Individual Differences in the Neural Response to Personal Goal Pursuit Success and Failure: A Developmental Analysis

Regulatory focus theory (RFT) proposes two different social-cognitive motivational systems for goal pursuit: a promotion system, which is organized around strategic approach behaviors and "making good things happen," and a prevention system, which is organized around strategic avoidance and "keeping bad things from happening." The promotion and prevention systems have been extensively studied in behavioral paradigms, and RFT posits that prolonged perceived failure to make progress in pursuing promotion or prevention goals can lead to ineffective goal pursuit and chronic distress (Higgins, 1997).

Research has begun to focus on uncovering the neural correlates of the promotion and prevention systems in an attempt to differentiate them at the neurobiological level. Preliminary research suggests that the promotion and prevention systems have both distinct and overlapping neural correlates (Eddington, Dolcos, Cabeza, Krishnan, & Strauman, 2007; Strauman et al., 2013). However, little research has examined how individual differences in regulatory focus develop and manifest. The development of individual differences in regulatory focus is particularly salient during adolescence, a crucial topic to explore given the dramatic neurodevelopmental and psychosocial changes that take place during this time, especially with regard to self-regulatory abilities. A number of questions remain unexplored, including the potential for goal-related neural activation to be modulated by (a) perceived proximity to goal attainment, (b) individual differences in regulatory orientation, specifically general beliefs about one's success or failure in attaining the two kinds of goals, (c) age, with a particular focus on adolescence, and (d) homozygosity for the Met allele of the catechol-O-methyltransferase (COMT) Val158Met polymorphism, a naturally occurring genotype which has been shown to impact prefrontal cortex activation patterns associated with goal pursuit behaviors.

This study explored the neural correlates of the promotion and prevention systems through the use of a priming paradigm involving rapid, brief, masked presentation of individually selected promotion and prevention goals to each participant while being scanned. The goals used as priming stimuli varied with regard to whether participants reported that they were close to or far away from achieving them (i.e. a "match" versus a "mismatch" representing perceived success or failure in personal goal pursuit). The study also assessed participants' overall beliefs regarding their relative success or failure in attaining promotion and prevention goals, and all participants were genotyped for the COMT Val158Met polymorphism.

A number of significant findings emerged. Both promotion and prevention priming were associated with activation in regions associated with self-referential cognition, including the left medial prefrontal cortex, cuneus, and lingual gyrus. Promotion and prevention priming were also associated with distinct patterns of neural activation; specifically, left middle temporal gyrus activation was found to be significantly greater during prevention priming. Activation in response to promotion and prevention goals was found to be modulated by self-reports of both perceived proximity to goal achievement and goal orientation. Age also had a significant effect on activation, such that activation in response to goal priming became more robust in the prefrontal cortex and in default mode network regions as a function of increasing age. Finally, COMT genotype also modulated the neural response to goal priming both alone and through interactions with regulatory focus and age. Overall, these findings provide further clarification of the neural underpinnings of the promotion and prevention systems as well as provide information about the role of development and individual differences at the personality and genetic level on activity in these neural systems.

The impact of gestational age and fetal weight on the risk of failure of spinal anesthesia for cesarean delivery.

BACKGROUND: There are limited data about spinal dosing for cesarean delivery in preterm parturients. We investigated the hypothesis that preterm gestation is associated with an increased incidence of inadequate spinal anesthesia for cesarean delivery compared with term gestation. METHODS: We searched our perioperative database for women who underwent cesarean delivery under spinal or combined spinal-epidural anesthesia with hyperbaric bupivacaine ⩾10.5mg. The primary outcome was the incidence of inadequate surgical anesthesia needing conversion to general anesthesia or repetition or supplementation of the block. We divided patients into four categories: <28, 28 to <32, 32 to <37 and ⩾37weeks of gestation. The chi-square test was used to compare failure rates and a multivariable regression analysis was performed to investigate potential confounders of the relationship between gestational age and failure. RESULTS: A total of 5015 patients (3387 term and 1628 preterm) were included. There were 278 failures (5.5%). The incidence of failure was higher in preterm versus term patients (6.4% vs. 5.1%, P=0.02). Failure rates were 10.8%, 7.7%, 5.3% and 5% for <28, 28 to <32, 32 to <37 and ⩾37weeks of gestation, respectively. In the multivariable model, low birth weight (P<0.0001), gestational age (P=0.03), ethnicity (P=0.02) and use of combined spinal-epidural anesthesia (P<0.0001) were significantly associated with failure. CONCLUSIONS: At standard spinal doses of hyperbaric bupivacaine used in our practice (⩾10.5mg), there were higher odds of inadequate surgical anesthesia in preterm parturients. When adjusting for potential confounders, low birth weight was the main factor associated with failure.

Scientific writing: a randomized controlled trial comparing standard and on-line instruction.

BACKGROUND: Writing plays a central role in the communication of scientific ideas and is therefore a key aspect in researcher education, ultimately determining the success and long-term sustainability of their careers. Despite the growing popularity of e-learning, we are not aware of any existing study comparing on-line vs. traditional classroom-based methods for teaching scientific writing. METHODS: Forty eight participants from a medical, nursing and physiotherapy background from US and Brazil were randomly assigned to two groups (n = 24 per group): An on-line writing workshop group (on-line group), in which participants used virtual communication, google docs and standard writing templates, and a standard writing guidance training (standard group) where participants received standard instruction without the aid of virtual communication and writing templates. Two outcomes, manuscript quality was assessed using the scores obtained in Six subgroup analysis scale as the primary outcome measure, and satisfaction scores with Likert scale were evaluated. To control for observer variability, inter-observer reliability was assessed using Fleiss's kappa. A post-hoc analysis comparing rates of communication between mentors and participants was performed. Nonparametric tests were used to assess intervention efficacy. RESULTS: Excellent inter-observer reliability among three reviewers was found, with an Intraclass Correlation Coefficient (ICC) agreement = 0.931882 and ICC consistency = 0.932485. On-line group had better overall manuscript quality (p = 0.0017, SSQSavg score 75.3 +/- 14.21, ranging from 37 to 94) compared to the standard group (47.27 +/- 14.64, ranging from 20 to 72). Participant satisfaction was higher in the on-line group (4.3 +/- 0.73) compared to the standard group (3.09 +/- 1.11) (p = 0.001). The standard group also had fewer communication events compared to the on-line group (0.91 +/- 0.81 vs. 2.05 +/- 1.23; p = 0.0219). CONCLUSION: Our protocol for on-line scientific writing instruction is better than standard face-to-face instruction in terms of writing quality and student satisfaction. Future studies should evaluate the protocol efficacy in larger longitudinal cohorts involving participants from different languages.

Study protocol: the Adherence and Intensification of Medications (AIM) study--a cluster randomized controlled effectiveness study.

BACKGROUND: Many patients with diabetes have poor blood pressure (BP) control. Pharmacological therapy is the cornerstone of effective BP treatment, yet there are high rates both of poor medication adherence and failure to intensify medications. Successful medication management requires an effective partnership between providers who initiate and increase doses of effective medications and patients who adhere to the regimen. METHODS: In this cluster-randomized controlled effectiveness study, primary care teams within sites were randomized to a program led by a clinical pharmacist trained in motivational interviewing-based behavioral counseling approaches and authorized to make BP medication changes or to usual care. This study involved the collection of data during a 14-month intervention period in three Department of Veterans Affairs facilities and two Kaiser Permanente Northern California facilities. The clinical pharmacist was supported by clinical information systems that enabled proactive identification of, and outreach to, eligible patients identified on the basis of poor BP control and either medication refill gaps or lack of recent medication intensification. The primary outcome is the relative change in systolic blood pressure (SBP) measurements over time. Secondary outcomes are changes in Hemoglobin A1c, low-density lipoprotein cholesterol (LDL), medication adherence determined from pharmacy refill data, and medication intensification rates. DISCUSSION: Integration of the three intervention elements--proactive identification, adherence counseling and medication intensification--is essential to achieve optimal levels of control for high-risk patients. Testing the effectiveness of this intervention at the team level allows us to study the program as it would typically be implemented within a clinic setting, including how it integrates with other elements of care. TRIAL REGISTRATION: The ClinicalTrials.gov registration number is NCT00495794.

Design, Fabrication, and Characterization of Carbon Nanotube Field Emission Devices for Advanced Applications

Carbon nanotubes (CNTs) have recently emerged as promising candidates for electron field emission (FE) cathodes in integrated FE devices. These nanostructured carbon materials possess exceptional properties and their synthesis can be thoroughly controlled. Their integration into advanced electronic devices, including not only FE cathodes, but sensors, energy storage devices, and circuit components, has seen rapid growth in recent years. The results of the studies presented here demonstrate that the CNT field emitter is an excellent candidate for next generation vacuum microelectronics and related electron emission devices in several advanced applications.

The work presented in this study addresses determining factors that currently confine the performance and application of CNT-FE devices. Characterization studies and improvements to the FE properties of CNTs, along with Micro-Electro-Mechanical Systems (MEMS) design and fabrication, were utilized in achieving these goals. Important performance limiting parameters, including emitter lifetime and failure from poor substrate adhesion, are examined. The compatibility and integration of CNT emitters with the governing MEMS substrate (i.e., polycrystalline silicon), and its impact on these performance limiting parameters, are reported. CNT growth mechanisms and kinetics were investigated and compared to silicon (100) to improve the design of CNT emitter integrated MEMS based electronic devices, specifically in vacuum microelectronic device (VMD) applications.

Improved growth allowed for design and development of novel cold-cathode FE devices utilizing CNT field emitters. A chemical ionization (CI) source based on a CNT-FE electron source was developed and evaluated in a commercial desktop mass spectrometer for explosives trace detection. This work demonstrated the first reported use of a CNT-based ion source capable of collecting CI mass spectra. The CNT-FE source demonstrated low power requirements, pulsing capabilities, and average lifetimes of over 320 hours when operated in constant emission mode under elevated pressures, without sacrificing performance. Additionally, a novel packaged ion source for miniature mass spectrometer applications using CNT emitters, a MEMS based Nier-type geometry, and a Low Temperature Cofired Ceramic (LTCC) 3D scaffold with integrated ion optics were developed and characterized. While previous research has shown other devices capable of collecting ion currents on chip, this LTCC packaged MEMS micro-ion source demonstrated improvements in energy and angular dispersion as well as the ability to direct the ions out of the packaged source and towards a mass analyzer. Simulations and experimental design, fabrication, and characterization were used to make these improvements.

Finally, novel CNT-FE devices were developed to investigate their potential to perform as active circuit elements in VMD circuits. Difficulty integrating devices at micron-scales has hindered the use of vacuum electronic devices in integrated circuits, despite the unique advantages they offer in select applications. Using a combination of particle trajectory simulation and experimental characterization, device performance in an integrated platform was investigated. Solutions to the difficulties in operating multiple devices in close proximity and enhancing electron transmission (i.e., reducing grid loss) are explored in detail. A systematic and iterative process was used to develop isolation structures that reduced crosstalk between neighboring devices from 15% on average, to nearly zero. Innovative geometries and a new operational mode reduced grid loss by nearly threefold, thereby improving transmission of the emitted cathode current to the anode from 25% in initial designs to 70% on average. These performance enhancements are important enablers for larger scale integration and for the realization of complex vacuum microelectronic circuits.