Development of miniaturized wireless sensor nodes suitable for building energy management and modelling

Buildings consume 40% of Ireland's total annual energy translating to 3.5 billion (2004). The EPBD directive (effective January 2003) places an onus on all member states to rate the energy performance of all buildings in excess of 50m2. Energy and environmental performance management systems for residential buildings do not exist and consist of an ad-hoc integration of wired building management systems and Monitoring & Targeting systems for non-residential buildings. These systems are unsophisticated and do not easily lend themselves to cost effective retrofit or integration with other enterprise management systems. It is commonly agreed that a 15-40% reduction of building energy consumption is achievable by efficiently operating buildings when compared with typical practice. Existing research has identified that the level of information available to Building Managers with existing Building Management Systems and Environmental Monitoring Systems (BMS/EMS) is insufficient to perform the required performance based building assessment. The cost of installing additional sensors and meters is extremely high, primarily due to the estimated cost of wiring and the needed labour. From this perspective wireless sensor technology provides the capability to provide reliable sensor data at the required temporal and spatial granularity associated with building energy management. In this paper, a wireless sensor network mote hardware design and implementation is presented for a building energy management application. Appropriate sensors were selected and interfaced with the developed system based on user requirements to meet both the building monitoring and metering requirements. Beside the sensing capability, actuation and interfacing to external meters/sensors are provided to perform different management control and data recording tasks associated with minimisation of energy consumption in the built environment and the development of appropriate Building information models(BIM)to enable the design and development of energy efficient spaces.

The impact of new public management on the roles of elected councillors, management and the community sector in Irish local government: a case study of Cork County Council

The fundamental aim of this thesis is to examine the effect of New Public Management (NPM) on the traditional roles of elected representatives, management and community activists in Irish local government. This will be achieved through a case study analysis of one local authority, Cork County Council. NPM promises greater democracy in decision-making. Therefore, one can hypothesise that the roles of the three key groupings identified will become more influenced by principles of participatory decision-making. Thus, a number of related questions will be addressed by this work, such as, have the local elected representatives been empowered by NPM? Has a managerial revolution taken place? Has local democracy been enhanced by more effective community participation? It will be seen in chapter 2 that these questions have not been adequately addressed to date in NPM literature. The three groups identified can be regarded as stakeholders although the researcher is cautious in using this term because of its value-laden nature. Essentially, in terms of Cork County Council, stakeholders can be defined as decision-makers and people within the organization and its environment who are interested in or could be affected directly or indirectly by organizational performance. This is an all-embracing definition and includes all citizens, residents, community groups and client organizations. It is in this context that the term 'stakeholder' should be understood when it is occasionally used in this thesis. In this case, the perceptions of elected councilors, management and community representatives with regard to their changing roles are as significant as the changes themselves. The chapter begins with a brief account of the background to this research. This is followed by an explanation of the methodology which is used and then concludes with short statements about the remaining chapters in the thesis.

A knowledge management system to optimise comfort throughout the building life-cycle

Comfort is, in essence, satisfaction with the environment, and with respect to the indoor environment it is primarily satisfaction with the thermal conditions and air quality. Improving comfort has social, health and economic benefits, and is more financially significant than any other building cost. Despite this, comfort is not strictly managed throughout the building lifecycle. This is mainly due to the lack of an appropriate system to adequately manage comfort knowledge through the construction process into operation. Previous proposals to improve knowledge management have not been successfully adopted by the construction industry. To address this, the BabySteps approach was devised. BabySteps is an approach, proposed by this research, which states that for an innovation to be adopted into the industry it must be implementable through a number of small changes. This research proposes that improving the management of comfort knowledge will improve comfort. ComMet is a new methodology proposed by this research that manages comfort knowledge. It enables comfort knowledge to be captured, stored and accessed throughout the building life-cycle and so allowing it to be re-used in future stages of the building project and in future projects. It does this using the following: Comfort Performances – These are simplified numerical representations of the comfort of the indoor environment. Comfort Performances quantify the comfort at each stage of the building life-cycle using standard comfort metrics. Comfort Ratings - These are a means of classifying the comfort conditions of the indoor environment according to an appropriate standard. Comfort Ratings are generated by comparing different Comfort Performances. Comfort Ratings provide additional information relating to the comfort conditions of the indoor environment, which is not readily determined from the individual Comfort Performances. Comfort History – This is a continuous descriptive record of the comfort throughout the project, with a focus on documenting the items and activities, proposed and implemented, which could potentially affect comfort. Each aspect of the Comfort History is linked to the relevant comfort entity it references. These three components create a comprehensive record of the comfort throughout the building lifecycle. They are then stored and made available in a common format in a central location which allows them to be re-used ad infinitum. The LCMS System was developed to implement the ComMet methodology. It uses current and emerging technologies to capture, store and allow easy access to comfort knowledge as specified by ComMet. LCMS is an IT system that is a combination of the following six components: Building Standards; Modelling & Simulation; Physical Measurement through the specially developed Egg-Whisk (Wireless Sensor) Network; Data Manipulation; Information Recording; Knowledge Storage and Access.Results from a test case application of the LCMS system - an existing office room at a research facility - highlighted that while some aspects of comfort were being maintained, the building’s environment was not in compliance with the acceptable levels as stipulated by the relevant building standards. The implementation of ComMet, through LCMS, demonstrates how comfort, typically only considered during early design, can be measured and managed appropriately through systematic application of the methodology as means of ensuring a healthy internal environment in the building.

The knowledge, attitudes and beliefs of patients and their healthcare professionals around oral dosage form modification: a systematic review of the qualitative literature

Objectives: The objective of this systematic review was to synthesize the available qualitative evidence on the knowledge, attitudes and beliefs of adult patients, healthcare professionals and carers about oral dosage form modification. Design: A systematic review and synthesis of qualitative studies was undertaken, utilising the thematic synthesis approach. Data sources: The following databases were searched from inception to September 2015: PubMed, Medline (EBSCO), EMBASE, CINAHL, PsycINFO, Web of Science, ProQuest Databases, Scopus, Turning Research Into Practice (TRIP), Cochrane Central Register of Controlled Trials (CENTRAL) and the Cochrane Database of Systematic Reviews (CDSR). Citation tracking and searching the references lists of included studies was also undertaken. Grey literature was searched using the OpenGrey database, internet searching and personal knowledge. An updated search was undertaken in June 2016. Review methods: Studies meeting the following criteria were eligible for inclusion; (i) used qualitative data collection and analysis methods; (ii) full-text was available in English; (iii) included adult patients who require oral dosage forms to be modified to meet their needs or; (iv) carers or healthcare professionals of patients who require oral dosage forms to be modified. Two reviewers independently appraised the quality of the included studies using the Critical Appraisal Skills Programme Checklist. A thematic synthesis was conducted and analytical themes were generated. Results: Of 5455 records screened, seven studies were eligible for inclusion; three involved healthcare professionals and the remaining four studies involved patients. Four analytical themes emerged from the thematic synthesis: (i) patient-centred individuality and variability; (ii) communication; (iii) knowledge and uncertainty and; (iv) complexity. The variability of individual patient’s requirements, poor communication practices and lack of knowledge about oral dosage form modification, when combined with the complex and multi-faceted healthcare environment complicate decision making regarding oral dosage form modification and administration. Conclusions: This systematic review has highlighted the key factors influencing the knowledge, attitudes and beliefs of patients and healthcare professionals about oral dosage form modifications. The findings suggest that in order to optimise oral medicine modification practices the needs of individual patients should be routinely and systematically assessed and decision-making should be supported by evidence based recommendations with multidisciplinary input. Further research is needed to optimise oral dosage form modification practices and the factors identified in this review should be considered in the development of future interventions.

Knowledge, attitudes and beliefs of parents regarding fever in children: a Danish interview study

Aim: Fever and febrile illness are some of the most common conditions managed by parents. The aim of this study was to examine the knowledge, attitudes and beliefs of parents around fever in children under five years of age. Methods: Between July and August 2014, a convenience sample of parents was invited to participate in this study in Copenhagen, Denmark. Results were analysed thematically using a constant comparison method. Results: Twenty-one parents participated in the study. Five themes emerged from the data: parental concern, help-seeking behaviour, parental knowledge, parent fever management practices and initiatives. Parents used a range of information sources to obtain their knowledge on management of fever; however, due to issues of trust with these sources, reassurance was often sought from healthcare practitioners. There was a desire amongst most parents for initiatives to be introduced which provide general information on how to manage fever in children. Conclusion: Parents were very concerned when their child was febrile and instigated practices obtained from accessible information sources. This study has identified a need for specific and reliable information initiatives to be introduced as a means of reducing parental concern and ensuring evidence-based strategies for managing a child with fever.