Effect of solder volume on joint shape with variable chip-to-board contact pad ratio

The objective of this paper is to investigate the effect of the pad size ratio between the chip and board end of a solder joint on the shape of that solder joint in combination with the solder volume available. The shape of the solder joint is correlated to its reliability and thus of importance. For low density chip bond pad applications Flip Chip (FC) manufacturing costs can be kept down by using larger size board pads suitable for solder application. By using “Surface Evolver” software package the solder joint shapes associated with different size/shape solder preforms and chip/board pad ratios are predicted. In this case a so called Flip-Chip Over Hole (FCOH) assembly format has been used. Assembly trials involved the deposition of lead-free 99.3Sn0.7Cu solder on the board side, followed by reflow, an underfill process and back die encapsulation. During the assembly work pad off-sets occurred that have been taken into account for the Surface Evolver solder joint shape prediction and accurately matched the real assembly. Overall, good correlation was found between the simulated solder joint shape and the actual fabricated solder joint shapes. Solder preforms were found to exhibit better control over the solder volume. Reflow simulation of commercially available solder preform volumes suggests that for a fixed stand-off height and chip-board pad ratio, the solder volume value and the surface tension determines the shape of the joint.

The effect of variability in the powder/liquid ratio on the strength of zinc phosphate cement

Aim: To investigate (a) variability in powder/liquid proportioning (b) effect of the extremes of any such variability on diametral tensile strength (DTS), in a commercial zinc phosphate cement. Statistical analyses (a = 0.05) were by Student's t-test in the case of powder/liquid ratio and one-way ANOVA and Tukey HSD for for pair-wise comparisons of mean DTS. The Null hypotheses were that (a) the powder-liquid mixing ratios observed would not differ from the manufacturer's recommended ratio (b) DTS of the set cement samples using the extreme powder/liquid ratios observed would not differ from those made using the manufacturer's recommended ratio. Methodology: Thirty-four undergraduate dental students dispensed the components according to the manufacturer's instructions. The maximum and minimum powder/liquid ratios (m/m), together with the manufacturer's recommended ratio (m/m), were used to prepare cylindrical samples (n = 3 x 34) for DTS testing. Results: Powder/liquid ratios ranged from 2.386 to 1.018.The mean ratio (1.644 (341) m/m) was not significantly different from the manufacturer's recommended value of 1.718 (p=0.189). DTS values for the maximum and minimum ratios (m/m), respectively, were both significantly different from each other (p<0.001) and from the mean value obtained from the manufacturer's recommended ratio (m/m) (p<0.001). Conclusions: Variability exists in powder/liquid ratio (m/m) for hand dispensed zinc phosphate cement. This variability can affect the DTS of the set material.

The right to humanitarian assistance in natural and human-made disasters: progress and challenges for an emerging international legal framework

Natural and human-made disasters cause on average 120,000 deaths and over US$140 billion in damage to property and infrastructure every year, with national, regional and international actors consistently responding to the humanitarian imperative to alleviate suffering wherever it may be found. Despite various attempts to codify international disaster laws since the 1920s, a right to humanitarian assistance remains contested, reflecting concerns regarding the relative importance of state sovereignty vis-à-vis individual rights under international law. However, the evolving acquis humanitaire of binding and non-binding normative standards for responses to humanitarian crises highlights the increasing focus on rights and responsibilities applicable in disasters; although the International Law Commission has also noted the difficulty of identifying lex lata and lex ferenda regarding the protection of persons in the event of disasters due to the “amorphous state of the law relating to international disaster response.” Therefore, using the conceptual framework of transnational legal process, this thesis analyses the evolving normative frameworks and standards for rights-holders and duty-bearers in disasters. Determining the process whereby rights are created and evolve, and their potential internalisation into domestic law and policy, provides a powerful analytical framework for examining the progress and challenges of developing accountable responses to major disasters.