Monte Carlo Analysis and Physics Characterization of a Novel Nanoparticle Detector for Medical and Micro-dosimetry Applications

The outcomes for both (i) radiation therapy and (ii) preclinical small animal radio- biology studies are dependent on the delivery of a known quantity of radiation to a specific and intentional location. Adverse effects can result from these procedures if the dose to the target is too high or low, and can also result from an incorrect spatial distribution in which nearby normal healthy tissue can be undesirably damaged by poor radiation delivery techniques. Thus, in mice and humans alike, the spatial dose distributions from radiation sources should be well characterized in terms of the absolute dose quantity, and with pin-point accuracy. When dealing with the steep spatial dose gradients consequential to either (i) high dose rate (HDR) brachytherapy or (ii) within the small organs and tissue inhomogeneities of mice, obtaining accurate and highly precise dose results can be very challenging, considering commercially available radiation detection tools, such as ion chambers, are often too large for in-vivo use.

In this dissertation two tools are developed and applied for both clinical and preclinical radiation measurement. The first tool is a novel radiation detector for acquiring physical measurements, fabricated from an inorganic nano-crystalline scintillator that has been fixed on an optical fiber terminus. This dosimeter allows for the measurement of point doses to sub-millimeter resolution, and has the ability to be placed in-vivo in humans and small animals. Real-time data is displayed to the user to provide instant quality assurance and dose-rate information. The second tool utilizes an open source Monte Carlo particle transport code, and was applied for small animal dosimetry studies to calculate organ doses and recommend new techniques of dose prescription in mice, as well as to characterize dose to the murine bone marrow compartment with micron-scale resolution.

Hardware design changes were implemented to reduce the overall fiber diameter to <0.9 mm for the nano-crystalline scintillator based fiber optic detector (NanoFOD) system. Lower limits of device sensitivity were found to be approximately 0.05 cGy/s. Herein, this detector was demonstrated to perform quality assurance of clinical 192Ir HDR brachytherapy procedures, providing comparable dose measurements as thermo-luminescent dosimeters and accuracy within 20% of the treatment planning software (TPS) for 27 treatments conducted, with an inter-quartile range ratio to the TPS dose value of (1.02-0.94=0.08). After removing contaminant signals (Cerenkov and diode background), calibration of the detector enabled accurate dose measurements for vaginal applicator brachytherapy procedures. For 192Ir use, energy response changed by a factor of 2.25 over the SDD values of 3 to 9 cm; however a cap made of 0.2 mm thickness silver reduced energy dependence to a factor of 1.25 over the same SDD range, but had the consequence of reducing overall sensitivity by 33%.

For preclinical measurements, dose accuracy of the NanoFOD was within 1.3% of MOSFET measured dose values in a cylindrical mouse phantom at 225 kV for x-ray irradiation at angles of 0, 90, 180, and 270˝. The NanoFOD exhibited small changes in angular sensitivity, with a coefficient of variation (COV) of 3.6% at 120 kV and 1% at 225 kV. When the NanoFOD was placed alongside a MOSFET in the liver of a sacrificed mouse and treatment was delivered at 225 kV with 0.3 mm Cu filter, the dose difference was only 1.09% with use of the 4x4 cm collimator, and -0.03% with no collimation. Additionally, the NanoFOD utilized a scintillator of 11 µm thickness to measure small x-ray fields for microbeam radiation therapy (MRT) applications, and achieved 2.7% dose accuracy of the microbeam peak in comparison to radiochromic film. Modest differences between the full-width at half maximum measured lateral dimension of the MRT system were observed between the NanoFOD (420 µm) and radiochromic film (320 µm), but these differences have been explained mostly as an artifact due to the geometry used and volumetric effects in the scintillator material. Characterization of the energy dependence for the yttrium-oxide based scintillator material was performed in the range of 40-320 kV (2 mm Al filtration), and the maximum device sensitivity was achieved at 100 kV. Tissue maximum ratio data measurements were carried out on a small animal x-ray irradiator system at 320 kV and demonstrated an average difference of 0.9% as compared to a MOSFET dosimeter in the range of 2.5 to 33 cm depth in tissue equivalent plastic blocks. Irradiation of the NanoFOD fiber and scintillator material on a 137Cs gamma irradiator to 1600 Gy did not produce any measurable change in light output, suggesting that the NanoFOD system may be re-used without the need for replacement or recalibration over its lifetime.

For small animal irradiator systems, researchers can deliver a given dose to a target organ by controlling exposure time. Currently, researchers calculate this exposure time by dividing the total dose that they wish to deliver by a single provided dose rate value. This method is independent of the target organ. Studies conducted here used Monte Carlo particle transport codes to justify a new method of dose prescription in mice, that considers organ specific doses. Monte Carlo simulations were performed in the Geant4 Application for Tomographic Emission (GATE) toolkit using a MOBY mouse whole-body phantom. The non-homogeneous phantom was comprised of 256x256x800 voxels of size 0.145x0.145x0.145 mm3. Differences of up to 20-30% in dose to soft-tissue target organs was demonstrated, and methods for alleviating these errors were suggested during whole body radiation of mice by utilizing organ specific and x-ray tube filter specific dose rates for all irradiations.

Monte Carlo analysis was used on 1 µm resolution CT images of a mouse femur and a mouse vertebra to calculate the dose gradients within the bone marrow (BM) compartment of mice based on different radiation beam qualities relevant to x-ray and isotope type irradiators. Results and findings indicated that soft x-ray beams (160 kV at 0.62 mm Cu HVL and 320 kV at 1 mm Cu HVL) lead to substantially higher dose to BM within close proximity to mineral bone (within about 60 µm) as compared to hard x-ray beams (320 kV at 4 mm Cu HVL) and isotope based gamma irradiators (137Cs). The average dose increases to the BM in the vertebra for these four aforementioned radiation beam qualities were found to be 31%, 17%, 8%, and 1%, respectively. Both in-vitro and in-vivo experimental studies confirmed these simulation results, demonstrating that the 320 kV, 1 mm Cu HVL beam caused statistically significant increased killing to the BM cells at 6 Gy dose levels in comparison to both the 320 kV, 4 mm Cu HVL and the 662 keV, 137Cs beams.

Poverty and Place in the Context of the American South

In the United States, poverty has been historically higher and disproportionately concentrated in the American South. Despite this fact, much of the conventional poverty literature in the United States has focused on urban poverty in cities, particularly in the Northeast and Midwest. Relatively less American poverty research has focused on the enduring economic distress in the South, which Wimberley (2008:899) calls “a neglected regional crisis of historic and contemporary urgency.” Accordingly, this dissertation contributes to the inequality literature by focusing much needed attention on poverty in the South.

Each empirical chapter focuses on a different aspect of poverty in the South. Chapter 2 examines why poverty is higher in the South relative to the Non-South. Chapter 3 focuses on poverty predictors within the South and whether there are differences in the sub-regions of the Deep South and Peripheral South. These two chapters compare the roles of family demography, economic structure, racial/ethnic composition and heterogeneity, and power resources in shaping poverty. Chapter 4 examines whether poverty in the South has been shaped by historical racial regimes.

The Luxembourg Income Study (LIS) United States datasets (2000, 2004, 2007, 2010, and 2013) (derived from the U.S. Census Current Population Survey (CPS) Annual Social and Economic Supplement) provide all the individual-level data for this study. The LIS sample of 745,135 individuals is nested in rich economic, political, and racial state-level data compiled from multiple sources (e.g. U.S. Census Bureau, U.S. Department of Agriculture, University of Kentucky Center for Poverty Research, etc.). Analyses involve a combination of techniques including linear probability regression models to predict poverty and binary decomposition of poverty differences.

Chapter 2 results suggest that power resources, followed by economic structure, are most important in explaining the higher poverty in the South. This underscores the salience of political and economic contexts in shaping poverty across place. Chapter 3 results indicate that individual-level economic factors are the largest predictors of poverty within the South, and even more so in the Deep South. Moreover, divergent results between the South, Deep South, and Peripheral South illustrate how the impact of poverty predictors can vary in different contexts. Chapter 4 results show significant bivariate associations between historical race regimes and poverty among Southern states, although regression models fail to yield significant effects. Conversely, historical race regimes do have a small, but significant effect in explaining the Black-White poverty gap. Results also suggest that employment and education are key to understanding poverty among Blacks and the Black-White poverty gap. Collectively, these chapters underscore why place is so important for understanding poverty and inequality. They also illustrate the salience of micro and macro characteristics of place for helping create, maintain, and reproduce systems of inequality across place.

The paradox of openness revisited: Collaborative innovation and patenting by UK innovators

© 2016 The Authors.We revisit the "paradox of openness" in the literature which consists of two conflicting views on the link between patenting and open innovation-the spillover prevention and the organizational openness views. We use the data from the Survey of Innovation and Patent Use and the Community Innovation Survey (CIS6) in the UK to assess the empirical support for the distinct predictions of these theories. We argue that both patenting and external sourcing (openness) are jointly-determined decisions made by firms. Their relationship is contingent upon whether the firms are technically superior to their rivals and lead in the market or not. Leading firms are more vulnerable to unintended knowledge spillovers during collaboration as compared to followers, and consequently, the increase in patenting due to openness is higher for leaders than for followers. We develop a simple framework that allows us to formally derive the empirical implications of this hypothesis and test it by estimating whether the reduced form relationship between patenting and collaboration is stronger for leaders than for followers.