Increasing Stability of Lithium-Ion Batteries with Ordered Graphene Silicon Negative Electrodes

Currently, lackluster battery capability is restricting the widespread integration of Smart Grids, limiting the long-term feasibility of alternative, green energy conversion technologies. Silicon nanoparticles have great conductivity for applications in rechargeable batteries, but have degradation issues due to changes in volume during lithiation/delithiation cycles. To combat this, we use electrochemical deposition to uniformly space silicon particles on graphene sheets to create a more stable structure. We found the process of electrochemical deposition degraded the graphene binding in the electrode material, severely reducing charge capacity. But, the usage of mechanically mixing silicon particles with grapheme yielded batteries better than those that are commercially available.

BEHAVIOR OF FIBER REINFORCED POLYMER COMPOSITE PILES WITH ELLIPTICAL CROSS SECTIONS IN INTEGRAL ABUTMENT BRIDGE FOUNDATIONS

Every year in the US and other cold-climate countries considerable amount of money is spent to restore structural damages in conventional bridges resulting from (or “caused by”) salt corrosion in bridge expansion joints. Frequent usage of deicing salt in conventional bridges with expansion joints results in corrosion and other damages to the expansion joints, steel girders, stiffeners, concrete rebar, and any structural steel members in the abutments. The best way to prevent these damages is to eliminate the expansion joints at the abutment and elsewhere and make the entire bridge abutment and deck a continuous monolithic structural system. This type of bridge is called Integral Abutment Bridge which is now widely used in the US and other cold-climate countries. In order to provide lateral flexibility, the entire abutment is constructed on piles. Piles used in integral abutments should have enough capacity in the perpendicular direction to support the vertical forces. In addition, piles should be able to withstand corrosive environments near the surface of the ground and maintain their performance during the lifespan of the bridge. Fiber Reinforced Polymer (FRP) piles are a new type of pile that can not only accommodate large displacements, but can also resist corrosion significantly better than traditional steel or concrete piles. The use of FRP piles extends the life of the pile which in turn extends the life of the bridge. This dissertation studies FRP piles with elliptical shapes. The elliptical shapes can simultaneously provide flexibility and stiffness in two perpendicular axes. The elliptical shapes can be made using the filament winding method which is a less expensive method of manufacturing compared to the pultrusion or other manufacturing methods. In this dissertation a new way is introduced to construct the desired elliptical shapes with the filament winding method. Pile specifications such as dimensions, number of layers, fiber orientation angles, material, and soil stiffness are defined as parameters and the effects of each parameter on the pile stresses and pile failure have been studied. The ANSYS software has been used to model the composite materials. More than 14,000 nonlinear finite element pile models have been created, each slightly different from the others. The outputs of analyses have been used to draw curves. Optimum values of the parameters have been defined using generated curves. The best approaches to find optimum shape, angle of fibers and types of composite material have been discussed.

Assessment and Life-Cycle Analysis of Recycled Materials for Sustainable Highway

Recycled materials replacing part of virgin materials in highway applications has shown great benefits to the society and environment. Beneficial use of recycled materials can save landfill places, sparse natural resources, and energy consumed in milling and hauling virgin materials. Low price of recycled materials is favorable to cost-saving in pavement projects. Considering the availability of recycled materials in the State of Maryland (MD), four abundant recycled materials, recycled concrete aggregate (RCA), recycled asphalt pavement (RAP), foundry sand (FS), and dredged materials (DM), were studied. A survey was conducted to collect the information of current usage of the four recycled materials in States’ Department of Transportation (DOTs). Based on literature review, mechanical and environmental properties, recommendations, and suggested test standards were investigated separately for the four recycled materials in different applications. Constrains in using these materials were further studied in order to provide recommendations for the development of related MD specifications. To measure social and environmental benefits from using recycled materials, life-cycle assessment was carried out with life-cycle analysis (LCA) program, PaLATE, and green highway rating system, BEST-in-Highway. The survey results indicated the wide use of RAP and RCA in hot mix asphalt (HMA) and graded aggregate base (GAB) respectively, while FS and DM are less used in field. Environmental concerns are less, but the possibly low quality and some adverse mechanical characteristics may hinder the widely use of these recycled materials. Technical documents and current specifications provided by State DOTs are good references to the usage of these materials in MD. Literature review showed consistent results with the survey. Studies from experimental research or site tests showed satisfactory performance of these materials in highway applications, when the substitution rate, gradation, temperature, moisture, or usage of additives, etc. meet some requirements. The results from LCA revealed significant cost savings in using recycled materials. Energy and water consumption, gas emission, and hazardous waste generation generally showed reductions to some degree. Use of new recycled technologies will contribute to more sustainable highways.

States' Responding Behavior in Conflict: Asymmetric Response and Strategic Conflict Avoidance

State responses to external threats and aggression are studied with focus on two different rationales: (1) to make credible deterrent threats to avoid being exploited, and (2) to minimize the risk of escalation to unwanted war. Given external aggression, the target state's responding behavior has three possibilities: concession (under-response), reciprocation, and escalation. This study focuses on the first two possibilities and investigates how the strategic nature of crisis interaction can explain the intentional choice of concession or avoidance of retaliation. I build a two-level bargaining model that accounts for the domestic bargaining situation between the leader and the challenger for each state. The model's equilibrium shows that the responding behavior is determined not only by inter-state level variables (e.g. balance of power between two states, or cost of war that each state is supposed to pay), but also the domestic variables of both states. Next, the strategic interaction is rationally explained by the model: as the responding state believes that the initiating state has strong domestic challenges and, hence, the aggression is believed to be initiated for domestic political purposes (a rally-around-the-flag effect), the response tends to decrease. The concession is also predicted if the target state leader has strong bargaining power against her domestic challengers \emph{and} she believes that the initiating leader suffers from weak domestic standing. To test the model's prediction, I conduct a lab experiment and case studies. The experimental result shows that under an incentivized bargaining situation, individual actors are observed to react to hostile action as the model predicts: if the opponent is believed to suffer from internally driven difficulties, the subject will not punish hostile behavior of the other player as severely as she would without such a belief. The experiment also provides supporting evidence for the choice of concession: when the player finds herself in a favorable situation while the other has disadvantages, the player is more likely to make concessions in the controlled dictator game. Two cases are examined to discuss how the model can explain the choice of either reciprocation or concession. From personal interviews and fieldwork in South Korea, I find that South Korea's reciprocating behavior during the 2010 Yeonpyeong Island incident is explained by a combination of `low domestic power of initiating leader (Kim Jong-il)' and `low domestic power of responding leader (Lee Myung-bak).' On the other hand, the case of EC-121 is understood as a non-response or concession outcome. Declassified documents show that Nixon and his key advisors interpreted the attack as a result of North Korea's domestic political instabilities (low domestic power of initiating leader) and that Nixon did not have difficulties at domestic politics during the first few months of his presidency (high domestic power of responding leader).