High speed nonlinear optical components for next-generation optical communications

Electronic signal processing systems currently employed at core internet routers require huge amounts of power to operate and they may be unable to continue to satisfy consumer demand for more bandwidth without an inordinate increase in cost, size and/or energy consumption. Optical signal processing techniques may be deployed in next-generation optical networks for simple tasks such as wavelength conversion, demultiplexing and format conversion at high speed (≥100Gb.s-1) to alleviate the pressure on existing core router infrastructure. To implement optical signal processing functionalities, it is necessary to exploit the nonlinear optical properties of suitable materials such as III-V semiconductor compounds, silicon, periodically-poled lithium niobate (PPLN), highly nonlinear fibre (HNLF) or chalcogenide glasses. However, nonlinear optical (NLO) components such as semiconductor optical amplifiers (SOAs), electroabsorption modulators (EAMs) and silicon nanowires are the most promising candidates as all-optical switching elements vis-à-vis ease of integration, device footprint and energy consumption. This PhD thesis presents the amplitude and phase dynamics in a range of device configurations containing SOAs, EAMs and/or silicon nanowires to support the design of all optical switching elements for deployment in next-generation optical networks. Time-resolved pump-probe spectroscopy using pulses with a pulse width of 3ps from mode-locked laser sources was utilized to accurately measure the carrier dynamics in the device(s) under test. The research work into four main topics: (a) a long SOA, (b) the concatenated SOA-EAMSOA (CSES) configuration, (c) silicon nanowires embedded in SU8 polymer and (d) a custom epitaxy design EAM with fast carrier sweepout dynamics. The principal aim was to identify the optimum operation conditions for each of these NLO device configurations to enhance their switching capability and to assess their potential for various optical signal processing functionalities. All of the NLO device configurations investigated in this thesis are compact and suitable for monolithic and/or hybrid integration.

Energy-aware dynamic route management for THAWS

In this research we focus on the Tyndall 25mm and 10mm nodes energy-aware topology management to extend sensor network lifespan and optimise node power consumption. The two tiered Tyndall Heterogeneous Automated Wireless Sensors (THAWS) tool is used to quickly create and configure application-specific sensor networks. To this end, we propose to implement a distributed route discovery algorithm and a practical energy-aware reaction model on the 25mm nodes. Triggered by the energy-warning events, the miniaturised Tyndall 10mm data collector nodes adaptively and periodically change their association to 25mm base station nodes, while 25mm nodes also change the inter-connections between themselves, which results in reconfiguration of the 25mm nodes tier topology. The distributed routing protocol uses combined weight functions to balance the sensor network traffic. A system level simulation is used to quantify the benefit of the route management framework when compared to other state of the art approaches in terms of the system power-saving.

Remote electricity actuation and monitoring mote

This work presents the design and evaluation of the REAM (Remote Electricity Actuation and Monitoring) node based around the modular Tyndall Mote platform. The REAM node enables the user to remotely actuate power to a mains power extension board while sampling the current, voltage, power and power factor of the attached load. The node contains a current transformer interfaced to an Energy Metering IC which continuously samples current and voltage. These values are periodically read from the part by a PIC24 microcontroller, which calculates the RMS current and voltage, power factor and overall power. The resultant values can then be queried wirelessly employing the Tyndall 802.15.4 compliant wireless module.

Prediction and prevention of venous thrombosis in pregnancy

Venous thromboembolism (VTE) remains the leading cause of maternal mortality. Reports identified further research is required in obese and women post caesarean section (CS). Risk factors for VTE during pregnancy are periodically absent indicating the need for a simple and effective screening tool for pregnancy. Perturbation of the uteroplacental haemostasis has been implicated in placenta mediated pregnancy complications. This thesis had 4 main aims: 1) To investigate anticoagulant effects following a fixed thromboprophylaxis dose in healthy women post elective CS. 2) To evaluate the calibrated automated thrombogram (CAT) assay as a potential predictive tool for thrombosis in pregnancy. 3) To compare the anticoagulant effects of fixed versus weight adjusted thromboprophylaxis dose in morbidly obese pregnant women. 4) To investigate the LMWH effects on human haemostatic gene and antigen expression in placentae and plasma from the uteroplacental , maternal and fetal circulation. Tissue factor pathway inhibitor (TFPI), thrombin antithrombin (TAT), CAT and anti-Xa levels were analysed. Real-time PCR and ELISA were used to quantify mRNA and protein expression of TFPI and TF in placental tissue. In women post CS, anti-Xa levels do not reflect the full anticoagulant effects of LMWH. LMWH thromboprophylaxis in this healthy cohort of patients appears to have a sustained effect in reducing excess thrombin production post elective CS. The results of this study suggest that predicting VTE in pregnant women using CAT assay is not possible at present time. The prothrombotic state in pregnant morbidly obese women was substantially attenuated by weight adjusted but not at fixed LMWH doses. LMWH may be effective in reducing in- vivo thrombin production in the uteroplacental circulation of thrombophilic women. All these results collectively suggest that at appropriate dosage, LMWH is effective in attenuating excess thrombin generation, in low risk pregnant women post caesarean section or moderate to high risk pregnant women who are morbidly obese or tested positive for thrombophilia. The results of the studies provided data to inform evidence-based practice to improve the outcome for pregnant women at risk of thrombosis.

Shaken not stirred: creating exotic angular momentum states by shaking an optical lattice

We propose a method to create higher orbital states of ultracold atoms in the Mott regime of an optical lattice. This is done by periodically modulating the position of the trap minima (known as shaking) and controlling the interference term of the lasers creating the lattice. These methods are combined with techniques of shortcuts to adiabaticity. As an example of this, we show specifically how to create an anti-ferromagnetic type ordering of angular momentum states of atoms. The specific pulse sequences are designed using Lewis-Riesenfeld invariants and a fourlevel model for each well. The results are compared with numerical simulations of the full Schrodinger equation.