Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance

Solder paste plays an important role in the electronic assembly process by providing electrical, mechanical and thermal bonding between the components and the substrate. The rheological characterisation of pastes is an important step in the design and development of new paste formulations. With the ever increasing trend of miniaturisation of electronic products, the study of the rheological properties of solder pastes is becoming an integral part in the R&D of new paste formulations and in the quality monitoring and control during paste manufacture and electronic assembly process. This research work outlines some of the novel techniques which can be successfully used to investigate the rheology of leadfree solder pastes. The report also presents the results of the correlation of rheological properties with solder paste printing performance. Four different solder paste samples (namely paste P1, P2, P3 and P4) with different flux vehicle systems and particle size distributions were investigated in the study. As expected, all the paste samples showed shear thinning behaviour. Although the samples displayed similar flow behaviour at high shear rates, differences were observed at low shear rates. In the stencil printing trials, round deposits showed better results than rectangular deposits in terms of paste heights and aperture filling. Our results demonstrate a good correlation between higher paste viscosity and good printing performance. The results of the oscillatory and thixotropy tests were also successfully correlated to the printing behaviour of solder paste.

Solid phase velocity measurements utilising electrostatic sensors and cross correlation signal processing

Gas-solids two phase systems are widely employed within process plant in the form of pneumatic conveyors, dust extraction systems and solid fuel injection systems. The measurement of solids phase velocity therefore has wide potential application in flow monitoring and, in conjunction with density measurement instrumentation, solids mass flow rate measurement. Historically, a number of authors have detailed possible measurement techniques, and some have published limited test results. It is, however, apparent that none of these technologies have found wide application in industry. Solids phase velocity measurements were undertaken using real time cross correlation of signals from two electrostatic sensors spaced axially along a pipeline conveying pulverised coal (PF). Details of the measurement equipment, the pilot scale test rig and the test results are presented.

The palaeoenvironment and stratigraphy of Late Cretaceous Chalks

Since the publication of Hancock's ‘the Petrology of the Chalk’ there have been numerous developments in our appreciation of the palaeoenvironment and stratigraphie correlation of the UK Chalk. This work presents a review of some of the key developments over the last 30 years. Our detailed understanding of Chalk lithostratigraphy and advances in our understanding of chalk sedimentation indicate that large-scale mass transport and re-sedimentation of chalks by low-angle suspension flows is required to explain the observed thickness variations. The provenance of clay minerals and the process of flint and granular phosphate formation are discussed. The growing importance of isotopic studies in high resolution stratigraphy and improving our understanding of the late Cretaceous oceans and climate are emphasized. Developments in lithostratigraphic studies and recent proposals for a new stratigraphie division of the Chalk in the UK are evaluated.