22 resultados para 769999 Other Environmental aspects
em DigitalCommons@University of Nebraska - Lincoln
Resumo:
PREPARATION OF COATED MICROTOOLS FOR ELECTROCHEMICAL MACHINING APPLICATIONS Ajaya K. Swain, M.S. University of Nebraska, 2010 Advisor: K.P. Rajurkar Coated tools have improved the performance of both traditional and nontraditional machining processes and have resulted in higher material removal, better surface finish, and increased wear resistance. However, a study on the performance of coated tools in micromachining has not yet been adequately conducted. One possible reason is the difficulties associated with the preparation of coated microtools. Besides the technical requirement, economic and environmental aspects of the material and the coating technique used also play a significant role in coating microtools. This, in fact, restricts the range of coating materials and the type of coating process. Handling is another major issue in case of microtools purely because of their miniature size. This research focuses on the preparation of coated microtools for pulse electrochemical machining by electrodeposition. The motivation of this research is derived from the fact that although there were reports of improved machining by using insulating coatings on ECM tools, particularly in ECM drilling operations, not much literature was found relating to use of metallic coating materials in other ECM process types. An ideal ECM tool should be good thermal and electrical conductor, corrosion resistant, electrochemically stable, and stiff enough to withstand electrolyte pressure. Tungsten has almost all the properties desired in an ECM tool material except being electrochemically unstable. Tungsten can be oxidized during machining resulting in poor machining quality. Electrochemical stability of a tungsten ECM tool can be improved by electroplating it with nickel which has superior electrochemical resistance. Moreover, a tungsten tool can be coated in situ reducing the tool handling and breakage frequency. The tungsten microtool was electroplated with nickel with direct and pulse current. The effect of the various input parameters on the coating characteristics was studied and performance of the coated microtool was evaluated in pulse ECM. The coated tool removed more material (about 28%) than the uncoated tool under similar conditions and was more electrochemical stable. It was concluded that nickel coated tungsten microtool can improve the pulse ECM performance.
Resumo:
Abstract The goal of this study was to conduct a comparative analysis of three university recycling programs. This study looked at several aspects of the programs that included the diversion rates, per capita ratios of materials recycled and disposed, and the average net costs of waste disposal and waste diversion. The universities included in this study were the University of Nebraska-Lincoln, the University of Colorado at Boulder, and the University of Oregon. To gather the information necessary for this analysis, I contacted each of the university’s recycling coordinators. To determine the average net costs of waste disposal and waste diversion I requested both the recycling budget and solid waste budget from each university for the fiscal years of interest which included: 2006-2007, 2007-2008, and 2008-2009. To calculate the diversion rates and per capita ratios, I requested performance records from each university listing the tonnage of materials recycled and disposed for the same years. This study’s findings reported that the average net costs for waste diversion in all three universities were $22-$122 less per ton than costs for waste collection and disposal. This study also indicated that the universities with the highest diversion and recycling rates were the University of Colorado at Boulder and the University of Oregon. The university with the lowest waste generated per capita was the University of Oregon followed by the University of Nebraska-Lincoln.
Resumo:
Abstract The purpose of this research was to study the sex distribution and energy allocation of dioecious Eastern Red Cedars (Juniperus virginiana) along an environmental resource gradient. The trees surveyed were growing in a canyon located at the University of Nebraska’s Cedar Point Biological Research Station in Ogallala, Nebraska. Due to the geography of this canyon, environmental factors necessary for plant growth should vary depending on the tree’s location within the canyon. These factors include water availability, sun exposure, ground slope, and soil nitrogen content, all of which are necessary for carbon acquisition. Juniperus virginiana is a dioecious conifer. Dioecious plants maintain male and female reproductive structures on separate individuals. Therefore, proximal spatial location is essential for pollination and successful reproduction. Typically female reproductive structures are more costly and require a greater investment of carbon and nitrogen. For this reason, growth, survival and successful reproduction are more likely to be limited by environmental resources for females than for male individuals. If this is true for Juniperus virginiana, females should be located in more nutrient and water rich areas than males. This also assumes that females can not be reproductively successful in areas of poor environmental quality. Therefore, reproductive males should be more likely to inhabit environments with relatively lower resource availability than females. Whether the environment affects sexual determination or just limits survival of different sexes is still relatively unknown. In order to view distribution trends along the environmental gradient, the position of the tree in the canyon transect was compared to its sex. Any trend in sex should correspond with varying environmental factors in the canyon, ie: sunlight availability, aspect, and ground slope. The individuals’ allocation to growth and reproduction was quantified first by comparing trunk diameter at six inches above ground to sex and location of the tree. The feature of energy allocation was further substantiated by comparing carbon and nitrogen content in tree leaf tissue and soil to location and sex of each individual. Carbon and nitrogen in soil indicate essential nutrient availability to the individual, while C and N in leaf tissue indicate nutrient limitation experienced by the tree. At the conclusion of this experiment, there is modest support that survival and fecundity of females demands environments relatively richer in nutrients, than needed by males to survive and be reproductively active. Side of the canyon appeared to have an influence on diameter of trees, frequency of sex and carbon and nitrogen leaf content. While this information indicated possible trends in the relation of sex to nutrient availability, most of the environmental variables presumed responsible for the sex distribution bias differed minutely and may not have been biologically significant to tree growth.
Resumo:
Abstract The goal of this project is to evaluate the effectiveness of bioswells in protecting water quality from urban runoff. The hypothesis tested in this project is that water in bioswells improves water quality. Water quality in both a bioswell and an underground concrete lined ditch, both containing ground and surface water, were tested for certain water quality parameters. These parameters consisted of: Dissolved Oxygen, pH, water temperature, weather temperature, Total Dissolved Solids, Specific Conductivity, Alkalinity, Total Dissolved Carbon, Chemical Oxygen Demand, and depth and width of the sampling site. An additional contaminant that was looked at was motor oil. This was measured by comparing Total Organic Carbon with Chemical Oxygen Demand. A variety of different methods to measure the water quality parameters were utilized. The concrete site had more stable readings, but much higher water temperatures. However, the bioswell water is mainly from surface water runoff, and the underground concrete lined pipe is from underground water, so the two cannot be directly compared. The bioswell had high readings, especially pertaining to Oxygen Demand, Total Organic Carbon, and Specific Conductivity in early test dates. But, these readings improved as they were filtered though the bioswell. As plant activity increased and the weather began to warm up there were more stable readings. It is concluded that bioswells are an effective way to reduce problems associated with urban runoff pertaining to certain water quality parameters.
Resumo:
Abstract Small-scale coffee producers worldwide remain vulnerable to price fluctuations after the 1999-2003 coffee crisis. One way to increase small-scale farmer economic resilience is to produce a more expensive product, such as quality coffee. There is growing demand in coffee-producing and coffee-importing countries for user-friendly tools that facilitate the marketing of quality coffee. The purpose of this study is to develop a prototypical quality coffee marketing tool in the form of a GIS model that identifies regions for producing quality coffee in a country not usually associated with quality coffee, Honduras. Maps of areas for growing quality coffee were produced with information on climate, soils, topography, areas vulnerable to environmental degradation, the location of current quality coffee farms, and infrastructure. The maps depict suitable coffee-growing land in portions of eight western Honduran departments.
Resumo:
Abstract. Based on prior field observations, we hypothesized that individual and interacting effects of plant size, density, insect herbivory, and especially fungal disease, influenced seedling and juvenile plant growth in native Platte thistle populations (Cirsium canescens Nutt.). We worked at Arapaho Prairie in the Nebraska Sandhills (May - August 2007), monitoring plant growth, insect damage, and fungal infection within different density thistle patches. In the main experiment, we sprayed half of test plants in different density patches with fungicide (Fungonil© Bonide, containing chlorothalonil) and half with a water control. Fungal infection rates were very low, so we found no difference in fungal attack between these treatments. However, plants that received the fungicide treatment had significantly faster growth over the season than did the control plants. At the same time, plants in the fungicide treatment had significantly reduced insect herbivory. These results strongly suggest that the fungicide had insecticidal effects and that insect herbivory significantly decreases juvenile Platte thistle growth. Further, damage by insect herbivores tended to be higher for larger plants, and herbivory was variable among different patches. However, plant density did not appear to have a large effect on the amount of insect herbivory that individual juvenile Platte thistle plants received. In the second experiment, we examined germination and survival success in relationship to seed density, and found that germination success was higher in areas of lower seed density. In the third experiment, we tested germination for filled seeds categorized primarily by color variation and size, and found no difference in germination related to either color or seed weight. We conclude that seed density, but not seed quality as estimated by color or size, affects germination success. Further, although herbivory was not significantly affected by plant density at any of the scales examined, insect herbivory significantly reduces the growth and success of juveniles of this characteristic native sand prairie plant.
Resumo:
Research has provided no definitive answers on whether PET plastic bottles or aluminum cans are a more environmentally sustainable choice as soda containers. This paper researches the fuel used in recycling each of these materials from Yellowstone National Park to processing locations. The data is used to determine which of these alternatives use less fuel in this process. It was found that plastics use more fuel when transported from Yellowstone National Park to the processing center. Aluminum uses less fuel per ton to transport from Yellowstone to the processing center. The conclusions from this research may have implications on which material would be advised to use in selling soda in Yellowstone National Park.
Resumo:
An eco-house or zero-energy house is not a new concept- houses with extremely low impact on their surroundings and good use of local resources have been around for centuries. This particular eco-house is designed to offer full modern services and comforts while consuming very low energy and few expensive building materials. Ideally, someone would be able to use this thesis as a blueprint for actual construction.
Resumo:
ABSTRACT Riparian buffer zones are important sites of biodiversity, sediment trapping, pollutant removal, and hydrologic regulation that have significant implications for both people and wildlife. Urbanization’s influence on and need for adequate water quality increases the need for careful planning in regards to riparian areas. Wildlife are key components in the ecosystem functions of riparian zones and require consideration in peri-urban planning as well. This study reviews relevant literature to determine the recommended minimum riparian buffer width for maintaining water quality and habitat along Stevens Creek in Lincoln, Nebraska. Only sources that listed a specific purpose related to water quality and habitat for their buffer width recommendations were considered. The study found that the baseline buffer width recommended for Stevens Creek that would be adequate for both water quality maintenance and basic habitat is 50 ft (15 m) per side. This number may be modified based on other factors such as slope, soil particle size, adjacent land use, the presence of certain wildlife communities, stream size, and stream order.
Resumo:
ABSTRACT: As a secondary sexual trait that can increase reproductive success, ornamentation is believed to be costly for organisms to acquire and possess. This study investigates possible costs of ornamentation on wolf spider foraging by comparing foraging abilities of two male forms that differ in ornamentation upon maturation. The two male forms, found syntopically in a mixed population in Mississippi, USA, resemble two sibling species: Schizocosa ocreata, in which males develop large black brushes on their forelegs upon maturation, and Schizocosa rovneri, in which males lack ornamentation following maturation. Individuals of both forms participated in foraging trials as penultimates (juveniles) and as matures. Analyses were conducted to compare behaviors and determine changes in foraging abilities between male forms (non-ornamented vs. brush-legged) and between age groups (penultimate vs. mature). Most foraging behaviors of the two male forms during immaturity were similar with the exception that brush-legged males attacked more frequently than non-ornamented males. Brush-legged males attacked less, spent more time moving, and improved capture abilities as matures, while non-ornamented males retained similar trends for these behaviors with age. Additionally, while capture abilities improved with age among brush-legged males, killing abilities remained constant. This disparity was due to increased escapes made by captured prey items, possibly due to hindrances caused by brush presence preventing secure holds onto crickets. In summary, differences in foraging exist between brush-legged and non-ornamented males prior to sexual maturation, and the development of/presence of brushes appears to influence adult male foraging efficiency.
Resumo:
Abstract Emerald Ash Borer (Agrilus planipennis) (EAB) is an invasive insect pest. It feeds on the cambium tissues of ash tree species. It was first discovered in the United States in 2002 in Detroit, Michigan. Their effects on ash trees are deadly, and it is quickly spreading across the Midwest. Nebraska has not yet been invaded, but confirmed findings continue getting closer and closer. The major problem facing Nebraskans, with regards to EAB, is how to begin preparations to prevent a dramatic economic loss when an infestation does occur. So, to address this problem, I have conducted street and park tree inventories, to determine the amount of ash trees that are contained in Nebraska’s community forests; and with that data I have attempted to create a possible EAB action plan for Nebraska communities. Based on inventory findings, I have calculated that 6% of Nebraska’s community trees are ash, which is a large percentage. Then, I proposed a plan of action for communities that involve planting a diverse landscape, and a combination of ash replacement programs, and treatment for ash that are less valuable or damaged.
Resumo:
ABSTRACT This thesis will determine if there is a discrepancy between how literature defines conservation, preservation, and restoration, and how natural resource professionals define these terms. Interviews were conducted with six professionals from six different agencies that deal with natural resources. These agencies consisted of both government and non-government groups. In addition to interviewing these professionals regarding how they define the terms, they were asked where their work fits into the context of these terms. The interviewees’ responses were then compared with the literature to determine inconsistencies with the use of these terms in the literature and real world settings. The literature and the interviewees have agreed on the term conservation. There are some different points of view about preservation, some see it as ‘no management’ and some others see it as keeping things the same or ‘static.’ Restoration was the term where both the literature and professionals thought of moving an ecosystem from one point of succession or community, to another point on a continuum. The only thing in which they disagree on is the final goal of a restoration project. The literature would suggest restoring the ecosystem to a past historic condition, where the interviewees said to restore it to the best of their abilities and to a functioning ecosystem.
Resumo:
Abstract The purpose of this thesis was to investigate the relationship between bicycle ridership and bike racks in a given area. The goal was to discern whether or not the density of bike racks determines the number of riders in the area. I predicted that there would be higher ridership in the areas with a denser bike rack concentration. To investigate this point, I set up five different areas of varying sizes with a similar number of bike racks, and then observed them over a period of 5 business days. By using a simple tally of the bikes found on the racks and bikes locked to other objects, like railings, I collected data in the area during the day when there were likely to be many commuter bikes parked outside. The results show that there is a positive relationship between the density of bike racks in a given area and bike ridership. While there is a positive r-value, more data collection needs to be done to determine the relationship that may exist between bike ridership and bike racks.
Resumo:
Abstract Yellowstone National Park is located over a hot spot under the North American tectonic plate and holds a potentially explosive super-volcano that has the ability to cause deadly consequences on the North American continent. After an eruption the surrounding region would see the greatest devastation, covered by pyroclastic deposits and thick ash fall exterminating most all life and destroying all structures in its path. In landscapes of greater distance from the event the consequences will be less dramatic yet still substantial. Records of previous eruption data from the Yellowstone super-volcano show that the ash fall out from the eruption can cover areas as large as one million square kilometers and could leave Nebraska covered in ash up to 10 centimeters thick. This would cause destruction of agriculture, extensive damage to structures, decreased temperatures, and potential respiratory hazards. The effects of volcanic ash on the human respiratory system have been shown to cause acute symptoms from heavy exposure. Symptoms include nasal irritation, throat irritation, coughing, and if preexisting conditions are present some can develop bronchial symptoms, which can last for a few days. People with bronchitis and asthma are shown to experience airway irritation and uncomfortable breathing. In most occurrences, exposure of volcanic ash is too short to cause long-term health hazards. Wearing facial protection can alleviate much of the symptoms. Most of the long-term ramifications of the eruption will be from the atmospheric changes caused from disruption of solar radiation, which will affect much of the global population. The most pertinent concerns for Nebraska citizens are from the accumulation of ash deposits over the landscape and the climatic perturbations. Potential mitigation procedures are essential to prepare our essentially unaware population of the threat that they may soon face if the volcano continues on its eruption cycle.
Resumo:
Abstract Rain gardens are an important tool in reducing the amount of stormwater runoff and accompanying pollutants from entering the city’s streams and lakes, and reducing their water quality. This thesis project analyzed the number of rain gardens installed through the City of Lincoln Nebraska Watershed Management’s Rain Garden Water Quality Project in distance intervals of one-eighth mile from streams and lakes. This data shows the distribution of these rain gardens in relation to streams and lakes and attempts to determine if proximity to streams and lakes is a factor in homeowners installing rain gardens. ArcGIS was used to create a map with layers to determine the number of houses with rain gardens in 1/8 mile distance increments from the city’s streams and lakes and their distances from a stream or lake. The total area, number of house parcels, and the type and location of each parcel type were also determined for comparison between the distance interval increments. The study revealed that fifty-eight percent of rain gardens were installed within a quarter mile of a stream or lake (an area covering 60% of the city and including 58.5% of the city’s house parcels), and that eighty percent of rain gardens were installed within three-eighth mile of streams or lakes (an area covering 75% of the city and 78.5% of the city’s house parcels). All parcels in the city are within 1 mile of a stream or lake. Alone the number of project houses per distance intervals suggested that proximity to a stream or lake was a factor in people’s decisions to install rain gardens. However, when compared to the number of house parcels available, proximity disappears as a factor in project participation.