Extending the capabilities of the buildingEXODUS evacuation model to cater for hospital evacuations

This paper describes the extension of the building EXODUS evacuation model in order to: allow occupants to be assigned a limited set of tasks, display co-operation

The M/M/1 queue with mass exodus and mass arrivals when empty

An M/M/1 queue is subject to mass exodus at rate β and mass immigration at rate {αr; r≥ 1} when idle. A general resolvent approach is used to derive occupation probabilities and high-order moments. This powerful technique is not only considerably easier to apply than a standard direct attack on the forward p.g.f. equation, but it also implicitly yields necessary and sufficient conditions for recurrence, positive recurrence and transience.

Group technology approach to the open shop scheduling problem with batch setup times

This paper studies the problem of scheduling jobs in a two-machine open shop to minimize the makespan. Jobs are grouped into batches and are processed without preemption. A batch setup time on each machine is required before the first job is processed, and when a machine switches from processing a job in some batch to a job of another batch. For this NP-hard problem, we propose a linear-time heuristic algorithm that creates a group technology schedule, in which no batch is split into sub-batches. We demonstrate that our heuristic is a -approximation algorithm. Moreover, we show that no group technology algorithm can guarantee a worst-case performance ratio less than 5/4.

Modelling induction skull melting design modifications

Induction Skull Melting (ISM) is a technique for heating, melting, mixing and, possibly, evaporating reactive liquid metals at high temperatures with a minimum contact at solid walls. The presented numerical modelling involves the complete time dependent process analysis based on the coupled electromagnetic, temperature and turbulent velocity fields during the melting and liquid shape changes. The simulation model is validated against measurements of liquid metal height, temperature and heat losses in a commercial size ISM furnace. The observed typical limiting temperature plateau for increasing input electrical power is explained by the turbulent convective heat losses. Various methods to increase the superheat within the liquid melt, the process energy efficiency and stability are proposed.

An analysis of human behaviour during the WTC disaster of 9/11 based on published survivor accounts

This paper presents an analysis of survivor experiences from the World Trade Centre (WTC) evacuation of 11 September 2001. The experiences were collected from published accounts appearing in the print and electronic mass media and are stored in a relational database specifically developed for this purpose.

Projecting the prison: the depiction of the uncanny in The Shawshank Redemption

The space of the prison is no longer on the margins in relation to societal `centres', but instead acts as an adjunct to the urban environment. With the disappearance of the Gothic prison from the archi-texture of contemporary cities, the meaning conveyed by its façade has lost much of its potency. It is now contemporary prison drama, as opposed to the physical façade, that represents the interface between the public and the prison. This article explores a dramatic representation of the prison (The Shawshank Redemption) through the lens of Freud's (1919/1955) notion of the uncanny and Bachelard's (1958/1994) poetics of domestic space. Incarceration, as depicted in film and television, reinforces the `place myths' of the prison (Shields, 1991). Contemporary prison drama portrays the prison as a marginal space in much the way that the Gothic façades of the 19th-century prison projected a particular message. The prison, as depicted on screen, is a simulacrum. It is a facsimile of an architectural idea that only ever existed as a façade - a façade that occluded as much as it projected.

Practical solvent system selection for counter-current separation of pharmaceutical compounds

Counter-current chromatography (CCC) is a technique that shows a lot of potential for large scale purification. Its usefulness in a "research and development" pharmaceutical environment has been investigated, and the conclusions are shown in this article. The use of CCC requires the development of an appropriate solvent system (a parameter of critical importance), a process which can be tedious. This article presents a novel strategy, combining a statistical approach and fast HPLC to generate a three-dimensional partition coefficient map and rapidly predict an optimal solvent system. This screen is performed in half a day and involves 9 experiments per solvent mixture. Test separations were performed using that screen to ensure the validity of the method.

Elemental analysis of soil samples for forensic purposes by inductively coupled plasma spectrometry - precision considerations

Major and trace elemental composition provides a powerful basis for forensic comparison of soils, sediments and rocks. However, it is important that the potential 'errors' associated with the procedures are fully understood and quantified, and that standard protocols are applied for sample preparation and analysis. This paper describes such a standard procedure and reports results both for instrumental measurement precision (repeatability) and overall 'method' precision (reproducibility). Results obtained both for certified reference materials and example soils show that the instrumental measurement precision (defined by the coefficient of variation, CV) for most elements is better than 2-3%. When different solutions were prepared from the same sample powder, and from different sub-sample powders prepared from the same parent sample, the CV increased to c. 5-6% for many elements. The largest variation was found in results for certified reference materials generated from 23 instrument runs over an 18 month period (mean CV=c. 11%). Some elements were more variable than others. W was found to be the most variable and the elements V, Cr, Co, Cu, Ni and Pb also showed higher than average variability. SiO2, CaO, Al2O3 and Fe2O3, Rb, Sr, La, Ce, Nd and Sm generally showed lower than average variability, and therefore provided the most reliable basis for inter-sample comparison. It is recommended that, whenever possible, samples relating to the same investigation should be analysed in the same sample run, or at least sequential runs.

The missing link between information and action: hastenings and delays as universal reactions to performance feedback

This chapter focuses on what the key decision makers in organizations decide after having received information on the current state of the organizational performance. Because of strong attributions to success and failure, it is impossible to predict in advance which concrete actions will occur. We can however find out what kinds of actions are decided upon by means of an organizational learning model that focuses on the hastenings and delays after performance feedback. As an illustration, the responses to performance signals by trainers and club owners in Dutch soccer clubs are analyzed.

University education as a public service

There is no tradition of public service in large parts of English higher education. This is because historically HE in England has seen itself as independent of the state and unaccountable to the public for its twin roles of research and teaching. These serve its own interests conceived as advancing knowledge and ensuring the continued transmission of that knowledge to future generations. The dominance of this conception explains the so-called ‘academic community’s’ Gaderene rush to abandon free HE in England. Resistance to preserve and extend public service HE will therefore predictably come mainly from former-local authority further and higher education institutions.