Water Quality Impacts due to the Addition of Biosolids-Derived Compost to Bioretention

Bioretention is a common stormwater control measure (SCM). While compost, combined with other bioretention soil media (BSM), has the potential for increased pollutant and water uptake and storage, it also may leach harmful nutrients. Limited information is available on the use of compost in SCMs. Therefore, this project seeks to analyze the impacts of the addition of biosolids-derived compost to bioretention. To accomplish this, bioretention mesocosm column studies were conducted to determine the leaching effects of 15%, 30%, and 30% tap water-washed compost, mixed with standard BSM. Synthetic storm runoff was applied to the columns and the effluent was analyzed for total nitrogen (N), phosphorus (P), and their speciation. All three columns leached N and P with maximum total N concentrations of 2,200, 2,100, and 300 mg-N/L and total P concentrations of 12, 4.9, and 4.6 mg-P/L for the 30%, 15%, and 30% washed mesocosms, respectively. Therefore, based on this study, it is not recommended that biosolids-derived compost be added to bioretention media.

Effects of Drive Speed Modulation on Dynamics of Slender Rotating Structures

Slender rotating structures are used in many mechanical systems. These structures can suffer from undesired vibrations that can affect the components and safety of a system. Furthermore, since some these structures can operate in a harsh environment, installation and operation of sensors that are needed for closed-loop and collocated control schemes may not be feasible. Hence, the need for an open-loop non-collocated scheme for control of the dynamics of these structures. In this work, the effects of drive speed modulation on the dynamics of slender rotating structures are studied. Slender rotating structures are a type of mechanical rotating structures, whose length to diameter ratio is large. For these structures, the torsion mode natural frequencies can be low. In particular, for isotropic structures, the first few torsion mode frequencies can be of the same order as the first few bending mode frequencies. These situations can be conducive for energy transfer amongst bending and torsion modes. Scenarios with torsional vibrations experienced by rotating structures with continuous rotor-stator contact occur in many rotating mechanical systems. Drill strings used in the oil and gas industry are an example of rotating structures whose torsional vibrations can be deleterious to the components of the drilling system. As a novel approach to mitigate undesired vibrations, the effects of adding a sinusoidal excitation to the rotation speed of a drill string are studied. A portion of the drill string located within a borewell is considered and this rotating structure has been modeled as an extended Jeffcott rotor and a sinusoidal excitation has been added to the drive speed of the rotor. After constructing a three-degree-of-freedom model to capture lateral and torsional motions, the equations of motions are reduced to a single differential equation governing torsional vibrations during continuous stator contact. An approximate solution has been obtained by making use of the Method of Direct Partition of Motions with the governing torsional equation of motion. The results showed that for a rotor undergoing forward or backward whirling, the addition of sinusoidal excitation to the drive speed can cause an increase in the equivalent torsional stiffness, smooth the discontinuous friction force at contact, and reduce the regions of negative slope in the friction coefficient variation with respect to speed. Experiments with a scaled drill string apparatus have also been conducted and the experimental results show good agreement with the numerical results obtained from the developed models. These findings suggest that the extended Jeffcott rotordynamics model can be useful for studies of rotor dynamics in situations with continuous rotor-stator contact. Furthermore, the results obtained suggest that the drive speed modulation scheme can have value for attenuating drill-string vibrations.

Wetting of Graphene

Graphene, a remarkable 2D material, has attracted immense attention for its unique physical properties that make it ideal for a myriad of applications from electronics to biology. Fundamental to many such applications is the interaction of graphene with water, necessitating an understanding of wetting of graphene. Here, molecular dynamics simulations have been employed to understand two fundamental issues of water drop wetting on graphene: (a) the dynamics of graphene wetting and (b) wetting of graphene nanostructures. The first problem unravels that the wetting dynamics of nanodrops on graphene are exactly the same as on standard, non-2D (or non-layered) solids – this is an extremely important finding given the significant difference in the wetting statics of graphene with respect to standard solids stemming from graphene’s wetting translucency effect. This same effect, as shown in the second problem, interplays with roughness introduced by nanostructures to trigger graphene superhydrophobicity following a hitherto unknown route.

Nano-Engineering of Densely Packed Electrochemical Energy Storage Architectures by Atomic Layer Deposition

Nanostructures are highly attractive for future electrical energy storage devices because they enable large surface area and short ion transport time through thin electrode layers for high power devices. Significant enhancement in power density of batteries has been achieved by nano-engineered structures, particularly anode and cathode nanostructures spatially separated far apart by a porous membrane and/or a defined electrolyte region. A self-aligned nanostructured battery fully confined within a single nanopore presents a powerful platform to determine the rate performance and cyclability limits of nanostructured storage devices. Atomic layer deposition (ALD) has enabled us to create and evaluate such structures, comprised of nanotubular electrodes and electrolyte confined within anodic aluminum oxide (AAO) nanopores. The V2O5- V2O5 symmetric nanopore battery displays exceptional power-energy performance and cyclability when tested as a massively parallel device (~2billion/cm2), each with ~1m3 volume (~1fL). Cycled between 0.2V and 1.8V, this full cell has capacity retention of 95% at 5C rate and 46% at 150C, with more than 1000 charge/discharge cycles. These results demonstrate the promise of ultrasmall, self-aligned/regular, densely packed nanobattery structures as a testbed to study ionics and electrodics at the nanoscale with various geometrical modifications and as a building block for high performance energy storage systems[1, 2]. Further increase of full cell output potential is also demonstrated in asymmetric full cell configurations with various low voltage anode materials. The asymmetric full cell nanopore batteries, comprised of V2O5 as cathode and prelithiated SnO2 or anatase phase TiO2 as anode, with integrated nanotubular metal current collectors underneath each nanotubular storage electrode, also enabled by ALD. By controlling the amount of lithium ion prelithiated into SnO2 anode, we can tune full cell output voltage in the range of 0.3V and 3V. This asymmetric nanopore battery array displays exceptional rate performance and cyclability. When cycled between 1V and 3V, it has capacity retention of approximately 73% at 200C rate compared to 1C, with only 2% capacity loss after more than 500 charge/discharge cycles. With increased full cell output potential, the asymmetric V2O5-SnO2 nanopore battery shows significantly improved energy and power density. This configuration presents a more realistic test - through its asymmetric (vs symmetric) configuration – of performance and cyclability in nanoconfined environment. This dissertation covers (1) Ultra small electrochemical storage platform design and fabrication, (2) Electron and ion transport in nanostructured electrodes inside a half cell configuration, (3) Ion transport between anode and cathode in confined nanochannels in symmetric full cells, (4) Scale up energy and power density with geometry optimization and low voltage anode materials in asymmetric full cell configurations. As a supplement, selective growth of ALD to improve graphene conductance will also be discussed[3]. References: 1. Liu, C., et al., (Invited) A Rational Design for Batteries at Nanoscale by Atomic Layer Deposition. ECS Transactions, 2015. 69(7): p. 23-30. 2. Liu, C.Y., et al., An all-in-one nanopore battery array. Nature Nanotechnology, 2014. 9(12): p. 1031-1039. 3. Liu, C., et al., Improving Graphene Conductivity through Selective Atomic Layer Deposition. ECS Transactions, 2015. 69(7): p. 133-138.

A HUMAN-CENTERED APPROACH TO IMPROVING THE USER EXPERIENCE OF SOFTWARE UPDATES

Software updates are critical to the security of software systems and devices. Yet users often do not install them in a timely manner, leaving their devices open to security exploits. This research explored a re-design of automatic software updates on desktop and mobile devices to improve the uptake of updates through three studies. First using interviews, we studied users’ updating patterns and behaviors on desktop machines in a formative study. Second, we distilled these findings into the design of a low-fi prototype for desktops, and evaluated its efficacy for automating updates by means of a think-aloud study. Third, we investigated individual differences in update automation on Android devices using a large scale survey, and interviews. In this thesis, I present the findings of all three studies and provide evidence for how automatic updates can be better appropriated to fit users on both desktops and mobile devices. Additionally, I provide user interface design suggestions for software updates and outline recommendations for future work to improve the user experience of software updates.

Feasibility of An Online Survey Examining the Physical Activity Patterns Among South Asian Adults Residing In the United States

Background: Physical inactivity is a major risk factor for cardiovascular disease and diabetes among South Asians (SAs) - Bangladeshi, Bhutanese, Indian, Maldivian, Nepali, Pakistani, and Sri Lankan. Methods: An online survey was used to determine the feasibility of examining physical activity (PA) levels of SAs living in the US. The Social Ecological Model was the theoretical basis for identifying individual-level, social environmental, and physical environmental factors that impact PA. Results: Ethnicity, intention, self-efficacy, and perceived health benefits of PA were significantly associated with being physically active. Facilitators to PA included achieving improved health; while barriers were lack of time to exercise, unfamiliarity with PA, and nonexistent gender-specific PA facilities. Conclusions: This study showed that online surveys can be a promising tool for data collection among SAs. Health promotion programs should include education on the benefits of PA, and provide culturally sensitive facilities that support PA, especially for SA women.

Design of Nanophotonic Antireflection Coatings for III-V Thin-Film Photovoltaics

Thin-film photovoltaics have provided a critical design avenue to help decrease the overall cost of solar power. However, a major drawback of thin-film solar cell technology is decreased optical absorption, making compact, high-quality antireflection coatings of critical importance to ensure that all available light enters the cell. In this thesis, we describe high efficiency thin-film InP and GaAs solar cells that utilize a periodic array of nanocylinders as antireflection coatings. We use coupled optical and electrical simulations to find that these nanophotonic structures reduce the solar-weighted average reflectivity of InP and GaAs solar cells to around 1.3 %, outperforming the best double-layer antireflection coatings. The coupling between Mie scattering resonances and thin-film interference effects accurately describes the optical enhancement provided by the nanocylinders. The spectrally resolved reflectivity and J-V characteristics of the devices under AM1.5G solar illumination are determined via the coupled optical and electrical simulations, resulting in predicted power conversion efficiencies > 23 %. We conclude that the nanostructured coatings reduce reflection without negatively affecting the electronic properties of the InP and GaAs solar cells by separating the nanostructured optical components from the active layer of the device.

PREVALENCE, ISOLATION, AND GENETIC CHARACTERIZATION OF TOXOPLASMA GONDII IN CHICKEN

Toxoplasma gondii (T. gondii) is one of the most successful parasites in the world because of its capability of infecting all warm-blooded animals. It has been reported that up to one third of the world population is infected with this parasite. Chickens are recognized as good indicators of the environmental T. gondii oocysts contamination because they obtain food from the ground. Thus, the prevalence of T. gondii in chicken provides more insight related to public health concern from T. gondii. Previous studies have shown a high isolation rate from free-range chickens raised in the United States. The objectives of this study were to evaluate the microbial safety and infection of T. gondii in free-range chickens available at the grocery stores and farms for the consumers to purchase and genotype T. gondii isolates. Chicken hearts were obtained from the local markets and also from the farms raising free- range chickens. Heart juice was obtained from cavities of each heart. Modified agglutination test (MAT) for detection of IgG antibodies was conducted with those heart juice samples with titer of 1:5, 1:25, and 1: 100. Each seropositive heart was pepsin digested and bioassayed into a group of two mice. Six weeks post inoculation (p.i.) mice were bled and euthanized to examine the infection of T. gondii. In addition, multiplex multilocus nested PCR-RFLP was performed to genetically characterize T. gondii isolates with eleven PCR-RFLP markers including SAG1, SAG2, altSAT2, SAG3, BTUB, GRA6, c22-8, c29-a, L358, PK1, and Apico. One hundred fifty from a total of 997 samples (15.0%) were found seropositive for T. gondii. No viable T. gondii was isolated from chicken hearts that were sampled. A total of four genotypes were identified, including one new genotype and three previously identified genotypes. The results suggest that T. gondii oocysts could present in the environment and infect the food animals. T. gondii prevalence in chicken hearts could reflect the environmental contamination of T. gondii and prevalence information can be used to manage T. gondii infection risk.

Development of the ASTM E681 Standard

ASHRAE 34, based on ASTM E681, was improved by identifying and rectifying deficiencies in ASTM E681. An ASTM E681 apparatus and procedure was developed with gaseous refrigerant testing in mind. The plumbing was improved by ensuring that the pressure readings could be constantly monitored while decreasing leakage potential. An original electrical system was designed and constructed for the ignition system. Additionally, a control panel was constructed to isolate hazardous electrical elements, and facilitate the testing, while simultaneously organizing the critical plumbing and ignition components. 3D printing efficiently produced heat-resistant, nonreactive, and structurally stable lower electrode spacers, propellers, and propeller bars. The heating system was designed to ensure even temperature throughout the apparatus. The humidity system was designed to accurately condition the air. Recommendations to improve ASTM E681 are provided. The research can be built on to improve the accuracy and reproducibility of ASTM E681.

Performance and Robustness Analysis of Co-Prime and Nested Sampling

Coprime and nested sampling are well known deterministic sampling techniques that operate at rates significantly lower than the Nyquist rate, and yet allow perfect reconstruction of the spectra of wide sense stationary signals. However, theoretical guarantees for these samplers assume ideal conditions such as synchronous sampling, and ability to perfectly compute statistical expectations. This thesis studies the performance of coprime and nested samplers in spatial and temporal domains, when these assumptions are violated. In spatial domain, the robustness of these samplers is studied by considering arrays with perturbed sensor locations (with unknown perturbations). Simplified expressions for the Fisher Information matrix for perturbed coprime and nested arrays are derived, which explicitly highlight the role of co-array. It is shown that even in presence of perturbations, it is possible to resolve $O(M^2)$ under appropriate conditions on the size of the grid. The assumption of small perturbations leads to a novel ``bi-affine" model in terms of source powers and perturbations. The redundancies in the co-array are then exploited to eliminate the nuisance perturbation variable, and reduce the bi-affine problem to a linear underdetermined (sparse) problem in source powers. This thesis also studies the robustness of coprime sampling to finite number of samples and sampling jitter, by analyzing their effects on the quality of the estimated autocorrelation sequence. A variety of bounds on the error introduced by such non ideal sampling schemes are computed by considering a statistical model for the perturbation. They indicate that coprime sampling leads to stable estimation of the autocorrelation sequence, in presence of small perturbations. Under appropriate assumptions on the distribution of WSS signals, sharp bounds on the estimation error are established which indicate that the error decays exponentially with the number of samples. The theoretical claims are supported by extensive numerical experiments.

AN EMPIRICAL ASSESSMENT OF USER ONLINE SECURITY BEHAVIOR: EVIDENCE FROM A UNIVERSITY

The ever-increasing number and severity of cybersecurity breaches makes it vital to understand the factors that make organizations vulnerable. Since humans are considered the weakest link in the cybersecurity chain of an organization, this study evaluates users’ individual differences (demographic factors, risk-taking preferences, decision-making styles and personality traits) to understand online security behavior. This thesis studies four different yet tightly related online security behaviors that influence organizational cybersecurity: device securement, password generation, proactive awareness and updating. A survey (N=369) of students, faculty and staff in a large mid-Atlantic U.S. public university identifies individual characteristics that relate to online security behavior and characterizes the higher-risk individuals that pose threats to the university’s cybersecurity. Based on these findings and insights from interviews with phishing victims, the study concludes with recommendations to help similat organizations increase end-user cybersecurity compliance and mitigate the risks caused by humans in the organizational cybersecurity chain.

The Ecology of Urbanization: A Study of Soil Microbial Community Rosponse

Urbanization is associated with global biodiversity loss of macrophauna and flora through direct and indirect mechanisms, but to date few studies have examined urban soil microbes. Although there are numerous studies on the influence of agricultural management on soil microbial community composition, there has been no global-scale study of human control over urban soil microbial communities. This thesis extends the literature of urban ecology to include soil microbial communities by analyzing soils that are part of the Global Urban Soil Ecology and Education Network (GLUSEEN). Chapter 1 sets the context for urban ecology; Chapters 2 addresses patterns of community assembly, biodiversity loss, and the phylogenetic relationships among community members; Chapter 3 addresses the metabolic pathways that characterize microbial communities existing under different land-uses across varying geographic scales; and Chapter 4 relates Chapter 2 and 3 to one another and to evolutionary theory, tackling assumptions that are particular to microbial ecology.

MULTI-UNIT ACCIDENT CONTRIBUTIONS TO U.S. NUCLEAR REGULATORY COMMISSION QUANTITATIVE HEALTH OBJECTIVES: A SAFETY GOAL POLICY ANALYSIS USING MODELS FROM STATE-OF-THE-ART REACTOR CONSEQUENCE ANALYSES

The U.S. Nuclear Regulatory Commission implemented a safety goal policy in response to the 1979 Three Mile Island accident. This policy addresses the question “How safe is safe enough?” by specifying quantitative health objectives (QHOs) for comparison with results from nuclear power plant (NPP) probabilistic risk analyses (PRAs) to determine whether proposed regulatory actions are justified based on potential safety benefit. Lessons learned from recent operating experience—including the 2011 Fukushima accident—indicate that accidents involving multiple units at a shared site can occur with non-negligible frequency. Yet risk contributions from such scenarios are excluded by policy from safety goal evaluations—even for the nearly 60% of U.S. NPP sites that include multiple units. This research develops and applies methods for estimating risk metrics for comparison with safety goal QHOs using models from state-of-the-art consequence analyses to evaluate the effect of including multi-unit accident risk contributions in safety goal evaluations.

TRAFFIC IMPACT ANALYSIS OF SEVERAL DYNAMIC LANE MANAGEMENT STRATEGIES FOR CONGESTION MITIGATION BASED ON DTA MODEL

Persistent daily congestion has been increasing in recent years, particularly along major corridors during selected periods in the mornings and evenings. On certain segments, these roadways are often at or near capacity. However, a conventional Predefined control strategy did not fit the demands that changed over time, making it necessary to implement the various dynamical lane management strategies discussed in this thesis. Those strategies include hard shoulder running, reversible HOV lanes, dynamic tolls and variable speed limit. A mesoscopic agent-based DTA model is used to simulate different strategies and scenarios. From the analyses, all strategies aim to mitigate congestion in terms of the average speed and average density. The largest improvement can be found in hard shoulder running and reversible HOV lanes while the other two provide more stable traffic. In terms of average speed and travel time, hard shoulder running is the most congested strategy for I-270 to help relieve the traffic pressure.

ENHANCEMENT OF THERMAL INACTIVATION OF CRONOBACTER SAKAZAKII WITH INCLUSION OF PARABENS

Parabens are a family of p-hydroxybenzoic acid esters, which have antimicrobial activity over a broad pH range (4-8). This study was designed to evaluate the enhanced thermal inactivation of Cronobacter sakazakii by the inclusion of “parabens” and to ultimately develop mathematical models to describe this effect. A heat-resistant strain, Cronobacter sakazakii 607, was heated at three mild heating temperatures in combination with treatments with five parabens in various concentrations. Results showed the presence of parabens significantly enhanced thermal inactivation in a concentration-dependent manner, and the effect increased with increasing alkyl chain length. The concentration of parabens, alkyl side chain length, and heating temperature acted synergistically, causing bacterial inactivation even at low temperatures that were not effective in killing C. sakazakii. The survival data were used to develop primary and secondary mathematical models that accurately describe how this synergistic activity can be applied in the food industry.