AIR SIDE HEAT TRANSFER ENHANCEMENT IN HEAT EXCHANGERS UTILIZING INNOVATIVE DESIGNS AND THE ADDITIVE MANUFACTURING TECHNIQUE

Over the last decade, rapid development of additive manufacturing techniques has allowed the fabrication of innovative and complex designs. One field that can benefit from such technology is heat exchanger fabrication, as heat exchanger design has become more and more complex due to the demand for higher performance particularly on the air side of the heat exchanger. By employing the additive manufacturing, a heat exchanger design was successfully realized, which otherwise would have been very difficult to fabricate using conventional fabrication technologies. In this dissertation, additive manufacturing technique was implemented to fabricate an advanced design which focused on a combination of heat transfer surface and fluid distribution system. Although the application selected in this dissertation is focused on power plant dry cooling applications, the results of this study can directly and indirectly benefit other sectors as well, as the air-side is often the limiting side for in liquid or single phase cooling applications. Two heat exchanger designs were studied. One was an advanced metallic heat exchanger based on manifold-microchannel technology and the other was a polymer heat exchanger based on utilization of prime surface technology. Polymer heat exchangers offer several advantages over metals such as antifouling, anticorrosion, lightweight and often less expensive than comparable metallic heat exchangers. A numerical modeling and optimization were performed to calculate a design that yield an optimum performance. The optimization results show that significant performance enhancement is noted compared to the conventional heat exchangers like wavy fins and plain plate fins. Thereafter, both heat exchangers were scaled down and fabricated using additive manufacturing and experimentally tested. The manifold-micro channel design demonstrated that despite some fabrication inaccuracies, compared to a conventional wavy-fin surface, 15% - 50% increase in heat transfer coefficient was possible for the same pressure drop value. In addition, if the fabrication inaccuracy can be eliminated, an even larger performance enhancement is predicted. Since metal based additive manufacturing is still in the developmental stage, it is anticipated that with further refinement of the manufacturing process in future designs, the fabrication accuracy can be improved. For the polymer heat exchanger, by fabricating a very thin wall heat exchanger (150μm), the wall thermal resistance, which usually becomes the limiting side for polymer heat exchanger, was calculated to account for only up to 3% of the total thermal resistance. A comparison of air-side heat transfer coefficient of the polymer heat exchanger with some of the commercially available plain plate fin surface heat exchangers show that polymer heat exchanger performance is equal or superior to plain plate fin surfaces. This shows the promising potential for polymer heat exchangers to compete with conventional metallic heat exchangers when an additive manufacturing-enabled fabrication is utilized. Major contributions of this study are as follows: (1) For the first time demonstrated the potential of additive manufacturing in metal printing of heat exchangers that benefit from a sophisticated design to yield a performance substantially above the respective conventional systems. Such heat exchangers cannot be fabricated with the conventional fabrication techniques. (2) For the first time demonstrated the potential of additive manufacturing to produce polymer heat exchangers that by design minimize the role of thermal conductivity and deliver a thermal performance equal or better that their respective metallic heat exchangers. In addition of other advantages of polymer over metal like antifouling, anticorrosion, and lightweight. Details of the work are documented in respective chapters of this thesis.

Landscape and Architecture: A Balance for Fellowship and Contemplation at Dumbarton Oaks

This thesis will explore ideas relating to the engagement of man and nature by promoting the experiences of contemplation and fellowship. The focus will be an urban academic retreat facility to provide an escape from distraction of typical modern urban life. Set within the historic Washington D.C. neighborhood of Georgetown, Dumbarton Oaks is an active academic research institution The Institute is holistically designed; architecture integrated with its surrounding landscape The Institute selects diverse scholars to think, live, and commune within the facility and landscape for up to two years. This thesis will use the existing site, themes, and history of Dumbarton Oaks as a launching point to explore the relationship between architecture, man, and landscape. A proposal to relocate the Fellow’s residences and reorganize the western edge of the site will help reactivate this forgotten piece of the site realize its potential.

A MORE COMPLETE STREET A STREET FOR EVERYONE TO ENJOY, NORTH EAST STREET, FREDERICK, MARYLAND – A DESIGN INVESTIGATION OF DIFFERENT STREET DESIGN THEORIES

This design-research thesis suggests that the improvement of North East Street performances by using Complete Streets, Green Street, Place Making and Context Sensitive Solution principles and practices. Heavily used by a variety of users, often conflicting with one another, University of Maryland Campus Drive would benefit from a major planning and design amelioration to meet the increasing demands of serving as a city main street. The goal of this thesis project is to prioritize the benefits for pedestrians in the right-of-way and improve the pedestrian experience. This goal also responds to the recent North East Street Extension Phrase I of economic renaissances. The goal of this design-research thesis will be achieved focusing on four aspects. First, the plans and designs will suggest to building mixed use blocks, increase the diversity of street economic types and convenience of people’s living. Second, design and plans will propose bike lanes, separate driving lanes from sidewalks and bike lanes by street tree planters, and narrow driving lanes to reduce vehicular traffic volume and speed in order to reduce pedestrian and vehicle conflicts. Third, plans and designs will introduce bioswales, living walls and raingardens to treat and reuse rain water. Finally, the plans and designs will seek to preserve local culture and history by adding murals and farmers market. The outcome of the design-research thesis project is expected to serve as an example of implementing Complete Streets, Green Street, Place Making and Context Sensitive Solution principles and practices in urban landscape, where transportation, environment and social needs interact with each other.

Polish Violin Music in the 20th and 21st Century

The purpose of this dissertation is to promote Polish violin music written in the 20th and 21st Century. My recitals included many lesser-known compositions and composers which I strongly believe deserve to be better known and more often performed. The search and preparation of those pieces, for which recordings and music scores are not easily found, was a very exciting and stimulating process. Much Polish music written in the 20th and 21st Century is interesting, expressive, beautiful, and deserves to be more often performed. Performing 20th and 21st Century music opens new perspectives in two directions: musically and technically. Performer and listener are, in many cases, unbound from tonality. Composers are looking for new sonorities and exploring such performing techniques as varieties of harmonics, quarter tones, extreme dynamics, complex rhythms, and usage of a wide range of registers. An important part of Polish music is Polish folklore. The little town of Zakopane is known for Polish traditional clothing, food, architecture, dance and music. Also, most prominent Polish luthiers including Wojciech Topa, whose instrument I am playing, have been making their instruments in Zakopane. This little town in the Tatras Mountain has been an inspiration for many Polish artists including Iwaszkiewicz, Witkacy, Karłowicz, and Szymanowski. Those composers used such folklore elements as folk scales, popular tunes, and imitations of the sound of the folk band with characteristic folk dance rhythms. Other musical genres where folk elements are strongly present are the compositions dedicated to young musicians, with a specifically educational purpose. Among composers who wrote educational music were Grażyna Bacewicz, Witold Lutosławski, and Henryk Mikołaj Górecki. This approach makes the works more easily understood by young performers and, at the same time, broadens their understanding of Polish culture and prepares them for the challenges of contemporary music. This has been an exciting project for me because, on the one hand, it allowed me the challenge of performing compositions that are lesser-known and often consist of musical language new to me while, on the other, it brought me back to my roots and the country of my mother tongue.

Reimagining Ruins: Preserve | Utilize | Interact

This thesis will examine ways to preserve ruinous structures, utilize their aesthetics, and design an interactive intervention that weaves the old and new together in a seamless way. Ruinous structures should not be seen as an eye-sore to the image of the city. In fact, it is a reminder of all the things the city has faced in the past. This thesis analyzes different ways that previous designers have rehabilitated pre-existing structures. These methods are applied to each potential site in order to determine which typology would prove most fruitful. Site selection followed specific criteria. The first is that the structure could not be a complete building. Second, the site should be part of a community. And third, the structure should be located in an urban area. By the end of this journey, this thesis seeks awareness having pre-existing structures woven into new designs, and as an opportunity to inspire.