Laser Doppler velocimetry measurements of particle velocity profiles in gas-solid two-phase flows

The measurement of particle velocities in two-phase gas-solid systems has a wide application in flow monitoring in process plant, where two-phase gas-solids systems are frequently employed in the form of pneumatic conveyors and solid fuel injection systems. Such measurements have proved to be difficult to make reliably in industrial environments. This paper details particle velocity measurements made in a two phase gas-solid now utilising a laser Doppler velocimetry system. Tests were carried out using both wheat flour and pulverised coal as the solids phase, with air being used as the gaseous phase throughout. A pipeline of circular section, having a diameter of 53 mm was used for the test work, with air velocities ranging from 25 to 45 m/s and suspension densities ranging from 0.001 kg to 1 kg of solids per cubic meter of air. Details of both the test equipment used, and the results of the measurements are presented.

Heat and mass transfer in two-phase porous materials under intensive microwave heating

Computational results for the intensive microwave heating of porous materials are presented in this work. A multi-phase porous media model has been developed to predict the heating mechanism. Combined finite difference time-domain and finite volume methods were used to solve equations that describe the electromagnetic field and heat and mass transfer in porous media. The coupling between the two schemes is through a change in dielectric properties which were assumed to be dependent both on temperature and moisture content. The model was able to reflect the evolution of both temperature and moisture fields as well as energy penetration as the moisture in the porous medium evaporates. Moisture movement results from internal pressure gradients produced by the internal heating and phase change.

A new computational approach to microwave heating of two-phase porous materials

Computational results for the microwave heating of a porous material are presented in this paper. Combined finite difference time domain and finite volume methods were used to solve equations that describe the electromagnetic field and heat and mass transfer in porous media. The coupling between the two schemes is through a change in dielectric properties which were assumed to be dependent on both temperature and moisture content. The model was able to reflect the evolution of both temperature and moisture fields as well as energy penetration as the moisture in the porous medium evaporates. Moisture movement results from internal pressure gradients produced by the internal heating and phase change.

In vitro-in vivo correlations of self-emulsifying drug delivery systems combining the dynamic lipolysis model and neuro-fuzzy networks

The aim of the current study was to evaluate the potential of the dynamic lipolysis model to simulate the absorption of a poorly soluble model drug compound, probucol, from three lipid-based formulations and to predict the in vitro-in vivo correlation (IVIVC) using neuro-fuzzy networks. An oil solution and two self-micro and nano-emulsifying drug delivery systems were tested in the lipolysis model. The release of probucol to the aqueous (micellar) phase was monitored during the progress of lipolysis. These release profiles compared with plasma profiles obtained in a previous bioavailability study conducted in mini-pigs at the same conditions. The release rate and extent of release from the oil formulation were found to be significantly lower than from SMEDDS and SNEDDS. The rank order of probucol released (SMEDDS approximately SNEDDS > oil formulation) was similar to the rank order of bioavailability from the in vivo study. The employed neuro-fuzzy model (AFM-IVIVC) achieved significantly high prediction ability for different data formations (correlation greater than 0.91 and prediction error close to zero), without employing complex configurations. These preliminary results suggest that the dynamic lipolysis model combined with the AFM-IVIVC can be a useful tool in the prediction of the in vivo behavior of lipid-based formulations.

The development of a CFD based simulator for water mist suppression systems: the development of the fire submodel

The FIRE Detection and Suppression Simulation (FIREDASS) project was concerned with the development of water misting systems as a possible replacement for halon based fire suppression systems currently used in aircraft cargo holds and ship engine rooms. As part of this program of work, a computational model was developed to assist engineers optimize the design of water mist suppression systems. The model is based on Computational Fluid Dynamics (CFD) and comprised of the following components: fire model; mist model; two-phase radiation model; suppression model; detector/activation model. In this paper the FIREDASS software package is described and the theory behind the fire and radiation sub-models is detailed. The fire model uses prescribed release rates for heat and gaseous combustion products to represent the fire load. Typical release rates have been determined through experimentation. The radiation model is a six-flux model coupled to the gas (and mist) phase. As part of the FIREDASS project, a detailed series of fire experiments were conducted in order to validate the fire model. Model predictions are compared with data from these experiments and good agreement is found.

Solid phase velocity measurements utilising electrostatic sensors and cross correlation signal processing

Gas-solids two phase systems are widely employed within process plant in the form of pneumatic conveyors, dust extraction systems and solid fuel injection systems. The measurement of solids phase velocity therefore has wide potential application in flow monitoring and, in conjunction with density measurement instrumentation, solids mass flow rate measurement. Historically, a number of authors have detailed possible measurement techniques, and some have published limited test results. It is, however, apparent that none of these technologies have found wide application in industry. Solids phase velocity measurements were undertaken using real time cross correlation of signals from two electrostatic sensors spaced axially along a pipeline conveying pulverised coal (PF). Details of the measurement equipment, the pilot scale test rig and the test results are presented.

Characterising noise signals in 2-phase solid gas flows

Pneumatic conveying of powder and granular material involve the mixed flow of solid particles in air. Characterisation of solid/gas flow regimes is important for the design, operation and control of plants involving such two-phase processes. This paper describes preliminary studies directed at identifying flow regimes in solid/gas flows by analysis of the process `noise' signals from a flow transmitter which has a relatively wide frequency response.

The FIREDASS (Fire Detection and Suppression Simulation) Model

The FIREDASS (FIRE Detection And Suppression Simulation) project is concerned with the development of fine water mist systems as a possible replacement for the halon fire suppression system currently used in aircraft cargo holds. The project is funded by the European Commission, under the BRITE EURAM programme. The FIREDASS consortium is made up of a combination of Industrial, Academic, Research and Regulatory partners. As part of this programme of work, a computational model has been developed to help engineers optimise the design of the water mist suppression system. This computational model is based on Computational Fluid Dynamics (CFD) and is composed of the following components: fire model; mist model; two-phase radiation model; suppression model and detector/activation model. The fire model - developed by the University of Greenwich - uses prescribed release rates for heat and gaseous combustion products to represent the fire load. Typical release rates have been determined through experimentation conducted by SINTEF. The mist model - developed by the University of Greenwich - is a Lagrangian particle tracking procedure that is fully coupled to both the gas phase and the radiation field. The radiation model - developed by the National Technical University of Athens - is described using a six-flux radiation model. The suppression model - developed by SINTEF and the University of Greenwich - is based on an extinguishment crietrion that relies on oxygen concentration and temperature. The detector/ activation model - developed by Cerberus - allows the configuration of many different detector and mist configurations to be tested within the computational model. These sub-models have been integrated by the University of Greenwich into the FIREDASS software package. The model has been validated using data from the SINTEF/GEC test campaigns and it has been found that the computational model gives good agreement with these experimental results. The best agreement is obtained at the ceiling which is where the detectors and misting nozzles would be located in a real system. In this paper the model is briefly described and some results from the validation of the fire and mist model are presented.

Modelling metal powder production by the gas atomisation process

Metal powder in the range of 10-100 microns is widely employed in the production of Raney nickel type catalysts for hydrogenation reactions and hydrogen fuel cell manufacture. In this presentation we examine the modelling of powder production in a gas atomisation vessel using CFD techniques. In a fully coupled Lagrangian-Eulerian two phase scheme, liquid meal particles are tracked through the vessel following atomisation of a liquid nickel-aluminium stream. There is full momentum, heat and turbulence transport between particles and surrounding argon gas and the model predicts the position of solidification depending on particle size and undercooled condition. Maps of collision probability of particles at different stages of solidification are computed, to predict the creation of satellite defects, or to initiate solidification of undercooled droplets. The model is used to support experimental work conducted under the ESA/EU project IMPRESS.

What students can tell about lecturers when they are teaching: manifestations of confident and under-confident lecturers

Delivering a lecture requires confidence, a sound knowledge and well developed teaching skills (Cooper and Simonds, 2007, Quinn and Hughes, 2007). However, practitioners who are new to lecturing large groups in higher education may initially lack the confidence to do so which can manifest itself in their verbal and non-verbal cues and the fluency of their teaching skills. This results in the perception that students can identify the confident and non-confident teacher during a lecture (Street, 2007) and so potentially contributing to a lecturer’s level of anxiety prior to, and during, a lecture. Therefore, in the current educational climate of consumerisation, with the increased evaluation of teaching by students, having the ability to deliver high-quality, informed, and interesting lectures assumes greater significance for both lecturers and universities (Carr, 2007; Higher Education Founding Council 2008, Glass et al., 2006). This paper will present both the quantitative and qualitative data from a two-phase mixed method study with 75 nurse lecturers and 62 nursing students in one university in the United Kingdom. The study investigated the notion that lecturing has similarities to acting (Street, 2007). The findings presented here are concerned with how students perceived lecturers’ level of confidence and how lecturers believed they demonstrated confidence. In phase one a specifically designed questionnaire was distributed to both lecturers and students and a response rate of 91% (n=125) was achieved, while in phase two 12 in-depth semi-structured interviews were conducted with lecturers. Results suggested that students in a lecture could identify if the lecturer was confident or not by the way they performed a lecture. Students identified 57 manifestations of non-confidence and lecturers identified 85, while 57 manifestations of confidence were identified by students and 88 by lecturers. Overall, these fell into 12 main converse categories, ranging from body language to the use of space within the room. Both students and lecturers ranked body language, vocal qualities, delivery skills, involving the students and the ability to share knowledge as the most evident manifestations of confidence. Elements like good eye contact, smiling, speaking clearly and being fluent in the use of media recourses where all seen as manifestations confidence, conversely if these were poorly executed then a presentation of under confidence was evident. Furthermore, if the lecturer appeared enthusiastic it was clearly underpinned by the manifestation of a highly confidence lecturer who was secure in their knowledge base and teaching abilities: Some lecturers do appear enthusiastic but others don’t. I think the ones that do know what they are talking about, you can see it in their voice and in their lively body language. I think they are also good at involving the students even. I think the good ones are able to turn boring subjects into lively and interesting ones. (Student 50) Significantly more lecturers than students felt the lecturer should appear confident when lecturing. The lecturers stated it was particularly important to do so when they did not feel confident, because they were concerned with appearing capable. It seems that these students and lecturers perceived that expressive and apparently confident lecturers can make a positive impact on student groups in terms of involvement in lectures; the data also suggested the reverse, for the under confident lecturer. Findings from phase two indicated that these lecturers assumed a persona when lecturing, particularly, but not exclusively, when they were nervous. These lecturers went through a process of assuming and maintaining this persona before and during a lecture as a way of promoting their internal perceptions of confidence but also their outward manifestation of confidence. Although assuming a convincing persona may have a degree of deception about it, providing the knowledge communicated is accurate, the deception may aid rather than hinder learning, because enhances the delivery of a lecture. Therefore, the deception of acting a little more confidently than one feels might be justified when the lecturer knows the knowledge they are communicating is correct, unlike the Dr Fox Effect where the person delivering a lecture is an actor and does not know the subject in any detail or depth and where the deception to be justified (Naftulin, et al., 1973). In conclusion, these students and lecturers perceive that confident and enthusiastic lecturers communicate their passion for the subject in an interesting and meaningful manner through the use of their voice, body, space and interactions in such a way that shows confidence in their knowledge as well as their teaching abilities. If lecturers, therefore, can take a step back to consider how they deliver lectures in apparently confident ways this may increase their ability to engage their students and not only help them being perceived as good lecturers, but also contribute to the genuine act of education.

Measurement of pressure profiles in pneumatic conveying pipelines

Accurate design of two-phase air-solid pipelines requires data from flow and pressure measurements, requiring the appropriate positioning and selection of sensors as well as judicious processing of signals. This paper shows how detailed measurements of pressure profiles have been obtained for use in design of improved pneumatic conveying pipelines.