Experimental and Modelling Analysis on the Moisture Induced Failures in Flip Chip on Flex Interconnections with Anisotropic Conductive Film

This paper reports the investigations into the moisture induced failures in flip-chip-on-flex interconnections with anisotropic conductive films (ACF). Both experimental and modeling methods were applied. In the experiments, the contact resistance was used as a quality indicator and was measured continuously during the accelerated tests (autoclave tests). The temperature, relative humidity and the pressure were set at 121°C, 100%RH, 1atm respectively. The contact resistance of the ACF joints increased during the tests and nearly 25% of the joints were found to be open after 168 hours' testing time. Visible conduction gaps between the adhesive and substrate pads were observed. Cracks at the adhesive/flex interface were also found. It is believed that the swelling effect of the adhesive and the water penetration along the adhesive/flex interface are the main causes of this contact degradation. Another finding from the experimental work was that the ACF interconnections that had undergone the reflow treatment were more sensitive to the moisture and showed worse reliability during the tests. For a better understanding of the experimental results, 3D finite element (FE) models were built and a macro-micro modeling method was used to determine the moisture diffusion and moisture-induced stresses inside the ACF joints. Modeling results are consistent with the findings in the experimental work.

More public rescues for more private finance failures - a critique of the EC Communication on PPPs

A critique of the EC Communication on PPPs, challenging the scale of state aid offered to PPPs, the role of PPPs in the economic recovery strategy for the EU, and drawing attention to the damage done to public authorities by 'innovative' financing mechanisms.

The development and validation of computational MHD techniques for the modelling of metal production processes

Magnetic fields are used in a number of processes related to the extraction of metals, production of alloys and the shaping of metal components. Computational techniques have an increasingly important role to play in the simulation of such processes, since it is often difficult or very costly to conduct experiments in the high temperature conditions encountered and the complex interaction of fluid flow, heat transfer and magnetic fields means simple analytic models are often far removed from reality. In this paper an overview of the computational activity at the University of Greenwich is given in this area, covering the past ten years. The overview is given from the point of view of the modeller and within the space limitations imposed by the format it covers the numerical methods used, attempts at validation against experiments or analytic procedures; it highlights successes, but also some failures. A broad range of models is covered in the review (and accompanying lecture), used to simulate (a) A-C field applications: induction melting, magnetic confinement and levitation, casting and (b) D-C field applications such as: arc welding and aluminium electroloysis. Most of these processes involve phase change of the metal (melting or solidification), the presence of a dynamic free surface and turbulent flow. These issues affect accuracy and need to be address by the modeller.

An analysis of human behaviour during aircraft evacuation situations using the AASK v3.0 database

The Aircraft Accident Statistics and Knowledge (AASK) database is a repository of survivor accounts from aviation accidents. Its main purpose is to store observational and anecdotal data from the actual interviews of the occupants involved in aircraft accidents. The database has wide application to aviation safety analysis, being a source of factual data regarding the evacuation process. It is also key to the development of aircraft evacuation models such as airEXODUS, where insight into how people actually behave during evacuation from survivable aircraft crashes is required. This paper describes recent developments with the database leading to the development of AASK v3.0. These include significantly increasing the number of passenger accounts in the database, the introduction of cabin crew accounts, the introduction of fatality information, improved functionality through the seat plan viewer utility and improved ease of access to the database via the internet. In addition, the paper demonstrates the use of the database by investigating a number of important issues associated with aircraft evacuation. These include issues associated with social bonding and evacuation, the relationship between the number of crew and evacuation efficiency, frequency of exit/slide failures in accidents and exploring possible relationships between seating location and chances of survival. Finally, the passenger behavioural trends described in analysis undertaken with the earlier database are confirmed with the wider data set.

Modelling the effect of temperature on product reliability

Reliability of electronic parts is a major concern for many manufacturers, since early failures in the field can cost an enormous amount to repair - in many cases far more than the original cost of the product. A great deal of effort is expended by manufacturers to determine the failure rates for a process or the fraction of parts that will fail in a period of time. It is widely recognized that the traditional approach to reliability predictions for electronic systems are not suitable for today's products. This approach, based on statistical methods only, does not address the physics governing the failure mechanisms in electronic systems. This paper discusses virtual prototyping technologies which can predict the physics taking place and relate this to appropriate failure mechanisms. Simulation results illustrate the effect of temperature on the assembly process of an electronic package and the lifetime of a flip-chip package.

Moisture Effects on the Reliability of Anisotropic Conductive Film Interconnection for Flip Chip on Flex Applications

Anisotropic conductive film (ACF) which consists of an adhesive epoxy matrix and randomly distributed conductive particles are widely used as the connection material for electronic devices with high I/O counts. However, for the semiconductor industry the reliability of the ACF is still a major concern due to a lack of experimental reliability data. This paper reports the investigations into the moisture-induced failures in Flip-Chip-on-Flex interconnections with Anisotropic Conductive Films (ACFs). Both experimental and modeling methods were applied. In the experiments, the contact resistance was used as a quality indicator and was measured continuously during the accelerated tests (autoclave tests). The temperature, relative humidity and the pressure were set at 121°C, 100%RH, and 2atm respectively. The contact resistance of the ACF joints increased during the tests and nearly 25% of the joints were found to be open after 168 hours’ testing time. Visible conduction gaps between the adhesive and substrate pads were observed. Cracks at the adhesive/flex interface were also found. For a better understanding of the experimental results, 3-D Finite Element (FE) models were built and a macro-micro modeling method was used to determine the moisture diffusion and moisture-induced stresses inside the ACF joints. Modeling results are consistent with the findings in the experimental work.

Modelling the Lamination Process for Ruggedised Displays

Active matrix liquid crystal displays (AMLCD) need to be protected in severe environments. This is achieved through a ruggedisation process, where the display is laminated with cover glasses to become a more robust structure. The ruggedisation process can in itself cause stresses in the display and this can lead to delamination failures during the lamination process, during qualification testing or in-service. Controlling the magnitude of stress in a display during the lamination process is of course very important and this depends highly on the materials used. This paper discusses the use of finite element analysis to investigate the use of different materials in the lamination process and how such materials can affect the stress magnitude in the display.

Modeling the effect of lead-free soldering on flexible substrates

Flexible Circuit Boards (FPCs) are now being widely used in the electronic industries especially in the areas of electronic packages. Due to European lead-free legislation which has been implemented since July 2006, electronic packaging industries have to switch to use in the lead-free soldering technology. This change has posed a number of challenges in terms of development of lead-free solders and compatible substrates. An increase of at least 20-50 degrees in the reflow temperature is a concern and substantial research is required to investigate a sustainable design of flexible circuit boards as carrier substrates. This paper investigates a number of design variables such as copper conductor width, type of substrate materials, effect of insulating materials, etc. Computer modeling has been used to investigate thermo-mechanical behavior, and reliability, of flexible substrates after they have been subjected to a lead- free solder processing. Results will show particular designs that behave better for a particular rise in peak reflow temperature. Also presented will be the types of failures that can occur in these substrates and what particular materials are more reliable.

Analysis of crush behaviours of a rail cab car and structural modifications for improved crashworthiness

In this paper, the authors present a crashworthiness assessment and suggestions for modification of a conventionally designed rail vehicle with a driving cab (cab car). The analytical approach, based on numerical analysis, consisted of two stages. Firstly, the crashworthiness of the cab car was assessed by simulating a collision between the cab car and a rigid wall. Then, after analysing structural weaknesses, the design of the cab car was modified and simulated again in the same scenario. It was found that downward bending is an intrinsic weakness in conventional rail vehicles and that jackknifing is a main form of failures in conventional rail vehicle components. The cab car, as modified by the authors, overcomes the original weaknesses and shows the desired progressive collapse behaviour in simulation. The conclusions have general relevance for other studies but more importantly, point to the need for a rethink of some aspects of rail vehicle design.

Failure mechanisms of ACF joints under isothermal ageing

The possible failure mechanisms of anisotropic conductive film (ACF) joints under isothermal ageing conditions have been identified through experiments. It has been found that ACF joints formed at higher bonding temperatures can prevent increases in the contact resistance for any ageing temperature. The higher the ageing temperature the higher the electrical failure rate is. The formation of conduction gaps between the conductive particles and the pads and damages to the metal coatings of the particle have been identified as the reasons behind the electrical failures during ageing. In order to understand the mechanism for the formation of the conduction gap and damages in metal coatings during the isothermal ageing, computer modelling has been carried out and the results are discussed extensively. The computer analysis shows that stresses concentrate at the edges of the particle–pad interface, where the adhesive matrix meets the particle. This could lead to subsequent damages and reductions in the adhesion strength in that region and it is possible for the conductive particle to be detached from the pad and the adhesive matrix. It is believed that because of this a conduction gap appears. Furthermore, under thermal loading the thermal expansion of the adhesive matrix squeezes the conductive particle and damages the metal coatings. Experimental evidences support this computational finding. It is, therefore, postulated that if an ACF-based electronic component operates in a high temperature aging condition, its electrical and mechanical functionalities will be at risk.

Flexible and robust run-time configuration for self-managing systems

This paper describes a methodology for deploying flexible dynamic configuration into embedded systems whilst preserving the reliability advantages of static systems. The methodology is based on the concept of decision points (DP) which are strategically placed to achieve fine-grained distribution of self-management logic to meet application-specific requirements. DP logic can be changed easily, and independently of the host component, enabling self-management behavior to be deferred beyond the point of system deployment. A transparent Dynamic Wrapper mechanism (DW) automatically detects and handles problems arising from the evaluation of self-management logic within each DP and ensures that the dynamic aspects of the system collapse down to statically defined default behavior to ensure safety and correctness despite failures. Dynamic context management contributes to flexibility, and removes the need for design-time binding of context providers and consumers, thus facilitating run-time composition and incremental component upgrade.

International perspectives on energy policy and the role of nuclear power

In this book, expert energy economists assess the energy policy of thirty-one countries and the role of nuclear power. For many years the shock of Chernobyl took nuclear power off the agenda in most countries. Intense public relations activities by the industry, increasing evidence of climate change and failures to effectively reduce greenhouse gas emissions, have brought nuclear power issues back to the forefront of policy discussion in the nuclear renaissance countries. But some countries are just not prepared to go in that direction and, indeed, are still divesting themselves of their nuclear legacy, the nuclear phase-out countries. And how are nuclear issues being approached in the industrializing countries? An in-depth country-by-country analysis is presented within this framework. Out of such an analysis emerge thematic discussions on, among others, strategy in energy policy; nuclear plant safety, the impacts of nuclear accidents; the adequacy of nuclear power expertise. [Source: publisher's product description].

The food multimix concept: new innovative approach to meeting nutritional challenges in Sub-Saharan Africa

Food insecurity, chronic hunger, starvation and malnutrition continue to affect millions of individuals throughout the developing world, especially Sub-Saharan Africa. Various initiatives by African governments and International Agencies such as the UN, the industrial nations, the International Monetary Fund, the World Bank and the World Trade Organisation to boost economic development, have failed to provide the much-needed solution to these challenges. The impact of these economic shifts and the failures of structural adjustment programmes on the nutritional well-being and health of the most vulnerable members of poor communities cannot be over-emphasised. The use of ad hoc measures as an adjunct to community-based rural integrated projects have provided little success and will be unsustainable unless they are linked to harnessing available local resources. The present paper therefore focuses on exploring alternative ways of harnessing the scant agricultural resources by employing a scientific approach to food-related problem-solving. The food multimix (FMM) concept offers a scientific contribution alongside other attempts currently in use by the World Food Programme, WHO and FAO to meet the food insecurity challenges that confront most of the developing world in the twenty-first century. It is an innovative approach that makes better use of traditional food sources as a tool for meeting community nutritional needs. The FMM concept employs a food-based approach using traditional methods of food preparation and locally-available, cheap and affordable staples (fruits, pulses, vegetables and legumes) in the formulation of nutrient-enriched multimixes. Developed recipes can provide >= 40% of the daily nutritional requirements of vulnerable groups, including patients with HIV/AIDS and children undergoing nutrition rehabilitation. The FMM approach can also be used as a medium- to long-term adjunct to community-based rural integration projects aimed at health improvement and economic empowerment in Sub-Saharan Africa.

Relational dimensions of corporate governance in translation: networked governance in China and India

The effectiveness of corporate governance mechanisms has been a subject of academic research for many decades. Although the large majority of corporate governance studies prior to mid 1990s were based on data from developed market economies such as the U.S., U.K. and Japan, in recent years researchers have begun examining corporate governance in transition economies. A comparison of China and India offers a unique environment for analyzing the effectiveness of corporate governance. First, both countries state-owned enterprise (SOE) reform strategies hinges on the Modern Enterprise System characterized by the separation of ownership and control. Ownership of an SOE’s assets is distributed among the government, institutional investors, managers, employees, and private investors. Effective control rights are assigned to management, which generally has a very small, or even nonexistent ownership stake. This distinctive shareholding structure creates conflict of interest not only between management (insiders) and outside investors but also between large shareholders and minority investors. Moreover, because both governments desire to retain some control—in part through partial retained ownership of commercialized SOEs, further conflicts arise between politicians and firms. Second, directors in publicly listed firms in both countries are predominantly drawn from institutions with significant non-market objectives: the government and other state enterprises, particularly in China, and extended families, particularly in India. As a result, the effectiveness of internal governance mechanisms, such as the number of independent directors on the board and the number of independent supervisors on the supervisory committee, are likely to be quiet limited, although this has yet to be fully evaluated. Third, because of the political nature of the privatization process itself, typical external governance mechanisms, such as debt (in conjunction with appropriate bankruptcy procedures), takeover threats, legal protection of investors, product market competition, etc., have not been effective. Bank loans have traditionally been viewed as grants from the state designed to bail out failing firms. State-owned banks retain monopoly or quasi-monopoly positions in the banking sector and profit is not their overriding objective. If political favor is deemed appropriate, subsidized loans, rescheduling of overdue debt or even outright transfer of funds can be arranged with SOEs (soft budget constraints). In addition, a market for private, non-bank debt is limited in India and has yet to be established China. There is no active merger or takeover activity in Chinese stock markets to discipline management. Information available in the capital markets is insufficient to keep at arm’s length of the corporate decisions. In light of the above peculiarities, China and India share many of the typical institutional characteristics as a transition economy, including poor legal protection of creditors and investors, the absence of an effective takeover market, an underdeveloped capital market, a relative inefficient banking system and significant interference of politicians in firm management. Su (2005) finds that the extent of political interference, managerial entrenchment and institutional control can help explain corporate dividend policies and post-IPO financing choices in this situation. Allen et al. (2005) demonstrate that standard corporate governance mechanisms are weak and ineffective for publicly listed firms while alternative governance mechanisms based on reputation and relationship have been remarkably effective in the private sector. Because the peculiarities are significant in this context, the differences in the political-economies of the two countries are likely to be evident in such relational terms. In this paper we explore the peculiarities of corporate governance in this transitional environment through a systematic examination of certain aspects of these reputational and relationship dimensions. Utilising the methods of social network analysis we identify the inter-organisational relationships at board level formed by equity holdings and by shared directors. Using data drawn from the Orbis database we map these relations among the 3700 largest firms in India and China respectively and identify the roles played in these relational networks by the particularly characteristic institutions in each case. We find greatly different social network structures in each case with some support in these relational dimensions for their distinctive features of governance. Further, the social network metrics allow us to considerably refine proxies for political interference, managerial entrenchment and institutional control used in earlier econometric analysis.

The Olympic Games and urban displacement: the case of Beijing

Urban spectacles such as the Olympic Games have been long perceived as being able to impose desired effects in the city that act as host. This kind of urban boost may include the creation of new jobs and revenue for local community, growth in tourism and convention business, improvements to city infrastructure and environment, and the stimulation of broad reform in the social, political and institutional realm. Nevertheless at the other end of the debate, the potentially detrimental impacts of Olympic urban development, particularly on disadvantaged and vulnerable groups, have also been increasingly noticed in recent years and subsequently cited by a number of high profile anti-Olympic groups to campaign against Olympic bids and awards. The common areas of concern over Olympic-related projects include the cost and debts risk, environmental threat, the occurrence of social imbalance, and disruption and disturbance of existing community life. Among these issues, displacement of low income households and squatter communities resulting from Olympic-inspired urban renewal are comparatively under-explored and have emerged as an imperative area for research inquiry. This is particularly the case where many other problems have become less prominent. Changing a city’s demographic landscape, particularly displacing lower income people from the area proposed for a profitable development is a highly contentious matter in its own right. Some see it as a natural and inevitable outgrowth of the process of urban evolution, without which cities cannot move towards a more attractive location for consumption-based business. Others believe it reflects urban crises and conflicts, highlighting the market failures, polarization and injustice. Regardless of perception,these phenomena are visible everywhere in post-industrial cities and particularly cannot be ignored when planning for the Olympic Games and other mega-events. The aim of this paper is to start the process of placing the displacement issue in the context of Olympic preparation and to seek a better understanding of their interrelations. In order to develop a better understanding of this issue in terms of cause, process, influential factors and its implication on planning policy, this paper studies the topic from both theoretic and empirical angles. It portrays various situations where the Olympics may trigger or facilitate displacement in host cities during the preparation of the Games, identifies several major variables that may affect the process and the overall outcome, and explores what could be learnt in generic terms for planning Olympic oriented infrastructure so that ill-effects to the local community can be effectively controlled. The paper concludes that the selection of development sites, the integration of Olympic facilities with the city’s fabric, the diversity of housing type produced for local residents and the dynamics of the new socioeconomic structure.