Multivariate multilevel logistic regression. Findings: Higher numbers of direct care nurses and lower scores on measures of workload(proportion of occupied beds at the time the patient was admitted and mean daily transfers into the unit) were associated with lower mortality rates. Furthermore, the effect of the number of direct care nurses was greatest on the life chances of the patients who were most at risk of dying. Implications: This study has wide implications for workforce policy and planning because it shows that the size of the nursing workforce is associated with mortality (West et al 2006). Few studies have demonstrated this relationship in the UK. This study has a number of strengths and weaknesses and further research is required to determine whether this relationship between the nursing workforce and patient outcomes is causal.

An industrial implementation of a methodology for the optimisation of product design tolerances

Today, the key to commercial success in manufacturing is the timely development of new products that are not only functionally fit for purpose but offer high performance and quality throughout their entire lifecycle. In principle, this demands the introduction of a fully developed and optimised product from the outset. To accomplish this, manufacturing companies must leverage existing knowledge in their current technical, manufacturing and service capabilities. This is especially true in the field of tolerance selection and application, the subject area of this research. Tolerance knowledge must be readily available and deployed as an integral part of the product development process. This paper describes a methodology and framework,currently under development in a UK manufacturer, to achieve this objective.

Violence and aggression in the emergency department: factors impinging on nursing research

This paper examines issues involved in the debate regarding the role of research in nursing. The authors take the example of violence and aggression in the emergency field to discuss methodological, philosophical, professional, logistical, power differentials and leadership theory that influence and explain the process of conducting research surrounding violence and aggression experienced by nurses working in emergency departments. The paper examines the importance of research and discusses practical issues that impinge or frustrate clinical nursing staff who wish to conduct original research.

Meeting the health needs of people with learning disabilities: guidance for nursing staff

This guide has been produced to support registered nurses and nursing students in primary and secondary care, who are trained in branches other than learning disabilities, to deliver high quality health care to people with learning disabilities.