The impact of powder flowing properties on dosator filling system operation

Purpose: To study the impact of powder flow properties on dosator filling systems, with particular focus on improvements in dose weight accuracy and repeatability. Method: This study evaluates a range of critical powder flow properties such as: flow function, cohesion, wall friction, adhesion to wall surfaces, density/compressibility data, stress ratio “K” and gas permeability. The characterisations of the powders considered in this study were undertaken using an annular shear cell using a sample size of 0.5 litres. This tester also incorporated the facility to measure bed expansion during shear in addition to contraction under consolidation forces. A modified Jenike type linear wall friction tester was used to develop the failure loci for the powder sample in conjunction with multiple wall samples (representing a variety of material types and surface finishes). Measurements of the ratio of applied normal stress versus lateral stress were determined using a piece of test equipment specifically designed for the purpose. Results: The correct characterisation of powders and the incorporation of this data into the design of process equipment are recognised as critical for reliable and accurate operation. An example of one aspect of this work is the stress ratio “K”. This characteristic is not well understood or correctly interpreted in many cases – despite its importance. Fig 1 [Omitted] (illustrates a sample of test data. The slope of the line gives the stress ratio in a uniaxial compaction system – indicating the behaviour of the material under compaction during dosing processes. Conclusions: A correct assessment of the bulk powder properties for a given formulation can allow prediction of: cavity filling behaviour (and hence dosage), efficiency of release from dosator, and strength and stability of extruded dose en route to capsule filling Influences over the effectiveness of dosator systems have been shown to be impacted upon by: bed pre-compaction history, gas permeability in the bed (with respect to local density effects), and friction effects for materials of construction for dosators

Peat, pine stumps and people: interactions behind climate, vegetation change and human activity in wetland archaeology at Loch Farlary, Northern Scotland

First paragraph: In 1993, a peat-cutter, Bruce Field, working on the blanket peat bank he rented from the Sutherland Estate by Loch Farlary, above Golspie in Sutherland (fig 1), reported to Scottish Natural Heritage and Historic Scotland several pieces of pine wood bearing axe marks. Their depth in the peat suggested the cut marks to be prehistoric. This paper summarizes the work undertaken to understand the age and archaeological significance of this find (see also Tipping et al 2001 in press). The pine trees were initially thought to be part of a population that flourished briefly across northern Scotland in the middle of the Holocene period from c 4800 cal BP (Huntley, Daniell & Allen 1997). The subsequent collapse across northernmost Scotland of this population, the pine decline, at around 4200-4000 cal BP is unexplained: climate change has been widely assumed (Dubois & Ferguson 1985; Bridge, Haggart & Lowe 1990; Gear & Huntley 1991) but anthropogenic activity has not been disproved (Birks 1975; Bennett 1995). It was hypothesized that the Farlary find would allow for the first time the direct link between human woodland clearance and the Early Bronze Age pine decline.