Private equity and employment - the Davos/WEF/Harvard study

The World Economic Forum at Davos has published a major study showing that workplaces of firms taken over by private equity have 10% less employees 5 years after the takeover, than other similar workplaces. The rate of plant closures, opening, acquisitions and disposals is twice as high as in other firms, and the net effect is still a job loss of 3.6%-4.5% after only 2 years, compared with other firms. Firms taken over by private equity are also more likely to go bankrupt than publicly quoted firms.

A greedy open shop heuristic with job priorities

The paper presents an improved version of the greedy open shop approximation algorithm with pre-ordering of jobs. It is shown that the algorithm compares favorably with the greedy algorithm with no pre-ordering by reducing either its absolute or relative error. In the case of three machines, the new algorithm creates a schedule with the makespan that is at most 3/2 times the optimal value.

Heuristics for short route job shop scheduling problems

We consider two “minimum”NP-hard job shop scheduling problems to minimize the makespan. In one of the problems every job has to be processed on at most two out of three available machines. In the other problem there are two machines, and a job may visit one of the machines twice. For each problem, we define a class of heuristic schedules in which certain subsets of operations are kept as blocks on the corresponding machines. We show that for each problem the value of the makespan of the best schedule in that class cannot be less than 3/2 times the optimal value, and present algorithms that guarantee a worst-case ratio of 3/2.

Numerical simulation of the mass loss process in pyrolizing char materials

We present here a decoupling technique to tackle the entanglement of the nonlinear boundary condition and the movement of the char/virgin front for a thermal pyrolysis model for charring materials. Standard numerical techniques to solve moving front problems — often referred to as Stefan problems — encounter difficulties when dealing with nonlinear boundaries. While special integral methods have been developed to solve this problem, they suffer from several limitations which the technique described here overcomes. The newly developed technique is compared with the exact analytical solutions for some simple ideal situations which demonstrate that the numerical method is capable of producing accurate numerical solutions. The pyrolysis model is also used to simulate the mass loss process from a white pine sample exposed to a constant radiative flux in a nitrogen atmosphere. Comparison with experimental results demonstrates that the predictions of mass loss rates and temperature profile within the solid material are in good agreement with the experiment.

Heuristics for the two-stage job shop scheduling problem with a bottleneck machine

The paper considers the job shop scheduling problem to minimize the makespan. It is assumed that each job consists of at most two operations, one of which is to be processed on one of m⩾2 machines, while the other operation must be performed on a single bottleneck machine, the same for all jobs. For this strongly NP-hard problem we present two heuristics with improved worst-case performance. One of them guarantees a worst-case performance ratio of 3/2. The other algorithm creates a schedule with the makespan that exceeds the largest machine workload by at most the length of the largest operation.

Scheduling batches with sequential job processing for two-machine flow and open shops

In this paper, we study a problem of scheduling and batching on two machines in a flow-shop and open-shop environment. Each machine processes operations in batches, and the processing time of a batch is the sum of the processing times of the operations in that batch. A setup time, which depends only on the machine, is required before a batch is processed on a machine, and all jobs in a batch remain at the machine until the entire batch is processed. The aim is to make batching and sequencing decisions, which specify a partition of the jobs into batches on each machine, and a processing order of the batches on each machine, respectively, so that the makespan is minimized. The flow-shop problem is shown to be strongly NP-hard. We demonstrate that there is an optimal solution with the same batches on the two machines; we refer to these as consistent batches. A heuristic is developed that selects the best schedule among several with one, two, or three consistent batches, and is shown to have a worst-case performance ratio of 4/3. For the open-shop, we show that the problem is NP-hard in the ordinary sense. By proving the existence of an optimal solution with one, two or three consistent batches, a close relationship is established with the problem of scheduling two or three identical parallel machines to minimize the makespan. This allows a pseudo-polynomial algorithm to be derived, and various heuristic methods to be suggested.

Scheduling batches with simultaneous job processing for two-machine shop problems

We consider the problem of scheduling independent jobs on two machines in an open shop, a job shop and a flow shop environment. Both machines are batching machines, which means that several operations can be combined into a batch and processed simultaneously on a machine. The batch processing time is the maximum processing time of operations in the batch, and all operations in a batch complete at the same time. Such a situation may occur, for instance, during the final testing stage of circuit board manufacturing, where burn-in operations are performed in ovens. We consider cases in which there is no restriction on the size of a batch on a machine, and in which a machine can process only a bounded number of operations in one batch. For most of the possible combinations of restrictions, we establish the complexity status of the problem.

Comparison between weight loss of bends in a pneumatic conveyor and erosion rate obtained in a centrifugal erosion tester for the same materials

In order to find a link between results obtained from a laboratory erosion tester and tests carried out on a pneumatic conveyor, a comparison has been made between weight loss from bends on an industrial-scale pneumatic conveyor and erosion rates obtained in a small centrifugal erosion tester, for the same materials. Identical test conditions have been applied to both experiments so that comparable test results have been obtained. The erosion rate of mild steel commonly used as the wall material of conveyor pipes and pipe bends was determined individually on both test rigs. A relationship between weight loss from the bends and erosion rate determined from the tester has been developed. A discussion based on the results and their applicability to the prediction of wear in pneumatic conveyors concludes the paper.

Preemptive scheduling on uniform parallel machines with controllable job processing times

In this paper, we provide a unified approach to solving preemptive scheduling problems with uniform parallel machines and controllable processing times. We demonstrate that a single criterion problem of minimizing total compression cost subject to the constraint that all due dates should be met can be formulated in terms of maximizing a linear function over a generalized polymatroid. This justifies applicability of the greedy approach and allows us to develop fast algorithms for solving the problem with arbitrary release and due dates as well as its special case with zero release dates and a common due date. For the bicriteria counterpart of the latter problem we develop an efficient algorithm that constructs the trade-off curve for minimizing the compression cost and the makespan.

Paying the price for loss of light

Considers the Court of Appeal ruling in Forsyth-Grant v Allen on the principles to be applied in assessing damages for the loss of light. Outlines the method for calculating damages for loss of right to light, the type of amenity which will be included in calculations for loss of amenity and the process applied in this case for assessing damages arising from the loss of profits that would have been made by the owner of the right to light if they had negotiated to relax the covenant, with reference to case law. Notes the limits to damages available for hypothetical loss and the difference between this award of profits and an account of profits.

Creative leadership & communities of practice

This Second Wave presentation focused on 'Creative Leadership and Communities of Practice', with particular reference to issues of trust affecting young people, unemployment and wider uncertainties in an economic recession when people were facing job cuts and in a social environment characterised by cynicism and a downturn in trust. Young people who join Second Wave are brought into a community of practice (CoP) (Lave and Wenger, 1991; Wenger, 1999) involving a dynamic, fluid process which is distinctive in its transformative power to change people's lives. The philosophy behind this involves Dewey's notion of the 'active self' (Dewey, 1916) and the theories of 'social constructivism' (Vygotsky, 1978). The process fosters trust, confidence and social learning (Bandura, 1977; Vygotsky, 1978) in which young people join in with a dialogue involving participation in the youth-centred creative space. The 'border zone' (Heath, 1994) in that creative space enables young people to connect with each other in the specialist field of youth arts. The youth-centred partnerships involved lead to greater confidence and development in a range of important artistic, social, cognitive and emotional skills and opportunities. Ultimately, the young person may become engaged in multi-agency working with Second Wave's external partners. Throughout all of these processes, young people are encouraged progressively to develop a more 'active self' to engage proactively with many different beneficial opportunities relating to the performing arts. In an era in which there has been a loss of trust in public life this is particularly important. If trust is defined in part as a belief in the honesty, competence and benevolence of others, it tends to act like 'social glue', cushioning difficult situations and enabling actions to take place easily that otherwise would not be permissible. The Edelman Trust Barometer for 2009 has recorded a marked diminution of trust in corporations, businesses and government, as a result of the credit crunch. While the US and parts of Europe were showing recovery from a generalised loss of trust by mid-year 2009, the UK had not. Social attitudes in Britain may be hardening - from being a nation of sceptics we may be becoming a nation of cynics: for example, only 13% of the population surveyed by Edelman trust politicians to tell the truth. In this situation, there is a need to promote positive measures to build trust. The presentation aims described key aspects of Second Wave's approach to identify and disseminate its model of good practice to make this more explicit and accessible to others. It is with awareness of the profoundly challenging circumstances facing young people, particularly but not exclusively in inner city urban areas such as Deptford, and the valuable contribution youth arts work can make to their well-being and development, that the presentation was carried out. In an era of generalised mistrust, the work done at Second Wave is crucial in empowering and supporting young people to find a positive and creative direction as part of the community.

The influence of alkali metal chlorides on the loss of water from glass-ionomer dental cements

The water loss behaviour of a clinical glass-ionomer dental cement has been studied with and without the addition of alkali metal chlorides. Dehydrating conditions were provided by placing specimens in a desiccator over concentrated sulphuric acid. Cements were prepared using either pure water or an aqueous solution of metal chloride (LiCl, NaCl, KCl) at 1.0 mol/dm(3). In addition, NaCl at 0.5 mol/dm(3) was also used to fabricate cements. Disc-shaped specimens of size 6 mm diameter x 2 mm thickness were made, six performulation, and cured at 37 degrees C for 1 hour They were then exposed to desiccating conditions, and the mass measured at regular intervals. All formulations were found to lose water in a diffusion process that equilibrated after approximately 3 weeks. Diffusion coefficients ranged from 2.27 (0.13) x 10(9) with no additive to 1.85 (0.07) x 10(9) m(2)/s with 1.0 mol/dm(3) KCl. For the salts, diffusion coefficients decreased in the order LiCl > NaCl > KCl. There was no statistically significant difference between the diffusion coefficients for 1.0 and 0.5 mol/dm(3) NaCl. For all salts at 1.0 mol/dm(3) and also additive-free cements, equilibrium losses were, with statistical limits, the same, ranging from 6.23 to 6.34%. On the other hand, 0.5 mol/dm(3) NaCl lost significantly more water 7.05%.

Kinetic studies of water uptake and loss in glass-ionomer cements

The water sorption and desorption behaviour of three commercial glass-ionomer cements used in clinical dentistry have been studied in detail. Cured specimens of each material were found to show slight but variable water uptake in high humidity conditions, but steady loss in desiccating ones. This water loss was found to follow Fick's law for the first 4-5 h. Diffusion coefficients at 22 degrees C were: Chemflex 1.34 x 10(-6) cm(2) s(-1), Fuji IX 5.87 x 10(-7) cm(2) s(-1), Aquacem 3.08 x 10(-6) cm(2) s(-1). At 7 degrees C they were: Chemflex 8.90 x 10(-7) cm(2) s(-1), Fuji IX 5.04 x 10(-7) cm(2) s(-1), Aquacem 2.88 x 10(-6) cm(2) s(-1). Activation energies for water loss were determined from the Arrhenius equation and were found to be Chemflex 161.8 J mol(-1), Fuji IX 101.3 J mol(-1), Aquacem 47.1 J mol(-1). Such low values show that water transport requires less energy in these cements than in resin-modified glass-ionomers. Fick's law plots were found not to pass through the origin. This implies that, in each case, there is a small water loss that does not involve diffusion. This was concluded to be water at the surface of the specimens, and was termed "superficial water". As such, it represents a fraction of the previously identified unbound (loose) water. Superficial water levels were: Chemflex 0.56%, Fuji IX 0.23%, Aquacem 0.87%. Equilibrium mass loss values were shown to be unaffected by temperature, and allowed ratios of bound:unbound water to be determined for all three cements. These showed wide variation, ranging from 1:5.26 for Chemflex to 1:1.25 for Fuji IX.

The kinetics of water loss from zinc phosphate and zinc polycarboxylate dental cements

The water desorption behaviour of three different zinc oxide dental cements (two polycarboxylates, one phosphate) has been studied in detail. Disc-shaped specimens of each material were prepared and allowed to lose water by being subjected to a low humidity desiccating atmosphere over concentrated sulfuric acid. In all three cements, water loss was found to follow Fick's second law for at least 6 h (until M(t)/M(infinity) values were around 0.5), with diffusion coefficients ranging from 6.03 x 10(-8 )cm(2 )s(-1) (for the zinc phosphate) to 2.056 x 10(-7 )cm(2 )s(-1) (for one of the zinc polycarboxylates, Poly F Plus). Equilibration times for desorption were of the order of 8 weeks, and equilibrium water losses ranged from 7.1% for zinc phosphate to 16.9% and 17.4% for the two zinc polycarboxylates.

A spiritual perspective on loss and bereavement

This article investigates the experience of loss and bereavement from the point of view of a spiritual perspective on the phenomenon. It also looks at the experience of holding a marginalized viewpoint within an academic and professional community and adopts an autoethnographic approach to the inquiry. Some conclusions are drawn from the study in terms of its implications for theory and professional life.