An Efficient Scheduling Scheme For On-Demand Lightpath Reservations In Reconfigurable WDM Optical Networks

We propose an efficient scheduling scheme that optimizes advance-reserved lightpath services in reconfigurable WDM networks. A re-optimization approach is devised to reallocate network resources for dynamic service demands while keeping determined schedule unchanged.

Maximizing Resource Sharing in WDM Mesh Networks With Path-Based Protection and Sparse OEO Regeneration

We propose a resource-sharing scheme that supports three kinds of sharing scenarios in a WDM mesh network with path-based protection and sparse OEO regeneration. Several approaches are used to maximize the sharing of wavelength-links and OEO regenerators.

An Analytical Model for Virtual Topology Reconfiguration in Optical Networks and A Case Study

An analytical model for Virtual Topology Reconfiguration (VTR) in optical networks is developed. It aims at the optical networks with a circuit-based data plane and an IPlike control plane. By identifying and analyzing the important factors impacting the network performance due to VTR operations on both planes, we can compare the benefits and penalties of different VTR algorithms and policies. The best VTR scenario can be adaptively chosen from a set of such algorithms and policies according to the real-time network situations. For this purpose, a cost model integrating all these factors is created to provide a comparison criterion independent of any specific VTR algorithm and policy. A case study based on simulation experiments is conducted to illustrate the application of our models.

Dynamic Routing in Translucent WDM Optical Networks

Translucent WDM optical networks use sparse placement of regenerators to overcome the impairments and wavelength contention introduced by fully transparent networks, and achieve a performance close to fully opaque networks with much less cost. Our previous study proved the feasibility of translucent networks using sparse regeneration technique. We addressed the placement of regenerators based on static schemes allowing only fixed number of regenerators at fixed locations. This paper furthers the study by proposing a suite of dynamical routing schemes. Dynamic allocation, advertisement and discovery of regeneration resources are proposed to support sharing transmitters and receivers between regeneration and access functions. This study follows the current trend in optical networking industry by utilizing extension of IP control protocols. Dynamic routing algorithms, aware of current regeneration resources and link states, are designed to smartly route the connection requests under quality constraints. A hierarchical network model, supported by the MPLS-based control plane, is also proposed to provide scalability. Experiments show that network performance is improved without placement of extra regenerators.

Dynamic traffic grooming algorithms for reconfigurable SONET over WDM networks

The emergence of Wavelength Division Multiplexing (WDM) technology provides the capability for increasing the bandwidth of Synchronous Optical Network (SONET) rings by grooming low-speed traffic streams onto different high-speed wavelength channels. Since the cost of SONET add-drop multiplexers (SADM) at each node dominates the total cost of these networks, how to assign the wavelength, groom in the traffic and bypass the traffic through the intermediate nodes has received a lot of attention from researchers recently.

Climate Change and Water Resources Management: A Federal Perspective

Many challenges, including climate change, face the Nation’s water managers. The Intergovernmental Panel on Climate Change (IPCC) has provided estimates of how climate may change, but more understanding of the processes driving the changes, the sequences of the changes, and the manifestation of these global changes at different scales could be beneficial. Since the changes will likely affect fundamental drivers of the hydrological cycle, climate change may have a large impact on water resources and water resources managers. The purpose of this interagency report prepared by the U.S. Geological Survey (USGS), U.S. Army Corps of Engineers (USACE), Bureau of Reclamation (Reclamation), and National Oceanic and Atmospheric Administration (NOAA) is to explore strategies to improve water management by tracking, anticipating, and responding to climate change. The key points below briefly summarize the chapters in this report and represent underlying assumptions needed to address the many impacts of climate change.

Differences between Tethered Polyelectrolyte Chains on Bare Mica and Hydrophobically Modified Mica

This study investigates the structures of layers of amphiphilic diblock copolymers of poly(t-butyl styrene)-poly- (styrene sulfonate) (PtBS-PSS) adsorbed on both the bare mica surface (hydrophilic) and an octadecyltriethoxysilane (OTE)-modified mica surface (hydrophobic). When the surface is rendered hydrophobic, the nonsoluble block exhibits stronger interaction with the surface and higher adsorbed masses are achieved. Interaction forces between two such adsorbed layers on both substrates were measured using the surface forces apparatus. The effect of salt concentration (Cs) and molecular weight (N) on the height of the self-assembled layers (L0) was examined in each case. The resulting scaling relationship is in good agreement with predictions of the brush model, L0 ∞ N1.0 in the low-salt limit and L0N-1 ∞ (Cs/σ)-0.32 in the salted regime, when adsorption takes place onto the hydrophobized mica surface. For adsorption on the bare mica surface, L0N-0.7 ∞ Cs -0.17 agrees with the scaling prediction of the sparse tethering model. The results suggest that, on the hydrophilic bare mica surface, the adsorbed amount is not high enough to form a brush structure and only very little intermolecular stretching of the tethered chains occurs; in contrast, the presence of the hydrophobic OTE layer increases the tethering density such that the polyelectrolyte chains adopt a brush conformation.

Enhanced Polymer Grafting from Multiwalled Carbon Nanotubes through Living Anionic Surface-Initiated Polymerization

Anionic surface-initiated polymerization of ethylene oxide and styrene has been performed using multiwalled carbon nanotubes (MWNTs) functionalized with anionic initiators. The surface of MWNTs was modified via covalent attachment of precursor anions such as 4-hydroxyethyl benzocyclobutene (BCBEO) and 1-benzocyclobutene-1′-phenylethylene (BCB-PE) through Diels-Alder cycloaddition at 235 °C. Surface-functionalized MWNTs-g-(BCB-EO) n and MWNTs-g-(BCB-PE) n with 23 and 54 wt % precursor initiators, respectively, were used for the polymerizations. Alkoxide anion on the surface of MWNTs-g-(BCB-EO) n was generated through reaction with potassium triphenylmethane for the polymerization of ethylene oxide in tetrahydrofuran and phenyl substituted alkyllithium was generated from the surface of MWNTs-g-(BCB-PE) n using sec-butyllithium for the polymerization of styrene in benzene. In both cases, the initiation was found to be very slow because of the heterogeneous reaction medium. However, the MWNTs gradually dispersed in the reaction medium during the polymerization. A pale green color was noticed in the case of ethylene oxide polymerization and the color of initiator as well as the propagating anions was not discernible visually in styrene polymerization. Polymer grafted nanocomposites, MWNTs-g-(BCB-PEO) n and MWNTs-g-(BCB-PS) n containing a very high percentage of hairy polymer with a small fraction of MWNTs (<1 wt %) were obtained. The conversion of ethylene oxide and the weight percent of PEO on the surface of the MWNTs increased with increasing reaction time indicating a controlled polymerization. The polymer-grafted MWNTs were characterized using FTIR, 1H NMR, Raman spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and transmission electron microscopy (TEM). Size exclusion chromatography of the polymer grafted MWNTs revealed broad molecular weight distributions (1.3 < Mw/Mn < 1.8) indicating the presence of different sizes of polymer nanocomposites. The TEM images showed the presence of thick layers of polymer up to 30 nm around the MWNTs. The living nature of the growing polystyryllithium was used to produce diblock copolymer grafts using sequential polymerization of isoprene on the surface of MWNTs.

Hydatid Disease in Boreal Regions

It is the purpose of this paper to review the status of hydatid disease (caused by Echinococcus spp.) in the boreal regions of the world. Its importance has long been recognized in Eurasian countries, but only during recent years have investigators added anything significant to the knowledge of hydatid disease in North America. There is need to disseminate up-to-date information among medical workers in Canada and Alaska, where the disease is endemic in northern regions having a large aboriginal population. Therefore, particular emphasis will be placed on the situation in boreal North America.

The Raccoon, a New Host for Microphallus sp., with Additional Notes on M. ovatus from Turtles

Discusses the raccoon, a new host for Microphallus sp., with additional notes on M. ovatus from turtles.

Well-Defined Poly(4-vinylbenzocyclobutene): Synthesis by Living Anionic Polymerization and Characterization

Living anionic polymerization of 4-vinylbenzocylobutene was performed in benzene at room temperature using sec-butyllithium as the initiator. Results of the kinetic studies indicated the termination- and transfer-free nature of the polymerization. Homopolymers with predictable molecular weights and narrow molecular weight distributions were produced, excluding the interference of the cyclobutene rings during initiation and propagation. Thermogravimetric analysis of poly(4-vinylbenzocyclobutene) in air showed a small weight gain at ~200 °C, a rapid decomposition at ~455 °C, and a gradual decomposition at ~566 °C. This behavior was attributed to the formation of radicals from the pendent benzocyclobutene functionality through o-quinodimethane intermediates and simultaneous decomposition/cross-linking reactions at high temperature. The living nature of the polymerization was also examined via sequential copolymerization with butadiene to form diblock copolymers.

Spatial Relationships Among Young Cercocarpus ledifolius (Curlleaf Mountain Ylahogany)

This study analyzed spatial location patterns of Cercocarpus ledifolius Nutt. (curlleaf mountain mahogany) plants, classified as current-year seedling, established seedling, juvenile, and immature individuals, at a central Nevada study site. Most current-year seedlings were located in mahogany stands in which large, mature individuals had the greatest abundance. These stands had greater litter cover and a thicker layer of litter than areas with few current- year seedlings. Most established young Cercocarpus were located in adjacent Artemisia tridentata ssp. vaseyana (mountain big sagebrush) communities, or in infrequent canopy gaps between relatively few large, mature Cercocarpus. We discuss potential roles of plant litter, root growth characteristics, nurse plants, and herbivory in the establishment and renewal of Cercocarpus communities.

Western Balsam Bark Beetle, Dryocoetes confusus Swaine, Flight Periodicity in Northern Utah

The flight periodicity of western balsam bark beetle (Dryocoetes confusus Swaine) in Big Cottonwood Canyon, Utah, was studied during the summer months of 1992, 1993, and 1994. Contents of baited funnel traps were tallied by species up to 3 times weekly. Two main periods of flight activity were observed each year. The first and, generally, largest occurred in early summer soon after flight was initiated for the season. A 2nd period was observed in late summer, generally August. Timing of the 2 periods was influenced by unusually warm or cool weather in each study year. The 1st period had more males than females while the 2nd period had a majority of females. Except during periods of cool or wet weather, western balsam bark beetles were found to be active at least at minimal levels from June through September.

Cuticular Hydrocarbons as Chemotaxonomic Characters for Nasutitermes corniger (Motschulsky) and N. ephratae (Holmgren) (Isoptera: Termitidae)

Forty-four cuticular hydrocarbon components from workers of the termites Nasutitermes corniger (Motschulsky) and N. ephratae (Holmgren) from three localities in Panama were characterized by capillary gas chromatography-electron impact mass spectrometry. Both species contain qualitatively identical homologous series of n-alkanes; 2-, 3-, 11-,13-,14-, and 15-methylalkanes; 11,15-, 12,16-, and 13,17-dimethylalkanes; and 11,15,19- and 13, 17,21-trimethylalkanes. Both species also contain a single alkene, 9-hentriacontene. The two species, however, are readily distinguished chemically by differences among the relative abundances of 11 of their major hydrocarbon components.

Novel Relapsing Fever Spirochete in Bat Tick

Tick-borne relapsing fever in western North America is a zoonosis caused by spirochetes in the genus Borrelia that are transmitted by argasid ticks of the genus Ornithodoros (1). Human disease occurs in many focal areas and is associated with infections of Borrelia hermsii, B. turicatae, and possibly B. parkeri (2,3). Although the ecologic parameters that maintain B. hermsii and B. turicatae differ, human infections usually occur in rustic cabins (B. hermsii) and caves (B. turicatae) inhabited by ticks and their terrestrial vertebrate hosts (1). Recently, Gill et al. (4) provided evidence that the argasid bat tick, Carios kelleyi, feeds upon humans. Subsequently, Loftis et al. (5) used PCR analysis and DNA sequencing to detect in C. kelleyi an unidentifi ed Borrelia species that was closely related to B. turicatae and B. parkeri.