Automatic code generation of overlapped communications in a parallelisation tool

This paper addresses the exploitation of overlapping communication with calculation within parallel FORTRAN 77 codes for computational fluid dynamics (CFD) and computational structured dynamics (CSD). The obvious objective is to overlap interprocessor communication with calculation on each processor in a distributed memory parallel system and so improve the efficiency of the parallel implementation. A general strategy for converting synchronous to overlapped communication is presented together with tools to enable its automatic implementation in FORTRAN 77 codes. This strategy is then implemented within the parallelisation toolkit, CAPTools, to facilitate the automatic generation of parallel code with overlapped communications. The success of these tools are demonstrated on two codes from the NAS-PAR and PERFECT benchmark suites. In each case, the tools produce parallel code with overlapped communications which is as good as that which could be generated manually. The parallel performance of the codes also improve in line with expectation.

SMARTFIRE: an integrated computational fluid dynamics code and expert system for fire field modelling

SMARTFIRE, an open architecture integrated CFD code and knowledge based system attempts to make fire field modeling accessible to non-experts in Computational Fluid Dynamics (CFD) such as fire fighters, architects and fire safety engineers. This is achieved by embedding expert knowledge into CFD software. This enables the 'black-art' associated with the CFD analysis such as selection of solvers, relaxation parameters, convergence criteria, time steps, grid and boundary condition specification to be guided by expert advice from the software. The user is however given the option of overriding these decisions, thus retaining ultimate control. SMARTFIRE also makes use of recent developments in CFD technology such as unstructured meshes and group solvers in order to make the CFD analysis more efficient. This paper describes the incorporation within SMARTFIRE of the expert fire modeling knowledge required for automatic problem setup and mesh generation as well as the concept and use of group solvers for automatic and manual dynamic control of the CFD code.

Collaborating components in mesh-based electronic packaging

From the model geometry creation to the model analysis, the stages in between such as mesh generation are the most manpower intensive phase in a mesh-based computational mechanics simulation process. On the other hand the model analysis is the most computing intensive phase. Advanced computational hardware and software have significantly reduced the computing time - and more importantly the trend is downward. With the kind of models envisaged coming, which are larger, more complex in geometry and modelling, and multiphysics, there is no clear trend that the manpower intensive phase is to decrease significantly in time - in the present way of operation it is more likely to increase with model complexity. In this paper we address this dilemma in collaborating components for models in electronic packaging application.

Automatic generation of portable multi-dimensionally decomposed parallel structured mesh software

Abstract not available

Automatic parallel code generation for message passing on distributed memory systems

The availability of a very accurate dependence graph for a scalar code is the basis for the automatic generation of an efficient parallel implementation. The strategy for this task which is encapsulated in a comprehensive data partitioning code generation algorithm is described. This algorithm involves the data partition, calculation of assignment ranges for partitioned arrays, addition of a comprehensive set of execution control masks, altering loop limits, addition and optimisation of communications for all data. In this context, the development and implementation of strategies to merge communications wherever possible has proved an important feature in producing efficient parallel implementations for numerical mesh based codes. The code generation strategies described here are embedded within the Computer Aided Parallelisation tools (CAPTools) software as a key part of a toolkit for automating as much as possible of the parallelisation process for mesh based numerical codes. The algorithms used enables parallelisation of real computational mechanics codes with only minor user interaction and without any prior manual customisation of the serial code to suit the parallelisation tool.

Computer aided parallelisation tools (CAPTools) — conceptual overview and performance on the parallelisation of structured mesh codes

Computer Aided Parallelisation Tools (CAPTools) is a toolkit designed to automate as much as possible of the process of parallelising scalar FORTRAN 77 codes. The toolkit combines a very powerful dependence analysis together with user supplied knowledge to build an extremely comprehensive and accurate dependence graph. The initial version has been targeted at structured mesh computational mechanics codes (eg. heat transfer, Computational Fluid Dynamics (CFD)) and the associated simple mesh decomposition paradigm is utilised in the automatic code partition, execution control mask generation and communication call insertion. In this, the first of a series of papers [1–3] the authors discuss the parallelisations of a number of case study codes showing how the various component tools may be used to develop a highly efficient parallel implementation in a few hours or days. The details of the parallelisation of the TEAMKE1 CFD code are described together with the results of three other numerical codes. The resulting parallel implementations are then tested on workstation clusters using PVM and an i860-based parallel system showing efficiencies well over 80%.

Integrating user knowledge with information from parallelisation tools to facilitate the automatic generation of efficient parallel FORTRAN code

User supplied knowledge and interaction is a vital component of a toolkit for producing high quality parallel implementations of scalar FORTRAN numerical code. In this paper we consider the necessary components that such a parallelisation toolkit should possess to provide an effective environment to identify, extract and embed user relevant user knowledge. We also examine to what extent these facilities are available in leading parallelisation tools; in particular we discuss how these issues have been addressed in the development of the user interface of the Computer Aided Parallelisation Tools (CAPTools). The CAPTools environment has been designed to enable user exploration, interaction and insertion of user knowledge to facilitate the automatic generation of very efficient parallel code. A key issue in the user's interaction is control of the volume of information so that the user is focused on only that which is needed. User control over the level and extent of information revealed at any phase is supplied using a wide variety of filters. Another issue is the way in which information is communicated. Dependence analysis and its resulting graphs involve a lot of sophisticated rather abstract concepts unlikely to be familiar to most users of parallelising tools. As such, considerable effort has been made to communicate with the user in terms that they will understand. These features, amongst others, and their use in the parallelisation process are described and their effectiveness discussed.

Automatic and effective multi-dimensional parallelisation of structured mesh based codes

The most common parallelisation strategy for many Computational Mechanics (CM) (typified by Computational Fluid Dynamics (CFD) applications) which use structured meshes, involves a 1D partition based upon slabs of cells. However, many CFD codes employ pipeline operations in their solution procedure. For parallelised versions of such codes to scale well they must employ two (or more) dimensional partitions. This paper describes an algorithmic approach to the multi-dimensional mesh partitioning in code parallelisation, its implementation in a toolkit for almost automatically transforming scalar codes to parallel form, and its testing on a range of ‘real-world’ FORTRAN codes. The concept of multi-dimensional partitioning is straightforward, but non-trivial to represent as a sufficiently generic algorithm so that it can be embedded in a code transformation tool. The results of the tests on fine real-world codes demonstrate clear improvements in parallel performance and scalability (over a 1D partition). This is matched by a huge reduction in the time required to develop the parallel versions when hand coded – from weeks/months down to hours/days.

Semi-automatic parallelisation of unstructured mesh codes

The availability of CFD software that can easily be used and produce high efficiency on a wide range of parallel computers is extremely limited. The investment and expertise required to parallelise a code can be enormous. In addition, the cost of supercomputers forces high utilisation to justify their purchase, requiring a wide range of software. To break this impasse, tools are urgently required to assist in the parallelisation process that dramatically reduce the parallelisation time but do not degrade the performance of the resulting parallel software. In this paper we discuss enhancements to the Computer Aided Parallelisation Tools (CAPTools) to assist in the parallelisation of complex unstructured mesh-based computational mechanics codes.

Converting best manual practice into generic automatable strategies for unstructured mesh parallelisation

The manual effort required to convert sequential computational mechanics programs into a useful, scalable parallel form is considerable. Tools that can assist in the conversion process are clearly required. Computer aided parallelisation tools (CAPTools) have been developed to generate efficient parallel code for real world structured grid application codes such as Computational Fluid Dynamics. Automatable single-program multi-data (SPMD) overlapping domain decomposition (DD) techniques established for structured grid codes have been adapted by the authors to manually parallelise unstructured mesh applications. Inspector loops have been used to provide generic techniques for the run-time support necessary to extend the capabilities of CAPTools to automatic implementation of SPMD DD techniques in the parallelisation of unstructured mesh codes. Copyright © 1999 John Wiley & Sons, Ltd.

An automatable generic strategy for dynamic load balancing in parallel structured mesh CFD codes

Parallel computing is now widely used in numerical simulation, particularly for application codes based on finite difference and finite element methods. A popular and successful technique employed to parallelize such codes onto large distributed memory systems is to partition the mesh into sub-domains that are then allocated to processors. The code then executes in parallel, using the SPMD methodology, with message passing for inter-processor interactions. In order to improve the parallel efficiency of an imbalanced structured mesh CFD code, a new dynamic load balancing (DLB) strategy has been developed in which the processor partition range limits of just one of the partitioned dimensions uses non-coincidental limits, as opposed to coincidental limits. The ‘local’ partition limit change allows greater flexibility in obtaining a balanced load distribution, as the workload increase, or decrease, on a processor is no longer restricted by the ‘global’ (coincidental) limit change. The automatic implementation of this generic DLB strategy within an existing parallel code is presented in this chapter, along with some preliminary results.

Multilevel mesh partitioning for heterogeneous communication networks

Multilevel algorithms are a successful class of optimisation techniques which address the mesh partitioning problem for distributing unstructured meshes onto parallel computers. They usually combine a graph contraction algorithm together with a local optimisation method which refines the partition at each graph level. To date these algorithms have been used almost exclusively to minimise the cut edge weight in the graph with the aim of minimising the parallel communication overhead, but recently there has been a perceived need to take into account the communications network of the parallel machine. For example the increasing use of SMP clusters (systems of multiprocessor compute nodes with very fast intra-node communications but relatively slow inter-node networks) suggest the use of hierarchical network models. Indeed this requirement is exacerbated in the early experiments with meta-computers (multiple supercomputers combined together, in extreme cases over inter-continental networks). In this paper therefore, we modify a multilevel algorithm in order to minimise a cost function based on a model of the communications network. Several network models and variants of the algorithm are tested and we establish that it is possible to successfully guide the optimisation to reflect the chosen architecture.

Three-dimensional free surface modelling in an unstructured mesh environment for metal processing applications

In the casting of metals, tundish flow, welding, converters, and other metal processing applications, the behaviour of the fluid surface is important. In aluminium alloys, for example, oxides formed on the surface may be drawn into the body of the melt where they act as faults in the solidified product affecting cast quality. For this reason, accurate description of wave behaviour, air entrapment, and other effects need to be modelled, in the presence of heat transfer and possibly phase change. The authors have developed a single-phase algorithm for modelling this problem. The Scalar Equation Algorithm (SEA) (see Refs. 1 and 2), enables the transport of the property discontinuity representing the free surface through a fixed grid. An extension of this method to unstructured mesh codes is presented here, together with validation. The new method employs a TVD flux limiter in conjunction with a ray-tracing algorithm, to ensure a sharp bound interface. Applications of the method are in the filling and emptying of mould cavities, with heat transfer and phase change.

Automatic implementation of dynamic load balancing strategies for structured computational mechanics codes

This paper presents a new dynamic load balancing technique for structured mesh computational mechanics codes in which the processor partition range limits of just one of the partitioned dimensions uses non-coincidental limits, as opposed to using coincidental limits in all of the partitioned dimensions. The partition range limits are 'staggered', allowing greater flexibility in obtaining a balanced load distribution in comparison to when the limits are changed 'globally'. as the load increase/decrease on one processor no longer restricts the load decrease/increase on a neighbouring processor. The automatic implementation of this 'staggered' load balancing strategy within an existing parallel code is presented in this paper, along with some preliminary results.