Vulnerability and adaptation to climate change in Guam – a case-study of the perceptions, attitudes, behaviors, and knowledge of a small rural community towards their watershed

This thesis argues that examining the attitudes, perceptions, behaviors, and knowledge of a community towards their specific watershed can reveal their social vulnerability to climate change. Understanding and incorporating these elements of the human dimension in coastal zone management will lead to efficient and effective strategies that safeguard the natural resources for the benefit of the community. By having healthy natural resources, ecological and community resilience to climate change will increase, thus decreasing vulnerability. In the Pacific Ocean, climate and SLR are strongly modulated by the El Niño Southern Oscillation. SLR is three times the global average in the Western Pacific Ocean (Merrifield and Maltrud 2011; Merrifield 2011). Changes in annual rainfall in the Western North Pacific sub‐region from 1950-2010 show that islands in the east are getting much less than in the past, while the islands in the west are getting slightly more rainfall (Keener et al. 2013). For Guam, a small island owned by the United States and located in the Western Pacific Ocean, these factors mean that SLR is higher than any other place in the world and will most likely see increased precipitation. Knowing this, the social vulnerability may be examined. Thus, a case-study of the community residing in the Manell and Geus watersheds was conducted on the island of Guam. Measuring their perceptions, attitudes, knowledge, and behaviors should bring to light their vulnerability to climate change. In order to accomplish this, a household survey was administered from July through August 2010. Approximately 350 surveys were analysed using SPSS. To supplement this quantitative data, informal interviews were conducted with the elders of the community to glean traditional ecological knowledge about perceived climate change. A GIS analysis was conducted to understand the physical geography of the Manell and Geus watersheds. This information about the human dimension is valuable to CZM managers. It may be incorporated into strategic watershed plans, to better administer the natural resources within the coastal zone. The research conducted in this thesis is the basis of a recent watershed management plan for the Guam Coastal Management Program (see King 2014).

Specification of optimum holistic building environmental and energy performance information to support informed decision making

Political drivers such as the Kyoto protocol, the EU Energy Performance of Buildings Directive and the Energy end use and Services Directive have been implemented in response to an identified need for a reduction in human related CO2 emissions. Buildings account for a significant portion of global CO2 emissions, approximately 25-30%, and it is widely acknowledged by industry and research organisations that they operate inefficiently. In parallel, unsatisfactory indoor environmental conditions have proven to negatively impact occupant productivity. Legislative drivers and client education are seen as the key motivating factors for an improvement in the holistic environmental and energy performance of a building. A symbiotic relationship exists between building indoor environmental conditions and building energy consumption. However traditional Building Management Systems and Energy Management Systems treat these separately. Conventional performance analysis compares building energy consumption with a previously recorded value or with the consumption of a similar building and does not recognise the fact that all buildings are unique. Therefore what is required is a new framework which incorporates performance comparison against a theoretical building specific ideal benchmark. Traditionally Energy Managers, who work at the operational level of organisations with respect to building performance, do not have access to ideal performance benchmark information and as a result cannot optimally operate buildings. This thesis systematically defines Holistic Environmental and Energy Management and specifies the Scenario Modelling Technique which in turn uses an ideal performance benchmark. The holistic technique uses quantified expressions of building performance and by doing so enables the profiled Energy Manager to visualise his actions and the downstream consequences of his actions in the context of overall building operation. The Ideal Building Framework facilitates the use of this technique by acting as a Building Life Cycle (BLC) data repository through which ideal building performance benchmarks are systematically structured and stored in parallel with actual performance data. The Ideal Building Framework utilises transformed data in the form of the Ideal Set of Performance Objectives and Metrics which are capable of defining the performance of any building at any stage of the BLC. It is proposed that the union of Scenario Models for an individual building would result in a building specific Combination of Performance Metrics which would in turn be stored in the BLC data repository. The Ideal Data Set underpins the Ideal Set of Performance Objectives and Metrics and is the set of measurements required to monitor the performance of the Ideal Building. A Model View describes the unique building specific data relevant to a particular project stakeholder. The energy management data and information exchange requirements that underlie a Model View implementation are detailed and incorporate traditional and proposed energy management. This thesis also specifies the Model View Methodology which complements the Ideal Building Framework. The developed Model View and Rule Set methodology process utilises stakeholder specific rule sets to define stakeholder pertinent environmental and energy performance data. This generic process further enables each stakeholder to define the resolution of data desired. For example, basic, intermediate or detailed. The Model View methodology is applicable for all project stakeholders, each requiring its own customised rule set. Two rule sets are defined in detail, the Energy Manager rule set and the LEED Accreditor rule set. This particular measurement generation process accompanied by defined View would filter and expedite data access for all stakeholders involved in building performance. Information presentation is critical for effective use of the data provided by the Ideal Building Framework and the Energy Management View definition. The specifications for a customised Information Delivery Tool account for the established profile of Energy Managers and best practice user interface design. Components of the developed tool could also be used by Facility Managers working at the tactical and strategic levels of organisations. Informed decision making is made possible through specified decision assistance processes which incorporate the Scenario Modelling and Benchmarking techniques, the Ideal Building Framework, the Energy Manager Model View, the Information Delivery Tool and the established profile of Energy Managers. The Model View and Rule Set Methodology is effectively demonstrated on an appropriate mixed use existing ‘green’ building, the Environmental Research Institute at University College Cork, using the Energy Management and LEED rule sets. Informed Decision Making is also demonstrated using a prototype scenario for the demonstration building.

Towards a regional understanding of Irish traditional music

The geography of Irish traditional music is a complex, popular and largely unexplored element of the narrative of the tradition. Geographical concepts such as the region are recurrent in the discourse of Irish traditional music but regions and their processes are, for the most part, blurred or misunderstood. This thesis explores the geographical approach to the study of Irish traditional music focusing on the concept of the region and, in particular, the role of memory in the construction and diffusion of regional identities. This is a tripartite study considering people, place and music. Each of these elements impacts on our experience of the other. All societies have created music. Music is often associated with or derived from places. Some places construct or reinforce their identity through the music and musicians through which they are associated. The thesis challenges conventional discourse on regional styles that construct an imagined pattern of regions based on subtle musical differences that may, though are not always, shared by people in that region and focuses on the social networks through which the music is disseminated. The thesis also challenges the abandonment of regional styles and the concept of regions in understanding the complex geographies of Irish traditional music (Morton, 2001). It seeks to find a middle ground between discourse analysis, musical analysis, the experience of music and place, and the representation of music and place. The dissertation is divided into three parts. Part one considers the development of music geography, noting and critiquing the abandonment of useful paradigms in both geography and ethnomusicology in search of new ways of understanding. Of particular interest is the concept of the region but it also considers the study of landscape and the humanist approach in cultural geography. The second part focuses on the discourse and study of regions in Irish traditional music and the various agents and processes that shape the concept of the region in Irish traditional music. The final part presents a case study of the Sliabh Luachra region combining and applying the various perspectives and paradigms drawn from geographical, ethnomusicological and anthropological sources. It attempts to generate an understanding of Sliabh Luachra as a region in the Irish traditional music narrative that is based on a combination of musical, socio-cultural and locational/environmental factors.

Hazard and early warning analysis based on domain specific modeling technologies

An aim of proactive risk management strategies is the timely identification of safety related risks. One way to achieve this is by deploying early warning systems. Early warning systems aim to provide useful information on the presence of potential threats to the system, the level of vulnerability of a system, or both of these, in a timely manner. This information can then be used to take proactive safety measures. The United Nation’s has recommended that any early warning system need to have four essential elements, which are the risk knowledge element, a monitoring and warning service, dissemination and communication and a response capability. This research deals with the risk knowledge element of an early warning system. The risk knowledge element of an early warning system contains models of possible accident scenarios. These accident scenarios are created by using hazard analysis techniques, which are categorised as traditional and contemporary. The assumption in traditional hazard analysis techniques is that accidents are occurred due to a sequence of events, whereas, the assumption of contemporary hazard analysis techniques is that safety is an emergent property of complex systems. The problem is that there is no availability of a software editor which can be used by analysts to create models of accident scenarios based on contemporary hazard analysis techniques and generate computer code that represent the models at the same time. This research aims to enhance the process of generating computer code based on graphical models that associate early warning signs and causal factors to a hazard, based on contemporary hazard analyses techniques. For this purpose, the thesis investigates the use of Domain Specific Modeling (DSM) technologies. The contributions of this thesis is the design and development of a set of three graphical Domain Specific Modeling languages (DSML)s, that when combined together, provide all of the necessary constructs that will enable safety experts and practitioners to conduct hazard and early warning analysis based on a contemporary hazard analysis approach. The languages represent those elements and relations necessary to define accident scenarios and their associated early warning signs. The three DSMLs were incorporated in to a prototype software editor that enables safety scientists and practitioners to create and edit hazard and early warning analysis models in a usable manner and as a result to generate executable code automatically. This research proves that the DSM technologies can be used to develop a set of three DSMLs which can allow user to conduct hazard and early warning analysis in more usable manner. Furthermore, the three DSMLs and their dedicated editor, which are presented in this thesis, may provide a significant enhancement to the process of creating the risk knowledge element of computer based early warning systems.

A knowledge management system to optimise comfort throughout the building life-cycle

Comfort is, in essence, satisfaction with the environment, and with respect to the indoor environment it is primarily satisfaction with the thermal conditions and air quality. Improving comfort has social, health and economic benefits, and is more financially significant than any other building cost. Despite this, comfort is not strictly managed throughout the building lifecycle. This is mainly due to the lack of an appropriate system to adequately manage comfort knowledge through the construction process into operation. Previous proposals to improve knowledge management have not been successfully adopted by the construction industry. To address this, the BabySteps approach was devised. BabySteps is an approach, proposed by this research, which states that for an innovation to be adopted into the industry it must be implementable through a number of small changes. This research proposes that improving the management of comfort knowledge will improve comfort. ComMet is a new methodology proposed by this research that manages comfort knowledge. It enables comfort knowledge to be captured, stored and accessed throughout the building life-cycle and so allowing it to be re-used in future stages of the building project and in future projects. It does this using the following: Comfort Performances – These are simplified numerical representations of the comfort of the indoor environment. Comfort Performances quantify the comfort at each stage of the building life-cycle using standard comfort metrics. Comfort Ratings - These are a means of classifying the comfort conditions of the indoor environment according to an appropriate standard. Comfort Ratings are generated by comparing different Comfort Performances. Comfort Ratings provide additional information relating to the comfort conditions of the indoor environment, which is not readily determined from the individual Comfort Performances. Comfort History – This is a continuous descriptive record of the comfort throughout the project, with a focus on documenting the items and activities, proposed and implemented, which could potentially affect comfort. Each aspect of the Comfort History is linked to the relevant comfort entity it references. These three components create a comprehensive record of the comfort throughout the building lifecycle. They are then stored and made available in a common format in a central location which allows them to be re-used ad infinitum. The LCMS System was developed to implement the ComMet methodology. It uses current and emerging technologies to capture, store and allow easy access to comfort knowledge as specified by ComMet. LCMS is an IT system that is a combination of the following six components: Building Standards; Modelling & Simulation; Physical Measurement through the specially developed Egg-Whisk (Wireless Sensor) Network; Data Manipulation; Information Recording; Knowledge Storage and Access.Results from a test case application of the LCMS system - an existing office room at a research facility - highlighted that while some aspects of comfort were being maintained, the building’s environment was not in compliance with the acceptable levels as stipulated by the relevant building standards. The implementation of ComMet, through LCMS, demonstrates how comfort, typically only considered during early design, can be measured and managed appropriately through systematic application of the methodology as means of ensuring a healthy internal environment in the building.

Genetic analysis of bacteriophages from clinical and environmental samples

Bacteriophages, viruses infecting bacteria, are uniformly present in any location where there are high numbers of bacteria, both in the external environment and the human body. Knowledge of their diversity is limited by the difficulty to culture the host species and by the lack of the universal marker gene present in all viruses. Metagenomics is a powerful tool that can be used to analyse viral communities in their natural environments. The aim of this study was to investigate diverse populations of uncultured viruses from clinical (a sputum of patient with cystic fibrosis, CF) and environmental samples (a sludge from a dairy food wastewater treatment plant) containing rich bacterial populations using genetic and metagenomic analyses. Metagenomic sequencing of viruses obtained from these samples revealed that the majority of the metagenomic reads (97-99%) were novel when compared to the NCBI protein database using BLAST. A large proportion of assembled contigs were assignable as novel phages or uncharacterised prophages, the next largest assignable group being single-stranded eukaryotic virus genomes. Sputum from a cystic fibrosis patient contained DNA typical of phages of bacteria that are traditionally involved in CF lung infections and other bacteria that are part of the normal oral flora. The only eukaryotic virus detected in the CF sputum was Torque Teno virus (TTV). A substantial number of assigned sequences from dairy wastewater could be affiliated with phages of bacteria that are typically found in the soil and aquatic environments, including wastewater. Eukaryotic viral sequences were dominated by plant pathogens from the Geminiviridae and Nanoviridae families, and animal pathogens from the Circoviridae family. Antibiotic resistance genes were detected in both metagenomes suggesting phages could be a source for transmissible antimicrobial resistance. Overall, diversity of viruses in the CF sputum was low, with 89 distinct viral genotypes predicted, and higher (409 genotypes) in the wastewater. Function-based screening of a metagenomic library constructed from DNA extracted from dairy food wastewater viruses revealed candidate promoter sequences that have ability to drive expression of GFP in a promoter-trap vector in Escherichia coli. The majority of the cloned DNA sequences selected by the assay were related to ssDNA circular eukaryotic viruses and phages which formed a minority of the metagenome assembly, and many lacked any significant homology to known database sequences. Natural diversity of bacteriophages in wastewater samples was also examined by PCR amplification of the major capsid protein sequences, conserved within T4-type bacteriophages from Myoviridae family. Phylogenetic analysis of capsid sequences revealed that dairy wastewater contained mainly diverse and uncharacterized phages, while some showed a high level of similarity with phages from geographically distant environments.

Proteomic approaches to environmental stress in mussel Mytilus edulis due to emerging classes of anthropogenic pollutants

Anthropogenic pollutant chemicals pose a major threat to aquatic organisms. There is a need for more research on emerging categories of environmental chemicals such as nanomaterials, endocrine disruptors and pharmaceuticals. Proteomics offers options and advantages for early warning of alterations in environmental quality by detecting sub-lethal changes in sentinel species such as the mussel, Mytilus edulis. This thesis aimed to compare the potential of traditional biomarkers (such as enzyme activity measurement) and newer redox proteomic approaches. Environmental proteomics, especially a redox proteomics toolbox, may be a novel way to study pollutant effects on organisms which can also yield information on risks to human health. In particular, it can probe subtle biochemical changes at sub-lethal concentrations and thus offer novel insights to toxicity mechanisms. In the first instance, the present research involved a field-study in three stations in Cork Harbour, Ireland (Haulbowline, Ringaskiddy and Douglas) compared to an outharbour control site in Bantry Bay, Ireland. Then, further research was carried out to detect effects of anthropogenic pollution on selected chemicals. Diclofenac is an example of veterinary and human pharmaceuticals, an emerging category of chemical pollutants, with potential to cause serious toxicity to non-target organisms. A second chemical used for this study was copper which is a key source of contamination in marine ecosystems. Thirdly, bisphenol A is a major anthropogenic chemical mainly used in polycarbonate plastics manufacturing that is widespread in the environment. It is also suspected to be an endocrine disruptor. Effects on the gill, the principal feeding organ of mussels, were investigated in particular. Effects on digestive gland were also investigated to compare different outcomes from each tissue. Across the three anthropogenic chemicals studied (diclofenac, copper and bisphenol A), only diclofenac exposure did not show any significant difference towards glutathione transferase (GST) responses. Meanwhile, copper and bisphenol A significantly increased GST in gill. Glutathione reductase (GR) enzyme analysis revealed that all three chemicals have significant responses in gill. Catalase activity showed significant differences in digestive gland exposed to diclofenac and gills exposed to bisphenol A. This study focused then on application of redox proteomics; the study of the oxidative modification of proteins, to M. edulis. Thiol proteins were labelled with 5-iodoacetamidofluorescein prior to one-dimensional and two-dimensional electrophoresis. This clearly revealed some similarities on a portion of the redox proteome across chemical exposures indicating where toxicity mechanism may be common and where effects are unique to a single treatment. This thesis documents that proteomics is a robust tool to provide valuable insights into possible mechanisms of toxicity of anthropogenic contaminants in M. edulis. It is concluded that future research should focus on gill tissue, on protein thiols and on key individual proteins discovered in this study such as calreticulin and arginine kinase which have not previously been considered as biomarkers in aquatic toxicology prior to this study.

The effect of complex workplace dietary interventions on employees dietary behaviours, nutrition knowledge and health status

Background The growing prevalence and associated burden of diet-related non-communicable diseases is a global public health concern. The environments in which people live and work influences their dietary behaviours. Aim The focus of this thesis was on the effectiveness of complex workplace dietary interventions. The comparative effectiveness of a complex workplace environmental dietary modification intervention and an educational intervention were assessed both alone and in combination relative to a control workplace setting. Methods The systematic review was guided by the PRISMA statement. In a cluster controlled trial, four workplaces were purposively allocated to control, nutrition education alone (Education), environmental dietary modification alone (Environment) and nutrition education and environmental dietary modification (Combined intervention). The interventions were guided by the MRC framework. In the control workplace, data were collected at baseline and follow-up. In the intervention related sub-study, the relationships between nutrition knowledge, diet quality and hypertension were examined. Results The systematic review provided limited evidence. In the FCW study, 850 employees aged 18-64 years were recruited at baseline with N(response rate %) in each workplace as follows: Control: 111(72%), Education: 226(71%), Environment: 113(91%), Combined intervention: 400(61%). Complete follow-up data was obtained for 517 employees (61%). There were significant positive changes in dietary intakes of saturated fat(p=0.013), salt(p=0.010) and nutrition knowledge(p=0.034) between baseline and follow-up at 7-9 months in the combined intervention versus the control workplace in the fully adjusted multivariate analysis. Small but significant changes in BMI(-1.2kg/m2 (p=0.047) were also observed in the combined intervention. In the sub-study, nutrition knowledge was positively significantly associated with diet quality and blood pressure but no evidence of a mediation effect of the DASH score was detected between nutrition knowledge and blood pressure. Conclusion This thesis provides critical evidence on the effectiveness of complex workplace dietary interventions in a manufacturing working population.

Exploration of the relationship between tacit knowledge and software system test complexity

This research has explored the relationship between system test complexity and tacit knowledge. It is proposed as part of this thesis, that the process of system testing (comprising of test planning, test development, test execution, test fault analysis, test measurement, and case management), is directly affected by both complexity associated with the system under test, and also by other sources of complexity, independent of the system under test, but related to the wider process of system testing. While a certain amount of knowledge related to the system under test is inherent, tacit in nature, and therefore difficult to make explicit, it has been found that a significant amount of knowledge relating to these other sources of complexity, can indeed be made explicit. While the importance of explicit knowledge has been reinforced by this research, there has been a lack of evidence to suggest that the availability of tacit knowledge to a test team is of any less importance to the process of system testing, when operating in a traditional software development environment. The sentiment was commonly expressed by participants, that even though a considerable amount of explicit knowledge relating to the system is freely available, that a good deal of knowledge relating to the system under test, which is demanded for effective system testing, is actually tacit in nature (approximately 60% of participants operating in a traditional development environment, and 60% of participants operating in an agile development environment, expressed similar sentiments). To cater for the availability of tacit knowledge relating to the system under test, and indeed, both explicit and tacit knowledge required by system testing in general, an appropriate knowledge management structure needs to be in place. This would appear to be required, irrespective of the employed development methodology.