Synecology in soft sediment bivalves: the influence of parasites, physiological processes, and environmental stressors on health and disease

Ecosystem goods and services provided by estuarine and near coastal regions are being increasingly recognised for their immense value, as is the biodiversity in these areas and these near coastal communities have been identified as sentinels of climate change also. Population structure and reproductive biology of two bivalve molluscs, Cerastoderma edule and, Mytilus edulis were assessed at two study sites over a 16-month study period. Following an anomalously harsh winter, advancement of spawning time was observed in both species. Throughout Ireland and Europe the cockle has experienced mass surfacings in geographically distinct regions, and a concurrent study of cockles was undertaken to explore this phenomenon. Surfaced and buried cockles were collected on a monthly basis and their health compared. Age was highlighted as a source of variation between dying and healthy animals with a parasite threshold being reached possibly around age three. Local factors dominated when looking at the cause of surfacing at each site. The health of mussels was explored too on a temporal and seasonal basis in an attempt to assess what constitutes a healthy organism. In essence external drivers can tip the balance between “acceptable” levels of infection where the mussel can still function physiologically and “unacceptable” where prevalence and intensity of infection can result in physiological impairment at the individual and population level. Synecological studies of intertidal ecosystems are lacking, so all bivalves encountered during the sampling were assessed in terms of population structure, reproduction, and health. It became clear, that some parasites might specialize on one host species while others are not so specific in host choice. Furthermore the population genetics of the cockle, its parasite Meiogymnophallus minutus, and its hyperparasite Unikaryon legeri were examined too. A small nucleotide polymorphism was detected upon comparison of Ireland and Morocco.

A facilities maintenance management process based on degradation prediction using sensed data

Energy efficiency and user comfort have recently become priorities in the Facility Management (FM) sector. This has resulted in the use of innovative building components, such as thermal solar panels, heat pumps, etc., as they have potential to provide better performance, energy savings and increased user comfort. However, as the complexity of components increases, the requirement for maintenance management also increases. The standard routine for building maintenance is inspection which results in repairs or replacement when a fault is found. This routine leads to unnecessary inspections which have a cost with respect to downtime of a component and work hours. This research proposes an alternative routine: performing building maintenance at the point in time when the component is degrading and requires maintenance, thus reducing the frequency of unnecessary inspections. This thesis demonstrates that statistical techniques can be used as part of a maintenance management methodology to invoke maintenance before failure occurs. The proposed FM process is presented through a scenario utilising current Building Information Modelling (BIM) technology and innovative contractual and organisational models. This FM scenario supports a Degradation based Maintenance (DbM) scheduling methodology, implemented using two statistical techniques, Particle Filters (PFs) and Gaussian Processes (GPs). DbM consists of extracting and tracking a degradation metric for a component. Limits for the degradation metric are identified based on one of a number of proposed processes. These processes determine the limits based on the maturity of the historical information available. DbM is implemented for three case study components: a heat exchanger; a heat pump; and a set of bearings. The identified degradation points for each case study, from a PF, a GP and a hybrid (PF and GP combined) DbM implementation are assessed against known degradation points. The GP implementations are successful for all components. For the PF implementations, the results presented in this thesis find that the extracted metrics and limits identify degradation occurrences accurately for components which are in continuous operation. For components which have seasonal operational periods, the PF may wrongly identify degradation. The GP performs more robustly than the PF, but the PF, on average, results in fewer false positives. The hybrid implementations, which are a combination of GP and PF results, are successful for 2 of 3 case studies and are not affected by seasonal data. Overall, DbM is effectively applied for the three case study components. The accuracy of the implementations is dependant on the relationships modelled by the PF and GP, and on the type and quantity of data available. This novel maintenance process can improve equipment performance and reduce energy wastage from BSCs operation.

Formation and electrical interfacing of nanocrystal-molecule nanostructures

The objective of this thesis work is to develop methods for forming and interfacing nanocrystal-molecule nanostructures in order to explore their electrical transport properties in various controlled environments. This work demonstrates the potential of nanocrystal assemblies for laterally contacting molecules for electronic transport measurements. We first propose a phenomenological model based on rate equations for the formation of hybrid nanocrystal-molecule (respectively: 20 nm – 1.2 nm) nanostructures in solution. We then concentrate on nanocrystals (~ 60 nm) assembled between nano-gaps (~ 40 nm) as a contacting strategy for the measurement of electronic transport properties of thiophene-terminated conjugated molecules (1.5 nm long) in a two-terminal configuration, under vacuum conditions. Similar devices were also probed with a three-terminal configuration using thiophene-terminated oxidation-reduction active molecules (1.8 nm long) in liquid medium for the demonstration of the electrolytic gating technique. The experimental and modelling work presented in this thesis project brings into light physical and chemical processes taking place at the extremely narrow (~1 nm separation) and curved interface between two nanocrystals or one nanocrystal and a grain of a metallic electrode. The formation of molecular bridges at this kind of interface necessitates molecules to diffuse from a large liquid reservoir into the region in the first place. Molecular bonding must occur to the surface for both molecular ends: this is a low yield statistical process in itself as it depends on orientation of surfaces, on steric hindrance at the surface and on binding energies. On the other hand, the experimental work also touched the importance of the competition between potentially immiscible liquids in systems such that (organo-)metallic molecules solvated by organic solvent in water and organic solvent in contact with hydrated citrate stabilised nanocrystals dispersed in solutions or assembled between electrodes from both experimental and simulations point of view.

Investigation of catalyst effects in enantioselective copper- and rhodium-mediated transformations of α-diazocarbonyl compounds

This thesis describes the synthesis and reactivity of a series of α-diazocarbonyl compounds with particular emphasis on the use of copper-bis(oxazoline)-mediated enantioselective C–H insertion reactions leading to enantioenriched cyclopentanone derivatives. Through the use of additives, the enantioselectivity achieved with the copper catalysts for the first time reaches synthetically useful levels (up to 91% ee). Chapter one provides a comprehensive overview of enantioselective C–H insertions with α-diazocarbonyl compounds from the literature. The majority of reports in this section involve rhodium-catalysed systems with limited reports to date of asymmetric C–H insertion reactions in the presence of copper catalysts. Chapter two focuses on the synthesis and C–H insertion reactions of α-diazo-β-keto sulfones leading to α-sulfonyl cyclopentanones as the major product. Detailed investigation of the impact of substrate structure (both the sulfonyl substitutent and the substituent at the site of insertion), the copper source, ligand, counterion, additive and solvent was undertaken to provide an insight into the mechanistic basis for enantiocontrol in the synthetically powerful C–H insertion process and to enable optimisation of enantiocontrol and ligand design. Perhaps the most significant outcome of this work is the enhanced enantioselection achieved through use of additives, substantially improving the synthetic utility of the asymmetric C–H insertion process. In addition to the C–H insertion reaction, mechanistically interesting competing reaction pathways involving hydride transfer are observed. Chapter three reports the extension of the catalyst-additive systems, developed for C–H insertions with α-diazo-β-keto sulfones in chapter two, to C–H insertion in analogous α-diazo-β-keto phosphonate and α-diazo-β-keto ester systems. While similar patterns were seen in terms of ligand effects, the enantiopurities achieved for these reactions were lower than those in the cyclisations with analogous α-diazo-β-keto sulfones. Extension of this methodology to cyclopropanation and oxium ylide formation/[2,3]-sigmatropic rearrangement was also explored. Chapter four contains the full experimental details and spectral characterisation of all novel compounds synthesised in this project, while details of chiral stationary phase HPLC analysis and X-ray crystallography are included in the appendix.

The Irish House of Lords, 1780-1800: politics and ideology

This thesis covers the Irish House of Lords in the last two decades of its life. A number of important themes run through the work - the regency crisis, patronage, the management of the Lords, the relationship between the Lords and Commons. These themes, explored from different angles, are vital to an understanding of the political role of the upper house in the 1780s and 1790s. This study is confined to the Lords as a political institution and thus its judicial role as final court of appeal, which was restored to it in 1782, will not be explored here. The thesis consists of two parts. Part one examines the structure and powers of the House of Lords while part two looks at the parties and policies of the house. Chapter one discusses the British constitution as imposed upon Ireland. Chapter two suggests the reasons why constitutional changes were introduced in 1782, and looks at the contribution made by the Irish House of Lords in securing these changes. Chapter three explores the various channels of influence which the peers enjoyed. Chapter four explores the sometimes tense relationship between Lords and Commons. Chapter five examines management of the House of Lords by Dublin Castle. Part two, begins at chapter six. This chapter explores the leadership of both parties within the Lords. Chapter seven looks at how patronage was used to reward those who were loyal to the government. Chapter eight explores the influence of the Whig opposition. Chapter nine looks at the controversial attempts made by Pitt and his ministry during the 1790s to win the support of catholics and turn them from the lure of French ideas, and of the response of the peers to these attempts. Chapter ten is concerned with the relationship between the peers of the House of Lords and the lords lieutenant during the 1790s. Chapter eleven looks at the Union and the House of Lords and attempts to answer the question historians have long asked: why did the Irish parliament and the House of Lords in particular, look favourably on the proposed union of the two kingdoms and the end of their own institution? The House of Lords in the closing decades of the eighteenth century was an institution within which the wealth and power of the kingdom could be found. Its members were politically active, both inside and outside the house. It contained a majority who saw the Crown as the source of stability, but it was a living and evolving political organism and therefore it contained men who believed that the Crown should have its influence limited. This evolution is also demonstrated in its desire for political change in 1782 and 1788. Its last, and perhaps most radical decision, was to vote for its own demise in 1900.

Usability-enhanced coordination design of geovisualisations to communicate coastal flood risk information

For at least two millennia and probably much longer, the traditional vehicle for communicating geographical information to end-users has been the map. With the advent of computers, the means of both producing and consuming maps have radically been transformed, while the inherent nature of the information product has also expanded and diversified rapidly. This has given rise in recent years to the new concept of geovisualisation (GVIS), which draws on the skills of the traditional cartographer, but extends them into three spatial dimensions and may also add temporality, photorealistic representations and/or interactivity. Demand for GVIS technologies and their applications has increased significantly in recent years, driven by the need to study complex geographical events and in particular their associated consequences and to communicate the results of these studies to a diversity of audiences and stakeholder groups. GVIS has data integration, multi-dimensional spatial display advanced modelling techniques, dynamic design and development environments and field-specific application needs. To meet with these needs, GVIS tools should be both powerful and inherently usable, in order to facilitate their role in helping interpret and communicate geographic problems. However no framework currently exists for ensuring this usability. The research presented here seeks to fill this gap, by addressing the challenges of incorporating user requirements in GVIS tool design. It starts from the premise that usability in GVIS should be incorporated and implemented throughout the whole design and development process. To facilitate this, Subject Technology Matching (STM) is proposed as a new approach to assessing and interpreting user requirements. Based on STM, a new design framework called Usability Enhanced Coordination Design (UECD) is ten presented with the purpose of leveraging overall usability of the design outputs. UECD places GVIS experts in a new key role in the design process, to form a more coordinated and integrated workflow and a more focused and interactive usability testing. To prove the concept, these theoretical elements of the framework have been implemented in two test projects: one is the creation of a coastal inundation simulation for Whitegate, Cork, Ireland; the other is a flooding mapping tool for Zhushan Town, Jiangsu, China. The two case studies successfully demonstrated the potential merits of the UECD approach when GVIS techniques are applied to geographic problem solving and decision making. The thesis delivers a comprehensive understanding of the development and challenges of GVIS technology, its usability concerns, usability and associated UCD; it explores the possibility of putting UCD framework in GVIS design; it constructs a new theoretical design framework called UECD which aims to make the whole design process usability driven; it develops the key concept of STM into a template set to improve the performance of a GVIS design. These key conceptual and procedural foundations can be built on future research, aimed at further refining and developing UECD as a useful design methodology for GVIS scholars and practitioners.

Trophic role of small cetaceans and seals in Irish waters

Understanding the role of marine mammals in specific ecosystems and their interactions with fisheries involves, inter alia, an understanding of their diet and dietary requirements. In this thesis, the foraging ecology of seven marine mammal species that regularly occur in Irish waters was investigated by reconstructing diet using hard parts from digestive tracts and scats. Of the species examined, two (striped and Atlantic white-sided dolphin) can be considered offshore species or species inhabiting neritic waters, while five others usually inhabit more coastal areas (white-beaked dolphin, harbour porpoise, harbour seal and grey seal); the last species studied was the bottlenose dolphin whose population structure is more complex, with coastal and offshore populations. A total of 13,028 prey items from at least 81 different species (62 fish species, 14 cephalopods, four crustaceans, and a tunicate) were identified. 28% of the fish species were identified using bones other than otoliths, highlighting the importance of using all identifiable structures to reconstruct diet. Individually, each species of marine mammal presented a high diversity of prey taxa, but the locally abundant Trisopterus spp. were found to be the most important prey item for all species, indicating that Trisopterus spp. is probably a key species in understanding the role of these predators in Irish waters. In the coastal marine mammals, other Gadiformes species (haddock, pollack, saithe, whiting) also contributed substantially to the diet; in contrast, in pelagic or less coastal marine mammals, prey was largely comprised of planktivorous fish, such as Atlantic mackerel, horse mackerel, blue whiting, and mesopelagic prey. Striped dolphins and Atlantic white-sided dolphins are offshore small cetaceans foraging in neritic waters. Differences between the diet of striped dolphins collected in drift nets targeting tuna and stranded on Irish coasts showed a complex foraging behaviour; the diet information shows that although this dolphin forages mainly in oceanic waters it may occasionally forage on the continental shelf, feeding on available prey. The Atlantic white-sided dolphin diet showed that this species prefers to feed over the continental edge, where planktivorous fish are abundant. Some resource partitioning was found in bottlenose dolphins in Irish waters consistent with previous genetic and stable isotope analysis studies. Bottlenose dolphins in Irish waters appears to be generalist feeders consuming more than 30 prey species, however most of the diet comprised a few locally abundant species, especially gadoid fish including haddock/pollack/saithe group and Trisopterus spp., but the contribution of Atlantic hake, conger eels and the pelagic planktivorous horse mackerel were also important. Stomach content information suggests that three different feeding behaviours might occur in bottlenose dolphin populations in Irish waters; firstly a coastal behaviour, with animals feeding on prey that mainly inhabit areas close to the coast; secondly an offshore behaviour where dolphins feed on offshore species such as squid or mesopelagic fish; and a third more complex behaviour that involves movements over the continental shelf and close to the shelf edge. The other three coastal marine mammal species (harbour porpoise, harbour seal and grey seal) were found to be feeding on similar prey and competition for food resources among these sympatric species might occur. Both species of seals were found to have a high overlap (more than 80%) in their diet composition, but while grey seals feed on large fish (>110mm), harbour seals feed mostly on smaller fish (<110mm), suggesting some spatial segregation in foraging. Harbour porpoises and grey seals are potentially competing for the same food resource but some differences in prey species were found and some habitat partitioning might occur. Direct interaction (by catch) between dolphins and fisheries was detected in all species. Most of the prey found in the stomach contents from both stranded and by catch dolphins were smaller sizes than those targeted by commercial fisheries. In fact, the total annual food consumption of the species studied was found to be very small (225,160 tonnes) in comparison to fishery landings for the same area (~2 million tonnes). However, marine mammal species might be indirectly interacting with fisheries, removing forage fish. Incorporating the dietary information obtained from the four coastal species, an ECOPATH food web model was established for the Irish Sea, based on data from 2004. Five trophic levels were found, with bottlenose dolphins and grey and harbour seals occurring at the highest trophic level. A comparison with a previous model based on 1973 data suggests that while the overall Irish Sea ecosystem appears to be “maturing”, some indices indicate that the 2004 fishery was less efficient and was targeting fish at higher trophic levels than in 1973, which is reflected in the mean trophic level of the catch. Depletion or substantial decrease of some of the Irish Sea fish stocks has resulted in a significant decline in landings in this area. The integration of diet information in mass-balance models to construct ecosystem food-webs will help to understand the trophic role of these apex predators within the ecosystem.

Caregiver burden and resilience among Malaysian caregivers of individuals with severe mental illness

Little research has focused on caregiver burden experienced by Malaysian caregivers of individuals with mental illness, despite the fact that data in the Asian region shows almost threequarter of patients with mental illness live with family members. The aim of this research was to examine the levels of caregiver burden and resilience of caregivers of individuals with severe mental illness and to determine the influencing factors on caregiver burden. A quantitative, cross sectional, correlational design was used to measure burden and resilience and to explore the relationship between demographic variables, caregiver stressors, resilience and caregiver burden. This study was guided by the model of Carer Stress and Burden. Data collection was conducted over two months in summer 2014. A self-administered questionnaire that consisted of four sections measuring demographic data, primary stressors, caregiver burden and resilience was used to collect data. Two hundred and one caregivers of individuals with mental illness attending Psychiatric Outpatient Clinics in Malaysia were recruited. Samples were selected using non-probability, consecutive sampling. Factors that were found to be significantly associated with caregiver burden were caregivers’ age, gender, ethnic group, employment status, having a medical condition and current health status. The primary stressors found to be significantly associated with caregiver burden include the time spent for caregiving tasks, unavailability of support with caregiving tasks, lack of emotional support and patients’ behavioural disturbances. In addition, it was found that caregivers who were less resilient reported a higher level of caregiver burden. Findings from hierarchical multiple regression indicated that caregivers’ marital status, current health status, time spent for caregiving and resilience predicted caregiver burden. This research provides insight into caregiver burden among caregivers of individuals with mental illness in Malaysia. It highlights the important factors associated with caregiver burden and the significant role of resilience in reducing caregiver burden.