Hearing family carers: report on research undertaken with family carers in Cork

This report details the findings of research undertaken with family carers in Cork during 2007 – 2008. The research was undertaken to elicit the views and experiences of family carers, and in so doing, to gain insight into their perspectives on family caring and on associated support mechanisms. It is hoped that, thereafter, policy can draw on these observations. Three key themes emerged from the research itself. These are (i) the role and position of the family carer in society, (ii) the process of family caring itself and (iii) access to and knowledge of key support services. This report, then, draws attention to the extent and dynamics of family caring, as seen through the opinions and experiences of carers located in and nearby Cork city. It has the following format. In the first instance we turn our attention to a discussion of family caring in Ireland, and associated supports more generally. This includes a discussion on key issues arising in the general discourse around family caring in Ireland and internationally, in order to provide a context from which to locate the experiences of carers involved in this research study. Thereafter, we detail the methodology employed in this research study, which followed a method of research enquiry that values the input of participants from the early stages of research focus and design, and which incorporates qualitative and quantitative methods of enquiry. The research was conceptualised and developed in conjunction with The Carers Association, Cork in keeping with an approach to social research that attempts to link academic and activist/advocacy interests. Its aims were to identify issues that family carers in the locality considered important, with a view to contributing to local knowledge, providing a forum for ongoing research, and to informing policy developments on carers. The focus of the report then turns to profiling carers who participated in the research, examining the care they provide, and discussing support they receive from family, friends and neighbours – from informal sources. We then look to the access carers have to formal and public, community-based support services. We examine their experiences of, and concerns with regard to some of these key services, and look at ways that such issues might be addressed. The next section concentrates on financial supports, a range of which are available to carers, for instance, to supplement income and to assist with home renovations. We look at their uptake and issues arising, again with a view to understanding and addressing them from the perspectives of the service users. Finally, the report turns its attention to aspirations that carers have for themselves; in terms of their own personal, training, and employment options. The report concludes by drawing attention to key issues discussed throughout and makes a number of key recommendations, aimed at addressing the voiced opinions and experiences of carers that have emerged through the research.

Does attendance affect grade? An analysis of first year economics students in Ireland

This paper examines the relationship between attendance and grade, controlling for other factors, in first year economics courses in University College Cork. Determinants of both class attendance and grade are specified and estimated. We find that attendance is low, at least by comparison with US evidence. Hours worked and travel time are among the factors affecting class attendance. Class attendance, and especially tutorial attendance has a positive and diminishing marginal effect on grade, while hours worked in a part-time job have a significant negative effect on grade.

Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.