A systematic comparison of buildingEXODUS predictions with experimental data from the Stapelfeldt trials and the Milburn House evacuation

In this paper, the buildingEXODUS evacuation model is described and discussed and attempts at qualitative and quantitative model validation are presented. The data sets used for validation are the Stapelfeldt and Milburn House evacuation data. As part of the validation exercise, the sensitivity of the building-EXODUS predictions to a range of variables is examined, including occupant drive, occupant location, exit flow capacity, exit size, occupant response times and geometry definition. An important consideration that has been highlighted by this work is that any validation exercise must be scrutinised to identify both the results generated and the considerations and assumptions on which they are based. During the course of the validation exercise, both data sets were found to be less than ideal for the purpose of validating complex evacuation. However, the buildingEXODUS evacuation model was found to be able to produce reasonable qualitative and quantitative agreement with the experimental data.

Pre-emptive scheduling problems with controllable processing times

We consider a range of single machine and identical parallel machine pre-emptive scheduling models with controllable processing times. For each model we study a single criterion problem to minimize the compression cost of the processing times subject to the constraint that all due dates should be met. We demonstrate that each single criterion problem can be formulated in terms of minimizing a linear function over a polymatroid, and this justifies the greedy approach to its solution. A unified technique allows us to develop fast algorithms for solving both single criterion problems and bicriteria counterparts.

Wetting and Reaction of Sn-2.8Ag-0.5Cu-1.0Bi Solder with Cu and Ni Substrates

The wettability of newly developed Sn-2.8Ag-0.5Cu-1.0Bi lead-free solder on Cu and Ni substrates was assessed through the wetting balance tests. The wettability assessment parameters such as contact angle (ϑc) and maximum wetting force (Fw) were documented for three solder bath temperatures with three commercial fluxes, namely, no-clean (NC), nonactivated (R), and water-soluble organic acid flux (WS). It was found that the lead-free Sn-2.8Ag-0.5Cu-1.0Bi solder exhibited less wetting force, i.e., poorer wettability, than the conventional Sn-37Pb solder for all flux types and solder bath temperatures. The wettability of Sn-2.8Ag-0.5Cu-1.0Bi lead-free solder on Cu substrate was much higher than that on Ni substrate. Nonwetting for Sn-2.8Ag-0.5Cu-1.0Bi and Sn-Pb solders on Ni substrate occurred when R-type flux was used. A model was built and simulations were performed for the wetting balance test. The simulation results were found very close to the experimental results. It was also observed that larger values of immersion depth resulted in a decrease of the wetting force and corresponding meniscus height, whereas the increase in substrate perimeter enhanced the wettability. The wetting reactions between the solder and Cu/Ni substrates were also investigated, and it was found that Cu atoms diffused into the solder through the intermetallic compounds (IMCs) much faster than did the Ni atoms. Rapid formation of IMCs inhibited the wettability of Sn-2.8Ag-0.5Cu-1.0Bi solder compared to the Sn-Pb solder.

Accelerated carbonation treatment of industrial wastes

The disposal of industrial waste presents major logistical, financial and environmental issues. Technologies that can reduce the hazardous properties of wastes are urgently required. In the present work, a number of industrial wastes arising from the cement, metallurgical, paper, waste disposal and energy industries were treated with accelerated carbonation. In this process carbonation was effected by exposing the waste to pure carbon dioxide gas. The paper and cement wastes chemically combined with up to 25% by weight of gas. The reactivity of the wastes to carbon dioxide was controlled by their constituent minerals, and not by their elemental composition, as previously postulated. Similarly, microstructural alteration upon carbonation was primarily influenced by mineralogy. Many of the thermal wastes tested were classified as hazardous, based upon regulated metal content and pH. Treatment by accelerated carbonation reduced the leaching of certain metals, aiding the disposal of many as stable non-reactive wastes. Significant volumes of carbon dioxide were sequestrated into the accelerated carbonated treated wastes.

Age and gender influences on sensory perceptions of novel low cost nutrient-rich food products developed using traditional Ghanaian food ingredients

Background: A number of factors are known to influence food preferences and acceptability of new products. These include their sensory characteristics and strong, innate neural influences. In designing foods for any target group, it is important to consider intrinsic and extrinsic characteristics which may contribute to palatability, and acceptability of foods. Objective: To assess age and gender influences on sensory perceptions of novel low cost nutrient-rich food products developed using traditional Ghanaian food ingredients. Materials and Methods: In this study, a range of food products were developed from Ghanaian traditional food sources using the Food Multimix (FMM) concept. These products were subjected to sensory evaluation to assess the role of sensory perception on their acceptability among different target age groups across the life cycle (aged 11-68 years olds) and to ascertain any possible influences of gender on preference and choice. Variables including taste, odour, texture, flavour and appearance were tested and the results captured on a Likert scale and scores of likeness and acceptability analysed. Multivariate analyses were used to develop prediction models for targeted recipe development for different target groups. Multiple factor analysis of variance (ANOVA) and logistic linear regression were employed to test the strength of acceptability and to ascertain age and gender influences on product preference. Results: The results showed a positive trend in acceptability (r = 0.602) which tended towards statistical significance (p = 0.065) with very high product favourability rating (91% acceptability; P=0.005). However, age [odds ratios=1.44 (11-15 years old) odds ratios=2.01 (18-68 years old) and gender (P=0.000)] were major influences on product preference with children and females (irrespective of age) showing clear preferences or dislike of products containing certain particular ingredients. Conclusion: These findings are potentially useful in planning recipes for feeding interventions involving different vulnerable and target groups.

The biocompatibility of resin-modified glass-ionomer cements for dentistry

OBJECTIVES: The biological effects of resin-modified glass-ionomer cements as used in clinical dentistry are described, and the literature reviewed on this topic. METHODS: Information on resin-modified glass-ionomers and on 2-hydroxyethyl methacrylate (HEMA), the most damaging substance released by these materials, has been collected from over 50 published papers. These were mainly identified through Scopus. RESULTS: HEMA is known to be released from these materials and has a variety of damaging biological properties, ranging from pulpal inflammation to allergic contact dermatitis. These are therefore potential hazards from resin-modified glass-ionomers. However, clinical results with these materials that have been reported to date are generally positive. CONCLUSIONS/SIGNIFICANCE: Resin-modified glass-ionomers cannot be considered biocompatible to nearly the same extent as conventional glass-ionomers. Care needs to be taken with regard to their use in dentistry and, in particular, dental personnel may be at risk from adverse effects such as contact dermatitis and other immunological responses.

Adult personality inconsistency and problems with parents: uncovering the roots of the false self

Research has established that individuals who tend to vary their personality depending on who they are with, show a variety of signs of psychological maladjustment in comparison to those who do not; they show more negative affect (Baird, Le and Lucas, 2006), lower life satisfaction (Suh, 2002), lower self-esteem (Sheldon et al., 1997), lower role-satisfaction (Donahue et al., 1993), higher rates of depression (Lutz and Ross, 2003), more anxiety (Diehl, Hastings and Stanton, 2001) and poorer physical health (Cross, Gore and Morris, 2003). It has also been shown that personality variability is positively related to the experience of inauthenticity and falsity (Sheldon et al., 1997). Donahue, Roberts, Robins and John (1993) found that personality inconsistency of this type is related to tension within the family. Psychoanalytic theory has also linked the operation of an adult false self to experiences with parents, particularly in early life (Winnicott, 1960). It was hypothesized that personality variability and the adult experience of falsity in social situations would be related to an emotionally unstable relationship with parents. The method to test this comprised a questionnaire-based survey given to a non-clinical population. The final sample comprised 305, with 193 women and 112 men, aged from 19 to 55. The first questionnaire asked participants to rate personality traits, including emotional stability, in three social contexts - with parents, with friends and with work colleagues. The second part involved 3 questions; participants were asked to select in which of the aforementioned three social contexts they felt “most themselves”; in which they were “most authentic” and in which they “put on a front”. It was found, consistent with predictions, that an index of overall personality variability calculated from the personality questionnaire correlated strongly with emotional instability around parents (r = 0.46, p<0.001), while not correlating with emotional instability in either of the other two contexts measured. This suggests a specific link between a person’s relationship with their parents and their overall personality integration. Furthermore, it was found that participants who cited one of the three social contexts (parents, friends, work colleagues) as being one in which they were “more themselves” or “more authentic” had significantly higher ratings of emotional instability with parents than those participants who found that they were equally authentic across settings (F = 9.8, p<0.005). The results suggest a clear link between a person’s relationships with their parents and their adult personality integration. An explanation is that individuals who experience an anxious or ambiguous attachment with their parents in childhood may fear rejection or abandonment in later life, and so habitually adapt their personality to fit in to social contexts as adults, in order to be accepted by others and to minimize the possibility of social rejection. These individuals meanwhile retain an emotionally unstable relationship with their parents in adulthood. This interpretation is speculative but is open to empirical testing. Clinicians should be aware that attachment problems with parents may underlie poor personality integration in adulthood.

Considering theories of aggression in an emergency department context

Internationally literature emphasises concern regarding the phenomenon of violence and aggression within the emergency field. This paper emphasises the important role education and training may play in reducing the risk of staff being exposed to violent or aggressive experiences. Furthermore, the paper emphasises, explores and discusses well recognised theories relating to aggression development. These theories can be used to explain both organisational strategies designed to minimise aggression in the emergency department and situational factors contributing to the development of aggressive interactions.