10 resultados para Corn - Drying
em DigitalCommons@University of Nebraska - Lincoln
Resumo:
Corn is Nebraska's most important crop. Of the nearly 19 million acres under cultivation in the state, over 10 million acres or more than 50 percent is normally planted to corn. This is three times the acreage of wheat, four times that of oats, and ten times that of barley. The 10-year average acre yield of corn for this state is 25.8 bushels compared with 26.9 bushels for the entire United States. Nebraska, with an average annual crop of approximately 258 million bushels, usually ranks third among all states in the total production of corn, being exceeded by Iowa and Illinois. This 1933 extension circular discusses the importance of corn, seed, varieties of corn, freezing injury, testing seed corn, hybrid corn, soil fertility and rotation, cultural practices, harvesting and storing corn, power machinery in relation to costs in corn production, corn diseases and insects, and utilization of corn.
Resumo:
Raising Less Corn, More Hell may sound like a rallying cry for the nation's heartland farmers, but this well-written series of essays by George Pyle is meant for those who eat corn. Or rather, for those of us who eat the livestock fed on corn in confined animal feeding operations, then wash down those meals with drinks high in high-fructose corn syrups. Pyle, an editorial writer from Kansas now living in Utah, brings his journalist's skills to bear on what our industrial food system has brought us. It's not appetizing as he makes his case against a corporate-controlled system that doesn't have to be this way.
Resumo:
Maize demand for food, livestock feed, and biofuel is expected to increase substantially. The Western U.S. Corn Belt accounts for 23% of U.S. maize production, and irrigated maize accounts for 43 and 58% of maize land area and total production, respectively, in this region. The most sensitive parameters (yield potential [YP], water-limited yield potential [YP-W], yield gap between actual yield and YP, and resource-use efficiency) governing performance of maize systems in the region are lacking. A simulation model was used to quantify YP under irrigated and rainfed conditions based on weather data, soil properties, and crop management at 18 locations. In a separate study, 5-year soil water data measured in central Nebraska were used to analyze soil water recharge during the non-growing season because soil water content at sowing is a critical component of water supply available for summer crops. On-farm data, including yield, irrigation, and nitrogen (N) rate for 777 field-years, was used to quantify size of yield gaps and evaluate resource-use efficiency. Simulated average YP and YP-W were 14.4 and 8.3 Mg ha-1, respectively. Geospatial variation of YP was associated with solar radiation and temperature during post-anthesis phase while variation in water-limited yield was linked to the longitudinal variation in seasonal rainfall and evaporative demand. Analysis of soil water recharge indicates that 80% of variation in soil water content at sowing can be explained by precipitation during non-growing season and residual soil water at end of previous growing season. A linear relationship between YP-W and water supply (slope: 19.3 kg ha-1 mm-1; x-intercept: 100 mm) can be used as a benchmark to diagnose and improve farmer’s water productivity (WP; kg grain per unit of water supply). Evaluation of data from farmer’s fields provides proof-of-concept and helps identify management constraints to high levels of productivity and resource-use efficiency. On average, actual yields of irrigated maize systems were 11% below YP. WP and N-fertilizer use efficiency (NUE) were high despite application of large amounts of irrigation water and N fertilizer (14 kg grain mm-1 water supply and 71 kg grain kg-1 N fertilizer). While there is limited scope for substantial increases in actual average yields, WP and NUE can be further increased by: (1) switching surface to pivot systems, (2) using conservation instead of conventional tillage systems in soybean-maize rotations, (3) implementation of irrigation schedules based on crop water requirements, and (4) better N fertilizer management.
Resumo:
During ethanol production, starch is the primary nutrient fermented and the remaining byproducts are excellent sources of fiber and protein. In addition, inclusion of byproducts in finishing diets may reduce the incidence of acidosis. As a result, roughage level and quality could potentially be reduced in finishing diets containing byproducts. Three experiments were conducted to examine the effects of roughage and wet corn gluten feed (WCGF) in finishing cattle diets containing corn distillers grains plus solubles. Cattle fed finishing diets containing wet distillers grains plus solubles (WDGS) with no roughage had decreased DMI and ADG compared to cattle fed roughage. Within roughage level, ADG was similar for cattle fed alfalfa hay, corn silage or corn stalks when included on an equal NDF basis. Apparent total tract digestibility of OM, NDF, and CP linearly decreased and ruminal pH variables increased linearly due to increasing roughage levels. Roughage sources can be exchanged on an equal NDF basis in beef finishing diets containing 30% WDGS (DM basis). In finishing diets containing modified distillers grains plus solubles (MDGS), DMI linearly increased due to increasing roughage levels but ADG responded quadratically and was lowest for cattle fed diets without roughage. There was also a quadratic response for DMI and ADG due to WCGF inclusion level. Gain:feed decreased linearly with increasing roughage and WCGF inclusion levels. Feeding 15% WCGF resulted in similar cattle performance and carcass traits to cattle fed no WCGF in diets containing 30% MDGS, but cattle fed diets with 60% total byproduct inclusion made up of 30% WCGF and 30% MDGS had reduced performance (DM basis). Additionally, reducing corn silage inclusion level to 7.5% resulted in similar finishing cattle performance and carcass traits to cattle fed 15% corn silage in diets containing 30% MDGS with or without inclusion of WCGF. Elimination of roughage in diets containing either WDGS or MDGS resulted in negative impacts on finishing cattle performance, ruminal metabolism, and carcass traits.
Resumo:
Trade liberalization policies in Guatemala have impacted agricultural production. This thesis focuses on how trade liberalization has happened, what have been the impacts at a national level and describes how a community has adapted to the implementation of these policies. The implementation of trade was influenced by several, international and national institutions. Among the international institutions are the World Bank, the World Trade Organization and the United States Agency for International Development. At the national level the institutions that have partaken in shaping the trade policies are the military and the owners of capital and labor. The implementation of trade policies at a national level has affected national corn prices, population level diets and to some extent reduced poverty levels. At a local level trade liberalization policies have impacted land holdings, increased intensification of agriculture, including agrochemical, machinery and crop plantations per year, and consumption rates of corn have been affected. Maximization of the benefits and minimization of the detrimental effects can happen with the implementation of policies that promote food security, improve access to health and education, and prevent environmental and human health consequences from the intensification of agriculture and at the same time continue with the production of non-traditional agricultural products.
Resumo:
Grain marketing decisions are among the toughest the farm owner/operator or manager must make. Grain producers store grain to speculate on receiving higher prices, earn a return above storage costs, or to take advantage of government programs. Prices must increase enough to cover the additional costs, or forward contract prices must exceed current prices by more than the cost of storage in order to justify forward pricing. The gain in prices received can come from both changes in price level and changes in basis. This research publication discusses all the areas of the cost of grain storage.
Resumo:
Corn Suitability ratings have been used for many years in other parts of the Corn Belt as an agronomic measure of soil productivity, and in turn, some correlation with associated cropland values. For example, in Iowa the Corn Suitability Rating (CSR) is used extensively as a measure of soil productivity across regions and counties, and even down to parcel levels. Google on Iowa CSR, and you will find weighted average CSRs for each county, as well as private firms offering detailed analysis of CSR for any parcel of land in the state. The intent is to provide an index (between 5 and 100) of potential yields for row crop production.
Resumo:
This NebGuide describes the two common spider mites found in Nebraska corn and soybeans, their natural enemies and management. Two species of spider mites, the Banks grass mite and twospotted spider mite, commonly feed on Nebraska corn. Banks grass mites (BGM) feed almost exclusively on grasses, including corn and sorghum. Twospotted spider mites (TSM) not only feed on many species of grasses, but also on soybeans, fruit trees and a variety of vegetables and ornamental plants. Although these two species are somewhat similar in appearance, they differ in several biological characteristics and in their susceptibility to pesticides. Banks grass mites usually appear earlier in the season, feed mostly on the lower leaves of the corn plant, and in Nebraska are moderately susceptible to many of the commonly used miticides. On the other hand, TSM tend to appear in mid to late season, increase rapidly, feed over the entire plant, and often are not consistently controlled by available pesticides.
Resumo:
"How large a sample is needed to survey the bird damage to corn in a county in Ohio or New Jersey or South Dakota?" Like those in the Bureau of Sport Fisheries and Wildlife and the U.S.D.A. who have been faced with a question of this sort we found only meager information on which to base an answer, whether the problem related to a county in Ohio or to one in New Jersey, or elsewhere. Many sampling methods and rates of sampling did yield reliable estimates but the judgment was often intuitive or based on the reasonableness of the resulting data. Later, when planning the next study or survey, little additional information was available on whether 40 samples of 5 ears each or 5 samples of 200 ears should be examined, i.e., examination of a large number of small samples or a small number of large samples. What information is needed to make a reliable decision? Those of us involved with the Agricultural Experiment Station regional project concerned with the problems of bird damage to crops, known as NE-49, thought we might supply an ans¬wer if we had a corn field in which all the damage was measured. If all the damage were known, we could then sample this field in various ways and see how the estimates from these samplings compared to the actual damage and pin-point the best and most accurate sampling procedure. Eventually the investigators in four states became involved in this work1 and instead of one field we were able to broaden the geographical base by examining all the corn ears in 2 half-acre sections of fields in each state, 8 sections in all. When the corn had matured well past the dough stage, damage on each corn ear was assessed, without removing the ear from the stalk, by visually estimating the percent of the kernel surface which had been destroyed and rating it in one of 5 damage categories. Measurements (by row-centimeters) of the rows of kernels pecked by birds also were made on selected ears representing all categories and all parts of each field section. These measurements provided conversion factors that, when fed into a computer, were applied to the more than 72,000 visually assessed ears. The machine now had in its memory and could supply on demand a map showing each ear, its location and the intensity of the damage.
Resumo:
In 1966, when the annual damage survey was initiated, Dr. C. R. Weaver, Statistician at the Ohio Agriculture Research and Development Center, Wooster, Ohio, drew up a sampling plan, balancing costs against desired precision. The plan included three combinations of fields to be sampled and stations per field for high damage areas, three combinations for moderate damage areas, and two combinations for light damage areas. Alternatives for the high damage area included (1) 497 fields with two stations per field (± .48), (2) 775 fields with two stations per field (± .26), and (3) 235 fields with ten stations per field (— .68). For the moderate damage areas, the alternatives were (1) 441 fields with three stations per field (± .26), (2) 155 fields with three stations per field (± .50), and (3) 235 fields with ten stations per field (± .32). The light dam¬age area alternatives were (1) 297 fields with three stations per field (- .26), and (2) 81 fields with three stations per field (± .50). The original survey in 1966 sampled eight counties in three regions. In 1967, 14 counties in the same three regions were sampled. Two new counties were added to one region and two new regions with two counties each (treated as one region for sampling purposes) were added to the 1968 survey. The 1968 survey was of sufficient size to be representative of the corn damage picture in Ohio and Southeast Michigan. The 1969 survey was identical to the 1968 survey.