Husker Feed Grains and Soybean Conference

Thank you for inviting me to speak with you today. It is a pleasure to be here. I look forward to working with you in the days ahead; in fact, I look forward “to attending” this conference in the future and knowing many of you by name.

An Intercomparison of Regional Atmospheric Circulation and the Melt Season Loss of Arctic Snow Cover and Sea Ice Extent Across the Land-Ocean Boundary

This study is designed to compare the monthly continental snow cover and sea ice extent loss in the Arctic with regional atmospheric conditions including: mean sea level pressure, 925 hPa air temperature, and mean wind direction among others during the melt season (March-August) over the 29-year study period 1979-2007. Little research has gone into studying the concurrent variations in the annual loss of continental snow cover and sea ice extent across the land-ocean boundary, since these data are largely stored in incompatible formats. However, the analysis of these data, averaged spatially over three autonomous study regions located in Siberia, North America, and Western Russia, reveals a distinct difference in the response of snow and sea ice to the atmospheric forcing. On average, sea ice extent is lost earlier in the year, in May, than snow cover, in June, although Arctic sea ice is located farther north than continental snow in all three study regions. Once the loss of snow and ice extent begins, snow cover is completely removed sooner than sea ice extent, even though ice loss begins earlier in the melt season. Further, the analysis of the atmospheric conditions surrounding loss of snow and ice cover over the independent study regions indicates that conditions of cool temperatures with strong northeasterly winds in the later melt season months are effective at removing sea ice cover, likely through ice divergence, as are warmer temperatures via southerly winds directly forcing melt. The results of this study set the framework for further analysis of the direct influence of snow cover loss on later melt season sea ice extents and the predictability of snow and sea ice extent responses to modeled future climate conditions

QUANTITATIVE TRAIT LOCI FOR AGRONOMIC AND END-USE QUALITY PERFORMANCE AND THE EFFECT OF SOILBORNE WHEAT MOSAIC VIRUS IN A HARD WINTER WHEAT POPULATION IN NEBRASKA

To better understand agronomic and end-use quality in wheat (Triticum aestivum L.) we developed a population containing 154 F6:8 recombinant inbred lines (RILs) from the cross TAM107-R7/Arlin. The parental lines and RILs were phenotyped at six environments in Nebraska and differed for resistance to Wheat soilborne mosaic virus (WSBMV), morphological, agronomic, and end-use quality traits. Additionally, a 2300 cM genome-wide linkage map was created for quantitative trait loci (QTL) analysis. Based on our results across multiple environments, the best RILs could be used for cultivar improvement. The population and marker data are publicly available for interested researchers for future research. The population was used to determine the effect of WSBMV on agronomic and end-use quality and for the mapping of a resistance locus. Results from two infected environments showed that all but two agronomic traits were significantly affected by the disease. Specifically, the disease reduced grain yield by 30% of susceptible RILs and they flowered 5 d later and were 11 cm shorter. End-use quality traits were not negatively affected but flour protein content was increased in susceptible RILs. The resistance locus SbmTmr1 mapped to 27.1 cM near marker wPt-5870 on chromosome 5DL using ELISA data. Finally, we investigated how WSBMV affected QTL detection in the population. QTLs were mapped at two WSBMV infected environments, four uninfected environments, and in the resistant and susceptible RIL subpopulations in the infected environments. Fifty-two significant (LOD≥3) QTLs were mapped in RILs at uninfected environments. Many of the QTLs were pleiotropic or closely linked at 6 chromosomal regions. Forty-seven QTLs were mapped in RILs at WSBMV infected environments. Comparisons between uninfected and infected environments identified 20 common QTLs and 21 environmentally specific QTLs. Finally, 24 QTLs were determined to be affected by WSBMV by comparing the subpopulations in QTL analyses within the same environment. The comparisons were statistically validated using marker by disease interactions. These results showed that QTLs can be affected by WSBMV and careful interpretation of QTL results is needed where biotic stresses are present. Finally, beneficial QTLs not affected by WSBMV or the environment are candidates for marker-assisted selection.

Growth and Characterization of Silicon Carbide Thin Films Using a Nontraditional Hollow Cathode Sputtering Technique

Silicon carbide (SiC) is considered a suitable candidate for high-power, high-frequency devices due to its wide bandgap, high breakdown field, and high electron mobility. It also has the unique ability to synthesize graphene on its surface by subliming Si during an annealing stage. The deposition of SiC is most often carried out using chemical vapor deposition (CVD) techniques, but little research has been explored with respect to the sputtering of SiC. Investigations of the thin film depositions of SiC from pulse sputtering a hollow cathode SiC target are presented. Although there are many different polytypes of SiC, techniques are discussed that were used to identify the film polytype on both 4H-SiC substrates and Si substrates. Results are presented about the ability to incorporate Ge into the growing SiC films for the purpose of creating a possible heterojunction device with pure SiC. Efforts to synthesize graphene on these films are introduced and reasons for the inability to create it are discussed. Analysis mainly includes crystallographic and morphological studies about the deposited films and their quality using x-ray diffraction (XRD), reflection high energy electron diffraction (RHEED), transmission electron microscopy (TEM), scanning electron microscopy (SEM), atomic force microscopy (AFM), Auger electron spectroscopy (AES) and Raman spectroscopy. Optical and electrical properties are also discussed via ellipsometric modeling and resistivity measurements. The general interpretation of these analytical experiments indicates that the films are not single crystal. However, the majority of the films, which proved to be the 3C-SiC polytype, were grown in a highly ordered and highly textured manner on both (111) and (110) Si substrates.

HIGH TEMPERATURE RARE EARTH COMPOUNDS: SYNTHESIS, CHARACTERIZATION AND APPLICATIONS IN DEVICE FABRICATION

As the area of nanotechnology continues to grow, the development of new nanomaterials with interesting physical and electronic properties and improved characterization techniques are several areas of research that will be remain vital for continued improvement of devices and the understanding in nanoscale phenomenon. In this dissertation, the chemical vapor deposition synthesis of rare earth (RE) compounds is described in detail. In general, the procedure involves the vaporization of a REClx (RE = Y, La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho) in the presence of hydride phase precursors such as decaborane and ammonia at high temperatures and low pressures. The vapor-liquid-solid mechanism was used in combination with the chemical vapor deposition process to synthesize single crystalline rare earth hexaboride nanostructures. The crystallographic orientation of as-synthesized rare earth hexaboride nanostructures and gadolinium nitride thin films was controlled by judicious choice of specific growth substrates and modeled by analyzing x-ray diffraction powder patterns and crystallographic models. The rare earth hexaboride nanostructures were then implemented into two existing technologies to enhance their characterization capabilities. First, the rare earth hexaboride nanowires were used as a test material for the development of a TEM based local electrode atom probe tomography (LEAP) technique. This technique provided some of the first quantitative compositional information of the rare earth hexaboride systems. Second, due to the rigidity and excellent conductivity of the rare earth hexaborides, nanostructures were grown onto tungsten wires for the development of robust, oxidation resistant nanomanipulator electronic probes for semiconductor device failure analysis.

Measurement, Simulation, and Analysis of the Mechanical Response of Railroad Track

Increased railroad traffic volumes, speeds, and axle loads have created a need to better measure track quality. Previous research has indicated that the vertical track deflection provides a meaningful indicator of track integrity. The measured deflection can be related to the bending stresses in the rail as well as characterize the mechanical response of the track. This investigation summarizes the simulation, analysis and development of a measurement system at the University of Nebraska (UNL) to measure vertical track deflection in real-time from a car moving at revenue speeds. The UNL system operates continuously over long distances and in revenue service. Using a camera and two line lasers, the system establishes three points of the rail shape beneath the loaded wheels and over a distance of 10 ft. The resulting rail shape can then be related to the actual bending stress in the rail and estimate the track support through beam theory. Finite element simulations are used to characterize the track response as related to the UNL measurement system. The results of field tests using bondable resistance strain gages illustrate the system’s capability of approximating the actual rail bending stresses under load.

Student Leader LMX Relationships as Moderated by Constructive-Developmental Theory

This study examined how the quality of Leader-Member Exchange (LMX) relationships was moderated by the Constructive-Developmental stage or Order of Consciousness of both leader and follower. Using student organization presidents and officers on a small, private, liberal arts college campus in the Midwest, the researcher used a sample of 37 students to study the impact developmental stage had on the leadership relationship. Using the Leader Member Exchange-Multi-Dimensional Measure (LMX-MDM), four dimensions of LMX were examined. The four dimensions were Affect, Contribution, Loyalty and Professional Respect. There was no significant relationship between Order of Consciousness and quality of LMX relationship. While there was no significant difference in LMX relationship based on gender of participants, there was a significant difference between how male presidents and officers perceived their relationship in the Loyalty dimension. Directions for further research and implications for practice were discussed.

A Survery of Western United States Instream Flow Programs and The Policies that Protect a River's Ecosystem

The Western United States can best be described as a vast, varying land, with the high plains to the east and the jagged horizons of Rockies to the west. However there is one common trait shared by these states: the lack of water resources. With the continued development of this land, the fact that water is scarce is becoming more real. This issue became more difficult to handle as the public became more aware that many competing uses existed for the finite resource, and those different uses were degrading the natural environments of the surface waters. With this realization instream flow policies provides a comprehensive account of the policy framework a selected number of western states have established in order to protect instream flows and the overall health of a river's ecosystem. Also included is the identification of key policies that should be promoted or removed from a state's instream flow program. Ultimately, this thesis continues to add the the ever-evolving process of modernizing water law frameworks.

Constructability Testing of Folded Plate Girders

A new steel girder bridge system was developed at the University of Nebraska. The innovative girder design is a box girder folded from a single steel plate that has a trapezoid shape with an opening on the bottom. The girder has application in short span bridges and accelerated construction situations. The structural performance of the girder requires investigation in all stages of a bridge’s lifecycle. This thesis contains descriptions and results from the first two tests from a series of tests developed to evaluate this new girder shape. The objective of these two tests was to investigate the constructability of the girders. During construction a bridge is in its least stable condition and it is important that the bridge components exhibit both adequate strength and stability during this critical stage. To this end, two girders were tested in flexure over a simple span as a non-composite beam simulating the loading the girders would be subjected to during construction. The results of the two tests indicate that the folded girder as a whole, and its components, provide adequate strength and stability at construction load levels. Failure occurred at loads that were above normal construction load levels and resulted in a ductile failure mode, which is a well documented benefit of steel components. The girders remained stable through all phases of loading including failure. The top flange was the weakest component of the beam during construction due to its role as a compression element that has a slender and un-braced form. The compression in the top flange caused local buckling in the top flange even at elastic load levels. This was the cause for loss of stiffness and failure in both specimens. Incorporation of a ridge at the center of the top flange of specimens, results of which are not reported in this thesis, proved to resolve this very early buckling issue.

Class Notes for Math 871: General Topology, Instructor Jamie Radcliffe

Topics include: Topological space and continuous functions (bases, the product topology, the box topology, the subspace topology, the quotient topology, the metric topology), connectedness (path connected, locally connected), compactness, completeness, countability, filters, and the fundamental group.

DEVELOPMENTAL STATUS OF N-(3-CHLORO-4-METHYLPHENYL) ACETAMIDE AS A CANDIDATE BLACKBIRD/STARLING ROOST TOXICANT

Large winter roosts of blackbirds (Icteridae) and starlings (Sturnus vulgaris) often cause conflicts, both real and imagined, between the birds and local human popula- tions. These conflicts may range from objections to the noise and odor engendered by thousands or millions of birds, to fear of epidemic human and livestock diseases, and the possibility of economic losses from crop depredations. Many people believe the most direct way to combat these conflicts is to reduce local roosting populations by kill- ing the birds. In response to this perceived need for a roost toxicant, the U.S. Fish and Wildlife Service (FWS) developed PA-14, a surfactant which can be aerially applied to problem roosts for population reduction (Lefebvre and Seubert 1970). Successful use of this material, however, requires concurrent rainfall and low temperatures, conditions which may not occur sufficiently often to permit roost treatment at desired times or places. Because of this difficulty, and continued pressures from management person- nel and the agricultural community, the Service has continued its search for a safe, ef- fective roost toxicant usable without severe weather restrictions. One of the current candidate materials is N-(3-chloro-4-methylphenyl)acetamide (CAT, DRC-2698), a derivative of StarlicideR (DRC-1339). This compound was initially developed by S.A. Peoples of the University of California-Davis (Peoples et al. 1976). California researchers are still investigating the avicidal potential of CAT, mainly on baits and in wick perches, while FWS interest has centered thus far on its possible utility as an aerially applied roost treatment. This report is a summary of our investigations to date.

A Study of Interdisciplinary Research Needs: Results from Input of Faculty in Six Engineering Departments in Prioritizing Serial Subscriptions

Baldwin, Virginia (2003) "A Study of Interdisciplinary Research Needs: Results from Input of Faculty in Six Engineering Departments in Prioritizing Serial Subscriptions," American Society for Engineering Education Conference, June 23, 2003, Nashville, TN,

Parental Ethnotheories of Child Development: Looking Beyond Independence and Individualism in American Belief Systems

Over the past several decades, the topic of child development in a cultural context has received a great deal of theoretical and empirical investigation. Investigators from the fields of indigenous and cultural psychology have argued that childhood is socially and historically constructed, rather than a universal process with a standard sequence of developmental stages or descriptions. As a result, many psychologists have become doubtful that any stage theory of cognitive or socialemotional development can be found to be valid for all times and places. In placing more theoretical emphasis on contextual processes, they define culture as a complex system of common symbolic action patterns (or scripts) built up through everyday human social interaction by means of which individuals create common meanings and in terms of which they organize experience. Researchers understand culture to be organized and coherent, but not homogenous or static, and realize that the complex dynamic system of culture constantly undergoes transformation as participants (adults and children) negotiate and re-negotiate meanings through social interaction. These negotiations and transactions give rise to unceasing heterogeneity and variability in how different individuals and groups of individuals interpret values and meanings. However, while many psychologists—both inside and outside the fields of indigenous and cultural psychology–are now willing to give up the idea of a universal path of child development and a universal story of parenting, they have not necessarily foreclosed on the possibility of discovering and describing some universal processes that underlie socialization and development-in-context. The roots of such universalities would lie in the biological aspects of child development, in the evolutionary processes of adaptation, and in the unique symbolic and problem-solving capacities of the human organism as a culture-bearing species. For instance, according to functionalist psychological anthropologists, shared (cultural) processes surround the developing child and promote in the long view the survival of families and groups if they are to demonstrate continuity in the face of ecological change and resource competition, (e.g. Edwards & Whiting, 2004; Gallimore, Goldenberg, & Weisner, 1993; LeVine, Dixon, LeVine, Richman, Leiderman, Keefer, & Brazelton, 1994; LeVine, Miller, & West, 1988; Weisner, 1996, 2002; Whiting & Edwards, 1988; Whiting & Whiting, 1980). As LeVine and colleagues (1994) state: A population tends to share an environment, symbol systems for encoding it, and organizations and codes of conduct for adapting to it (emphasis added). It is through the enactment of these population-specific codes of conduct in locally organized practices that human adaptation occurs. Human adaptation, in other words, is largely attributable to the operation of specific social organizations (e.g. families, communities, empires) following culturally prescribed scripts (normative models) in subsistence, reproduction, and other domains [communication and social regulation]. (p. 12) It follows, then, that in seeking to understand child development in a cultural context, psychologists need to support collaborative and interdisciplinary developmental science that crosses international borders. Such research can advance cross-cultural psychology, cultural psychology, and indigenous psychology, understood as three sub-disciplines composed of scientists who frequently communicate and debate with one another and mutually inform one another’s research programs. For example, to turn to parental belief systems, the particular topic of this chapter, it is clear that collaborative international studies are needed to support the goal of crosscultural psychologists for findings that go beyond simply describing cultural differences in parental beliefs. Comparative researchers need to shed light on whether parental beliefs are (or are not) systematically related to differences in child outcomes; and they need meta-analyses and reviews to explore between- and within-culture variations in parental beliefs, with a focus on issues of social change (Saraswathi, 2000). Likewise, collaborative research programs can foster the goals of indigenous psychology and cultural psychology and lay out valid descriptions of individual development in their particular cultural contexts and the processes, principles, and critical concepts needed for defining, analyzing, and predicting outcomes of child development-in-context. The project described in this chapter is based on an approach that integrates elements of comparative methodology to serve the aim of describing particular scenarios of child development in unique contexts. The research team of cultural insiders and outsiders allows for a look at American belief systems based on a dialogue of multiple perspectives.

Adopting an integrated, flexible approach to reducing the birdstrike risk from Canada geese

Canada Geese overflying the runways at London’s Heathrow Airport have been struck on eleven occasions by aircraft during the last ten years. Four of these occurred during the pre-breeding season and seven during the post moult period. A monitoring study was initiated in 1999 to evaluate the movements of geese around the airport and determine appropriate mitigation strategies to reduce the risk of birdstrike. Moult sites within 13km of the airport were identified. 4,900 moulting geese were caught and fitted with colour rings and radio-transmitters between 1999 and 2004. 2,500 visits were made to over 300 sites resulting in over 10,000 sightings of known individuals. Birds that crossed the airport approaches whilst moving between roost sites and feeding areas in newly harvested cereal crops were identified. Throughout the monitoring period efforts were made to control the risk, but by 2003 it was estimated that 10,000 bird transits of the approaches involving almost 700 individuals occurred during a 50 day period. The knowledge of the movements of ringed and tagged birds was used to inform a revised habitat management, daily roost dispersal and on-airfield bird deterrence programme in 2004. By adopting a flexible approach to management, an estimated 70% reduction in bird transits was achieved. This paper discusses the techniques used to achieve this reduction.

Review of: Solving the Mysteries of the Dead Sea Scrolls: New Light on the Bible, by Edward M. Cook

Edward M. Cook's new book makes an excellent addition to the growing list of "introductions" to the Dead Sea Scrolls. Aimed primarily at a Christian lay and clerical audience, it succeeds admirably in leading its readers through the labyrinthine world of Scroll scholarship and controversy. The book divides itself into two uneven parts. In the first part, chapters 1-4, Cook deals with the discovery of the Scrolls in 1947 and the subsequent history of their decipherment and (often delayed) publication. Cook's treatment of this controversial topic is the most fair and evenhanded I have ever read; he has done meticulous research, reading many accounts of the Scrolls, from Edmund Wilson's in the 1950's to the latest journal articles from 1993. The result is a highly readable account of the finding and purchase of the Scrolls, the appointment of an international team of scholars to decipher and publish them, the delays in publication (including the results of the Six Day War in 1967, when most of the Scroll fragments fell into Israeli hands), and the controversy surrounding then editor-in-chief John Strugnell and the release of the photographs in the late 1980's and early 1990's. Cook is objective and fair throughout, but particularly striking is his sympathetic portrayal of the original seven member editorial team.