Advanced Adhesion Strength Testing Methods of Thin Film Multilayers in Electronic Packaging Systems

With the continued miniaturization and increasing performance of electronic devices, new technical challenges have arisen. One such issue is delamination occurring at critical interfaces inside the device. This major reliability issue can occur during the manufacturing process or during normal use of the device. Proper evaluation of the adhesion strength of critical interfaces early in the product development cycle can help reduce reliability issues and time-to-market of the product. However, conventional adhesion strength testing is inherently limited in the face of package miniaturization, which brings about further technical challenges to quantify design integrity and reliability. Although there are many different interfaces in today's advanced electronic packages, they can be generalized into two main categories: 1) rigid to rigid connections with a thin flexible polymeric layer in between, or 2) a thin film membrane on a rigid structure. Knowing that every technique has its own advantages and disadvantages, multiple testing methods must be enhanced and developed to be able to accommodate all the interfaces encountered for emerging electronic packaging technologies. For evaluating the adhesion strength of high adhesion strength interfaces in thin multilayer structures a novel adhesion test configuration called “single cantilever adhesion test (SCAT)” is proposed and implemented for an epoxy molding compound (EMC) and photo solder resist (PSR) interface. The test method is then shown to be capable of comparing and selecting the stronger of two potential EMC/PSR material sets. Additionally, a theoretical approach for establishing the applicable testing domain for a four-point bending test method was presented. For evaluating polymeric films on rigid substrates, major testing challenges are encountered for reducing testing scatter and for factoring in the potentially degrading effect of environmental conditioning on the material properties of the film. An advanced blister test with predefined area test method was developed that considers an elasto-plastic analytical solution and implemented for a conformal coating used to prevent tin whisker growth. The advanced blister testing with predefined area test method was then extended by employing a numerical method for evaluating the adhesion strength when the polymer’s film properties are unknown.

Characterization of Non-linear Polymer Properties to Predict Process Induced Warpage and Residual Stress of Electronic Packages

Nonlinear thermo-mechanical properties of advanced polymers are crucial to accurate prediction of the process induced warpage and residual stress of electronics packages. The Fiber Bragg grating (FBG) sensor based method is advanced and implemented to determine temperature and time dependent nonlinear properties. The FBG sensor is embedded in the center of the cylindrical specimen, which deforms together with the specimen. The strains of the specimen at different loading conditions are monitored by the FBG sensor. Two main sources of the warpage are considered: curing induced warpage and coefficient of thermal expansion (CTE) mismatch induced warpage. The effective chemical shrinkage and the equilibrium modulus are needed for the curing induced warpage prediction. Considering various polymeric materials used in microelectronic packages, unique curing setups and procedures are developed for elastomers (extremely low modulus, medium viscosity, room temperature curing), underfill materials (medium modulus, low viscosity, high temperature curing), and epoxy molding compound (EMC: high modulus, high viscosity, high temperature pressure curing), most notably, (1) zero-constraint mold for elastomers; (2) a two-stage curing procedure for underfill materials and (3) an air-cylinder based novel setup for EMC. For the CTE mismatch induced warpage, the temperature dependent CTE and the comprehensive viscoelastic properties are measured. The cured cylindrical specimen with a FBG sensor embedded in the center is further used for viscoelastic property measurements. A uni-axial compressive loading is applied to the specimen to measure the time dependent Young’s modulus. The test is repeated from room temperature to the reflow temperature to capture the time-temperature dependent Young’s modulus. A separate high pressure system is developed for the bulk modulus measurement. The time temperature dependent bulk modulus is measured at the same temperatures as the Young’s modulus. The master curve of the Young’s modulus and bulk modulus of the EMC is created and a single set of the shift factors is determined from the time temperature superposition. The supplementary experiments are conducted to verify the validity of the assumptions associated with the linear viscoelasticity. The measured time-temperature dependent properties are further verified by a shadow moiré and Twyman/Green test.

Turkish Security Policymaking on Nuclear Issues: Conceptualizing Advanced Cooperative Security Strategies

Turkey is a non-nuclear member of a nuclear alliance in a region where nuclear proliferation is of particular concern. As the only North Atlantic Treaty Organization (NATO) member that has a border with the Middle East, Turkish officials argue that Turkey cannot solely rely on NATO guarantees in addressing the regional security challenges. However, Turkey has not been able to formulate a security policy that reconciles its quest for independence, its NATO membership, the bilateral relationship with the United States, and regional engagement in the Middle East. This dissertation assesses the strategic implications of Turkey’s perceptions of the U.S./NATO nuclear and conventional deterrence on nuclear issues. It explores three case studies by the process tracing of Turkish policymakers’ nuclear-related decisions on U.S. tactical nuclear weapons deployed in Europe, national air and missile defense, and Iran’s nuclear program. The study finds that the principles of Turkish security policymaking do not incorporate a fundamentally different reasoning on nuclear issues than conventional deterrence. Nuclear weapons and their delivery systems do not have a defining role in Turkish security and defense strategy. The decisions are mainly guided by non-nuclear considerations such as Alliance politics, modernization of the domestic defense industry, and regional influence. The dissertation argues that Turkey could formulate more effective and less risky security policies on nuclear issues by emphasizing the cooperative security approaches within the NATO Alliance over confrontational measures. The findings of this dissertation reveal that a major transformation of Turkish security policymaking is required to end the crisis of confidence with NATO, redefinition of the strategic partnership with the US, and a more cautious approach toward the Middle East. The dissertation argues that Turkey should promote proactive measures to reduce, contain, and counter risks before they develop into real threats, as well as contribute to developing consensual confidence-building measures to reduce uncertainty.