Hydrogeology, Chemical Characteristics, and Transport Processes in the Zone of Contribution of a Public-Supply Well in York, Nebraska

In 2001, the U.S. Geological Survey, as part of the National Water Quality Assessment (NAWQA) Program, initiated a topical study of Transport of Anthropogenic and Natural Contaminants (TANC) to PSW (public-supply wells). Local-scale and regional-scale TANC study areas were delineated within selected NAWQA study units for intensive study of processes effecting transport of contaminants to PSWs. This report describes results from a local-scale TANC study area at York, Nebraska, within the High Plains aquifer, including the hydrogeology and geochemistry of a 108-square-kilometer study area that contains the zone of contribution to a PSW selected for study (study PSW), and describes factors controlling the transport of selected anthropogenic and natural contaminants to PSWs.

Enhanced Polymer Grafting from Multiwalled Carbon Nanotubes through Living Anionic Surface-Initiated Polymerization

Anionic surface-initiated polymerization of ethylene oxide and styrene has been performed using multiwalled carbon nanotubes (MWNTs) functionalized with anionic initiators. The surface of MWNTs was modified via covalent attachment of precursor anions such as 4-hydroxyethyl benzocyclobutene (BCBEO) and 1-benzocyclobutene-1′-phenylethylene (BCB-PE) through Diels-Alder cycloaddition at 235 °C. Surface-functionalized MWNTs-g-(BCB-EO) n and MWNTs-g-(BCB-PE) n with 23 and 54 wt % precursor initiators, respectively, were used for the polymerizations. Alkoxide anion on the surface of MWNTs-g-(BCB-EO) n was generated through reaction with potassium triphenylmethane for the polymerization of ethylene oxide in tetrahydrofuran and phenyl substituted alkyllithium was generated from the surface of MWNTs-g-(BCB-PE) n using sec-butyllithium for the polymerization of styrene in benzene. In both cases, the initiation was found to be very slow because of the heterogeneous reaction medium. However, the MWNTs gradually dispersed in the reaction medium during the polymerization. A pale green color was noticed in the case of ethylene oxide polymerization and the color of initiator as well as the propagating anions was not discernible visually in styrene polymerization. Polymer grafted nanocomposites, MWNTs-g-(BCB-PEO) n and MWNTs-g-(BCB-PS) n containing a very high percentage of hairy polymer with a small fraction of MWNTs (<1 wt %) were obtained. The conversion of ethylene oxide and the weight percent of PEO on the surface of the MWNTs increased with increasing reaction time indicating a controlled polymerization. The polymer-grafted MWNTs were characterized using FTIR, 1H NMR, Raman spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and transmission electron microscopy (TEM). Size exclusion chromatography of the polymer grafted MWNTs revealed broad molecular weight distributions (1.3 < Mw/Mn < 1.8) indicating the presence of different sizes of polymer nanocomposites. The TEM images showed the presence of thick layers of polymer up to 30 nm around the MWNTs. The living nature of the growing polystyryllithium was used to produce diblock copolymer grafts using sequential polymerization of isoprene on the surface of MWNTs.

Well-Defined Poly(4-vinylbenzocyclobutene): Synthesis by Living Anionic Polymerization and Characterization

Living anionic polymerization of 4-vinylbenzocylobutene was performed in benzene at room temperature using sec-butyllithium as the initiator. Results of the kinetic studies indicated the termination- and transfer-free nature of the polymerization. Homopolymers with predictable molecular weights and narrow molecular weight distributions were produced, excluding the interference of the cyclobutene rings during initiation and propagation. Thermogravimetric analysis of poly(4-vinylbenzocyclobutene) in air showed a small weight gain at ~200 °C, a rapid decomposition at ~455 °C, and a gradual decomposition at ~566 °C. This behavior was attributed to the formation of radicals from the pendent benzocyclobutene functionality through o-quinodimethane intermediates and simultaneous decomposition/cross-linking reactions at high temperature. The living nature of the polymerization was also examined via sequential copolymerization with butadiene to form diblock copolymers.

Translocation of nine-banded armadillos

During the last 150 years, nine-banded armadillos (Dasypus novemcinctus) have increased their range and abundance in the southeastern United States. When foraging, armadillos cause damage to agricultural crops as, as well as cause structural damage to driveways and foundations. Homeowners frequently use translocation to reduce local armadillo abundance. Despite its popularity with the general public, however, the appropriateness of nuisance wildlife translocation presents concerns for biologists. Our objective was to address some of these concerns by examining survival and movements of translocated armadillos. We translocated 12 armadillos (9 male, 3 female) equipped with radio-transmitters and compared their survival and movements to that of 29 (11 male, 18 female) resident armadillos. Most (92%) of the translocated animals dispersed from their release site within the fi rst few days after release. Resident armadillos generally maintained stable home ranges. We found evidence that translocated animals were abl to return to their original capture sites. We, therefore, recommend against translocating nuisance armadillos.

An Artesian Well System in Beaver Crossing, Nebraska- It's Development and Demise

ABSTRACT Nebraska has a veritable wealth of groundwater. The High Plains Aquifer underlies most of the state, and within its sand and gravel deposits, many interconnected aquifers provide fresh water for a variety of uses. One of the most spectacular examples of this resource is the artesian well. Beaver Crossing, Nebraska was once home to one of the most prolific artesian systems in the state before its demise. Founded in the 1880’s, Beaver Crossing soon became known for its many artesian wells, that provided leisure activities and supported profitable business ventures such as small farming, ice production and aquiculture. Eventually these wells would dry up and the town of Beaver Crossing would never see the level of commerce and activity that it saw during its early years. I decided to research this subject because I lived in Beaver Crossing for twelve years. While I lived there I heard stories about the artesian wells, the nationally recognized lily pond, and the large public pool fed by underground water that was plentiful around town. I was interested in knowing what happened to the water, the wells, the pool and businesses. . . And, in the wake of their disappearance, what happened to the town. To research this topic I looked at accounts of the history of Seward County and Beaver Crossing. I also studied the basic geology underlying the Great Plains, as well as local geology and issues pertaining to groundwater levels, such as rainfall amounts, drought and irrigation. As irrigation became a factor in rural Nebraska and through several documented droughts, groundwater levels all over the state declined. At the same time the artesian system in Beaver Crossing all but disappeared.