Leading Safety Indicators: Proactively Monitoring Safety Performance

Traditional measures or indicators of workplace safety performance reflect unrecognized hazards, unsafe conditions, reckless behavior, and other safety program shortcomings only after a worker is injured or falls ill. In contrast to traditional or lagging indicators, leading indicators can predict poor safety performance to ensure that safety program failings are addressed before an occupational injury or illness actually occurs. This Capstone Project identified a variety of proactive safety management practices, policies, and activities shown to have a positive impact on workplace safety as leading safety indicators. The end result is a comprehensive framework of leading safety indicators that employers can use to proactively gauge safety program performance and address unrecognized hazards, unsafe conditions, reckless behavior, and other safety program deficiencies.

Oxide Semiconductors For Organic Opto-electronic Devices

Development of transparent oxide semiconductors (TOS) from Earth-abundant materials is of great interest for cost-effective thin film device applications, such as solar cells, light emitting diodes (LEDs), touch-sensitive displays, electronic paper, and transparent thin film transistors. The need of inexpensive or high performance electrode might be even greater for organic photovoltaic (OPV), with the goal to harvest renewable energy with inexpensive, lightweight, and cost competitive materials. The natural abundance of zinc and the wide bandgap ($sim$3.3 eV) of its oxide make it an ideal candidate. In this dissertation, I have introduced various concepts on the modulations of various surface, interface and bulk opto-electronic properties of ZnO based semiconductor for charge transport, charge selectivity and optimal device performance. I have categorized transparent semiconductors into two sub groups depending upon their role in a device. Electrodes, usually 200 to 500 nm thick, optimized for good transparency and transporting the charges to the external circuit. Here, the electrical conductivity in parallel direction to thin film, i.e bulk conductivity is important. And contacts, usually 5 to 50 nm thick, are optimized in case of solar cells for providing charge selectivity and asymmetry to manipulate the built in field inside the device for charge separation and collection. Whereas in Organic LEDs (OLEDs), contacts provide optimum energy level alignment at organic oxide interface for improved charge injections. For an optimal solar cell performance, transparent electrodes are designed with maximum transparency in the region of interest to maximize the light to pass through to the absorber layer for photo-generation, plus they are designed for minimum sheet resistance for efficient charge collection and transport. As such there is need for material with high conductivity and transparency. Doping ZnO with some common elements such as B, Al, Ga, In, Ge, Si, and F result in n-type doping with increase in carriers resulting in high conductivity electrode, with better or comparable opto-electronic properties compared to current industry-standard indium tin oxide (ITO). Furthermore, improvement in mobility due to improvement on crystallographic structure also provide alternative path for high conductivity ZnO TCOs. Implementing these two aspects, various studies were done on gallium doped zinc oxide (GZO) transparent electrode, a very promising indium free electrode. The dynamics of the superimposed RF and DC power sputtering was utilized to improve the microstructure during the thin films growth, resulting in GZO electrode with conductivity greater than 4000 S/cm and transparency greater than 90 %. Similarly, various studies on research and development of Indium Zinc Tin Oxide and Indium Zinc Oxide thin films which can be applied to flexible substrates for next generation solar cells application is presented. In these new TCO systems, understanding the role of crystallographic structure ranging from poly-crystalline to amorphous phase and the influence on the charge transport and optical transparency as well as important surface passivation and surface charge transport properties. Implementation of these electrode based on ZnO on opto-electronics devices such as OLED and OPV is complicated due to chemical interaction over time with the organic layer or with ambient. The problem of inefficient charge collection/injection due to poor understanding of interface and/or bulk property of oxide electrode exists at several oxide-organic interfaces. The surface conductivity, the work function, the formation of dipoles and the band-bending at the interfacial sites can positively or negatively impact the device performance. Detailed characterization of the surface composition both before and after various chemicals treatment of various oxide electrode can therefore provide insight into optimization of device performance. Some of the work related to controlling the interfacial chemistry associated with charge transport of transparent electrodes are discussed. Thus, the role of various pre-treatment on poly-crystalline GZO electrode and amorphous indium zinc oxide (IZO) electrode is compared and contrasted. From the study, we have found that removal of defects and self passivating defects caused by accumulation of hydroxides in the surface of both poly-crystalline GZO and amorphous IZO, are critical for improving the surface conductivity and charge transport. Further insight on how these insulating and self-passivating defects cause charge accumulation and recombination in an device is discussed. With recent rapid development of bulk-heterojunction organic photovoltaics active materials, devices employing ZnO and ZnO based electrode provide air stable and cost-competitive alternatives to traditional inorganic photovoltaics. The organic light emitting diodes (OLEDs) have already been commercialized, thus to follow in the footsteps of this technology, OPV devices need further improvement in power conversion efficiency and stable materials resulting in long device lifetimes. Use of low work function metals such as Ca/Al in standard geometry do provide good electrode for electron collection, but serious problems using low work-function metal electrodes originates from the formation of non-conductive metal oxide due to oxidation resulting in rapid device failure. Hence, using low work-function, air stable, conductive metal oxides such as ZnO as electrons collecting electrode and high work-function, air stable metals such as silver for harvesting holes, has been on the rise. Devices with degenerately doped ZnO functioning as transparent conductive electrode, or as charge selective layer in a polymer/fullerene based heterojunction, present useful device structures for investigating the functional mechanisms within OPV devices and a possible pathway towards improved air-stable high efficiency devices. Furthermore, analysis of the physical properties of the ZnO layers with varying thickness, crystallographic structure, surface chemistry and grain size deposited via various techniques such as atomic layer deposition, sputtering and solution-processed ZnO with their respective OPV device performance is discussed. We find similarity and differences in electrode property for good charge injection in OLEDs and good charge collection in OPV devices very insightful in understanding physics behind device failures and successes. In general, self-passivating surface of amorphous TCOs IZO, ZTO and IZTO forms insulating layer that hinders the charge collection. Similarly, we find modulation of the carrier concentration and the mobility in electron transport layer, namely zinc oxide thin films, very important for optimizing device performance.

Three Dichotomies in Lawyers’ Ethics (With Particular Attention to the Corporation as Client)

Three usually unexpressed, and too often unnoticed, conceptual dichotomies underlie our perception and understanding of lawyers’ ethics. First, the existence of a special body of professional ethics and professional regulation presupposes some special need or risk. Criminal and civil law are apparently insufficient. Ordinary day-to-day morality and ordinary ethics, likewise, are not considered to be enough. What is the risk entailed by the notion of a profession that is special; who needs protection, and from what? Two quite different possible answers to this question provide the first of the three dichotomies examined in this article: one can understand the risk as primarily to a vulnerable client from a powerful professional; or, to the contrary, from a powerful client-lawyer combination toward vulnerable others. Second, what is the foundational orientation of lawyers? Are lawyers serving primarily their particular clients, and those clients’ preferences, choices and autonomy? Or is the primary allegiance of lawyers to some community or collective goal or interest distinct from the particular goals or interests of the client? The third dichotomy concerns not the substance of the risk, or the primary orientation, but the appropriate means of responding to that risk or that fundamental obligation. Should professional ethics be implemented primarily through rules? Or, should we rely on character and the discretion of lawyers to make a thought out, all things considered, decision? Each of these three presents a fundamental difference in how we perceive and address issues of lawyers’ ethics. Each affects our understanding and analysis on multiple levels, from (1) determining the appropriate or requisite conduct in a particular situation, to (2) framing a specific rule or approach for a particular category of situations, to (3) more general or abstract theory or policy. A person’s inclinations in regard to the dichotomies affects the conclusions that person will reach on each of those levels of analysis, yet those inclinations and assumptions are frequently unexamined and unarticulated. One’s position on each of the dichotomies tends to structure the approach and outcome without the issues and choice having been explicitly addressed or possibly even noticed. This article is an effort to ameliorate that problem. Part I addresses the question of what is the risk in the work of lawyers, or the function of lawyers, for which professional ethics is the answer. The concluding section focuses on the particular problem of the corporation as client. Part II then asks the related and possibly consequent question of what is the foundational orientation or allegiance of the lawyer? Is it to the individual client? Or is it to some larger community interest? Again, the concluding section focuses on the corporation. Part III turns to the means or method for addressing the obligations and possible problems of the professional ethics of lawyers. Should lawyers’ ethics guide and confine the conduct of lawyers primarily through rules? Or should it function primarily through reliance on the knowledge, judgment and character of lawyers? If the latter were the guide, ethical decisions would be made on a situation by situation basis under the discretion of each lawyer. Toward the end of each discussion possibilities for bridging the dichotomy are considered (and with such bridges each dichotomy may come to look more like a spectrum or continuum.). At several points after its introduction in Parts I and II, the special problem of the corporation as client is revisited and possible solutions suggested. Illustrating the usefulness of keeping the dichotomies in view, Part IV applies them to several exemplary situations of ethical difficulty in actual lawyer practice. For readers finding it difficult to envision the consequences of these distinctions, turning ahead to Part IV may be useful in making the discussion more concrete. Some commonalities across the dichotomies and connections among them are then developed in the concluding section, Part V.

Three Dichotomies in Lawyers’ Ethics (With Particular Attention to the Corporation as Client)

Three usually unexpressed, and too often unnoticed, conceptual dichotomies underlie our perception and understanding of lawyers’ ethics. First, the existence of a special body of professional ethics and professional regulation presupposes some special need or risk. Criminal and civil law are apparently insufficient. Ordinary day-to-day morality and ordinary ethics, likewise, are not considered to be enough. What is the risk entailed by the notion of a profession that is special; who needs protection, and from what? Two quite different possible answers to this question provide the first of the three dichotomies examined in this article: one can understand the risk as primarily to a vulnerable client from a powerful professional; or, to the contrary, from a powerful client-lawyer combination toward vulnerable others. Second, what is the foundational orientation of lawyers? Are lawyers serving primarily their particular clients, and those clients’ preferences, choices and autonomy? Or is the primary allegiance of lawyers to some community or collective goal or interest distinct from the particular goals or interests of the client? The third dichotomy concerns not the substance of therisk, or the primary orientation, but the appropriate means of responding to that risk or that fundamental obligation. Should professional ethics be implemented primarily through rules? Or, should we rely on character and the discretion of lawyers to make a thought out, all things considered, decision? Each of these three presents a fundamental difference in how we perceive and address issues of lawyers’ ethics. Each affects our understanding and analysis on multiple levels, from (1) determining the appropriate or requisite conduct in aparticular situation, to (2) framing a specific rule or approach for a particular category of situations, to (3) more general or abstract theory or policy. A person’s inclinations in regard to the dichotomies affects the conclusions that person will reach on each of those levels of analysis, yet those inclinations and assumptions are frequently unexamined and unarticulated. One’s position on each of the dichotomies tends to structure the approach and outcome without the issues and choice having been explicitly addressed or possibly even noticed. This article is an effort to ameliorate that problem. Part I addresses the question of what is the risk in the work of lawyers, or the function of lawyers, for which professional ethics is the answer. The concluding section focuses on the particular problem of the corporation as client. Part II then asks the related and possibly consequent question of what is the foundational orientation or allegiance of the lawyer? Is it to the individual client? Or is it to some larger community interest? Again, the concluding section focuses on thecorporation. Part III turns to the means or method for addressing the obligations and possible problems of the professional ethics of lawyers. Should lawyers’ ethics guide and confine the conduct of lawyers primarily through rules? Or should it function primarily through reliance on the knowledge, judgment and character of lawyers? If the latter were the guide, ethical decisions would be made on a situation by situation basis under the discretion of each lawyer. Toward the end of each discussion possibilities for bridging the dichotomy are considered (and with such bridges each dichotomy may come to look more like a spectrum or continuum.). At several points after its introduction in Parts I and II, the special problem of the corporation as client is revisited and possible solutions suggested. Illustrating the usefulness of keeping the dichotomies in view, Part IV applies them to several exemplary situations of ethical difficulty in actual lawyer practice. For readers finding it difficult to envision the consequences of these distinctions, turning ahead to Part IV may be useful in making the discussion more concrete. Some commonalities across the dichotomies and connections among them are then developed in the concluding section, Part V.

How I Learned to Stop Worrying and Love the Bits: Archival Motivation in the Digital Age

Why do people become archivists? Historically (and anecdotally) it was a deep love of musty, old records that drew people to the profession. While there have been many other motivating forces that inspired would-be archivists, it is most often that one hears of people seeking jobs in archives for love of “the stuff,” as evidenced in Kate Thiemer’s blog post, Honest tips for wannabe archivists (2012). As a result of the continually advancing presence of digitized and born digital archival collections, the physical nature of archival “stuff” is changing. While there remains the physical imprint of digital information on floppy disks, CDs, DVDs, hard drives, and old computers; the aspects of these physical artifacts might not evoke the same visceral pull to the profession as musty, raspy, paper-based documents. In light of this shift in physical presentation of information, we are faced with the question: how does love of archival “stuff” translate to work in digital archives? What is and/or will be the pull to become a digital archivist? To answer these questions, we will perform a survey-based study where we will invite archivists who work with both traditional and digital archival material to answer questions related to the aspects of their work that inspired or motivated them to join the profession. What motivates people to become archivists? What aspects of digital archives do or can potentially motivate people to seek out a career as an archivist? What, if any, motivational factors for becoming a traditional archivist are the same as those for becoming a digital archivist? What, if any, motivational factors for becoming a traditional archivist are different from those for becoming a digital archivist? By answering these questions, we hope to expand the archival discussion on what it means to be an archivist in the digital age. What compelling intrinsic, evidential, or informational values are present in digital archival content that will draw professionals to the field? Are there other values inherent in digital content that are currently unexplored? In our poster, we will present our discussion of the topic, our survey design, and results we have at the time of the Institute. Thiemer, K. (2012). Honest tips for wannabe archivists. Archivesnext blog. Retrieved from http://www.archivesnext.com/?p=2849