The role of bacterial interspecies communication in polymicrobial infection of the cystic fibrosis lung

There is an increasing appreciation of the polymicrobial nature of bacterial infections associated with Cystic Fibrosis (CF) and of the important role for interactions in influencing bacterial virulence and response to therapy. Patients with CF are co-infected with Pseudomonas aeruginosa, Burkholderia cenocepacia and Stenotrophomonas maltophilia. These latter bacteria produce signal molecules of the diffusible signal factor (DSF) family, which are cis-2-unsaturated fatty acids. Previous studies showed that DSF from S. maltophilia leads to altered biofilm formation and increased tolerance to antibiotics in P. aeruginosa and that these responses require the P. aeruginosa sensor kinase PA1396. The work in this thesis aims of further elucidate the influence and mechanism of DSF signalling on P. aeruginosa and examine the role that such interspecies signalling play in infection of the CF airway. Next generation sequencing technologies targeting the 16S ribosomal RNA gene were applied to DNA and RNA isolated from sputum taken from cohorts of CF and non-CF subjects to characterise the bacterial community. In parallel, metabolomics analysis of sputum provided insight into the environment of the CF airway. This analysis revealed a number of observations including; that differences in metabolites occur in sputum taken from clinically stable CF patients and those with exacerbation and DNA- and RNA-based methods suggested that a strong relationship existed between the abundance of specific strict anaerobes and fluctuations in the level of metabolites during exacerbation. DSF family signals were also detected in the sputum and a correlation with the presence of DSFproducing organisms was observed. To examine the signal transduction mechanisms used by P. aeruginosa, bioinformatics with site directed mutagenesis were employed to identify signalling partners for PA1396. A pathway suggesting a role for a number of proteins in the regulation of several factors following DSF recognition by PA1396 were observed.

Biased group decision-making and the effect of computer-mediated communication: separating the effects of anonymity, voting and blind picking

The influence of communication technology on group decision-making has been examined in many studies. But the findings are inconsistent. Some studies showed a positive effect on decision quality, other studies have shown that communication technology makes the decision even worse. One possible explanation for these different findings could be the use of different Group Decision Support Systems (GDSS) in these studies, with some GDSS better fitting to the given task than others and with different sets of functions. This paper outlines an approach with an information system solely designed to examine the effect of (1) anonymity, (2) voting and (3) blind picking on decision quality, discussion quality and perceived quality of information.

Coherent wavelength division multiplexing: a novel transmission format for high spectral density optical communication networks

In this thesis a novel transmission format, named Coherent Wavelength Division Multiplexing (CoWDM) for use in high information spectral density optical communication networks is proposed and studied. In chapter I a historical view of fibre optic communication systems as well as an overview of state of the art technology is presented to provide an introduction to the subject area. We see that, in general the aim of modern optical communication system designers is to provide high bandwidth services while reducing the overall cost per transmitted bit of information. In the remainder of the thesis a range of investigations, both of a theoretical and experimental nature are carried out using the CoWDM transmission format. These investigations are designed to consider features of CoWDM such as its dispersion tolerance, compatibility with forward error correction and suitability for use in currently installed long haul networks amongst others. A high bit rate optical test bed constructed at the Tyndall National Institute facilitated most of the experimental work outlined in this thesis and a collaboration with France Telecom enabled long haul transmission experiments using the CoWDM format to be carried out. An amount of research was also carried out on ancillary topics such as optical comb generation, forward error correction and phase stabilisation techniques. The aim of these investigations is to verify the suitability of CoWDM as a cost effective solution for use in both current and future high bit rate optical communication networks

Systematic delay-driven power optimisation and power-driven delay optimisation of combinational circuits

With the proliferation of mobile wireless communication and embedded systems, the energy efficiency becomes a major design constraint. The dissipated energy is often referred as the product of power dissipation and the input-output delay. Most of electronic design automation techniques focus on optimising only one of these parameters either power or delay. Industry standard design flows integrate systematic methods of optimising either area or timing while for power consumption optimisation one often employs heuristics which are characteristic to a specific design. In this work we answer three questions in our quest to provide a systematic approach to joint power and delay Optimisation. The first question of our research is: How to build a design flow which incorporates academic and industry standard design flows for power optimisation? To address this question, we use a reference design flow provided by Synopsys and integrate in this flow academic tools and methodologies. The proposed design flow is used as a platform for analysing some novel algorithms and methodologies for optimisation in the context of digital circuits. The second question we answer is: Is possible to apply a systematic approach for power optimisation in the context of combinational digital circuits? The starting point is a selection of a suitable data structure which can easily incorporate information about delay, power, area and which then allows optimisation algorithms to be applied. In particular we address the implications of a systematic power optimisation methodologies and the potential degradation of other (often conflicting) parameters such as area or the delay of implementation. Finally, the third question which this thesis attempts to answer is: Is there a systematic approach for multi-objective optimisation of delay and power? A delay-driven power and power-driven delay optimisation is proposed in order to have balanced delay and power values. This implies that each power optimisation step is not only constrained by the decrease in power but also the increase in delay. Similarly, each delay optimisation step is not only governed with the decrease in delay but also the increase in power. The goal is to obtain multi-objective optimisation of digital circuits where the two conflicting objectives are power and delay. The logic synthesis and optimisation methodology is based on AND-Inverter Graphs (AIGs) which represent the functionality of the circuit. The switching activities and arrival times of circuit nodes are annotated onto an AND-Inverter Graph under the zero and a non-zero-delay model. We introduce then several reordering rules which are applied on the AIG nodes to minimise switching power or longest path delay of the circuit at the pre-technology mapping level. The academic Electronic Design Automation (EDA) tool ABC is used for the manipulation of AND-Inverter Graphs. We have implemented various combinatorial optimisation algorithms often used in Electronic Design Automation such as Simulated Annealing and Uniform Cost Search Algorithm. Simulated Annealing (SMA) is a probabilistic meta heuristic for the global optimization problem of locating a good approximation to the global optimum of a given function in a large search space. We used SMA to probabilistically decide between moving from one optimised solution to another such that the dynamic power is optimised under given delay constraints and the delay is optimised under given power constraints. A good approximation to the global optimum solution of energy constraint is obtained. Uniform Cost Search (UCS) is a tree search algorithm used for traversing or searching a weighted tree, tree structure, or graph. We have used Uniform Cost Search Algorithm to search within the AIG network, a specific AIG node order for the reordering rules application. After the reordering rules application, the AIG network is mapped to an AIG netlist using specific library cells. Our approach combines network re-structuring, AIG nodes reordering, dynamic power and longest path delay estimation and optimisation and finally technology mapping to an AIG netlist. A set of MCNC Benchmark circuits and large combinational circuits up to 100,000 gates have been used to validate our methodology. Comparisons for power and delay optimisation are made with the best synthesis scripts used in ABC. Reduction of 23% in power and 15% in delay with minimal overhead is achieved, compared to the best known ABC results. Also, our approach is also implemented on a number of processors with combinational and sequential components and significant savings are achieved.

Development of germanium/silicon integration for near infrared detection

Silicon (Si) is the base material for electronic technologies and is emerging as a very attractive platform for photonic integrated circuits (PICs). PICs allow optical systems to be made more compact with higher performance than discrete optical components. Applications for PICs are in the area of fibre-optic communication, biomedical devices, photovoltaics and imaging. Germanium (Ge), due to its suitable bandgap for telecommunications and its compatibility with Si technology is preferred over III-V compounds as an integrated on-chip detector at near infrared wavelengths. There are two main approaches for Ge/Si integration: through epitaxial growth and through direct wafer bonding. The lattice mismatch of ~4.2% between Ge and Si is the main problem of the former technique which leads to a high density of dislocations while the bond strength and conductivity of the interface are the main challenges of the latter. Both result in trap states which are expected to play a critical role. Understanding the physics of the interface is a key contribution of this thesis. This thesis investigates Ge/Si diodes using these two methods. The effects of interface traps on the static and dynamic performance of Ge/Si avalanche photodetectors have been modelled for the first time. The thesis outlines the original process development and characterization of mesa diodes which were fabricated by transferring a ~700 nm thick layer of p-type Ge onto n-type Si using direct wafer bonding and layer exfoliation. The effects of low temperature annealing on the device performance and on the conductivity of the interface have been investigated. It is shown that the diode ideality factor and the series resistance of the device are reduced after annealing. The carrier transport mechanism is shown to be dominated by generation–recombination before annealing and by direct tunnelling in forward bias and band-to-band tunnelling in reverse bias after annealing. The thesis presents a novel technique to realise photodetectors where one of the substrates is thinned by chemical mechanical polishing (CMP) after bonding the Si-Ge wafers. Based on this technique, Ge/Si detectors with remarkably high responsivities, in excess of 3.5 A/W at 1.55 μm at −2 V, under surface normal illumination have been measured. By performing electrical and optical measurements at various temperatures, the carrier transport through the hetero-interface is analysed by monitoring the Ge band bending from which a detailed band structure of the Ge/Si interface is proposed for the first time. The above unity responsivity of the detectors was explained by light induced potential barrier lowering at the interface. To our knowledge this is the first report of light-gated responsivity for vertically illuminated Ge/Si photodiodes. The wafer bonding approach followed by layer exfoliation or by CMP is a low temperature wafer scale process. In principle, the technique could be extended to other materials such as Ge on GaAs, or Ge on SOI. The unique results reported here are compatible with surface normal illumination and are capable of being integrated with CMOS electronics and readout units in the form of 2D arrays of detectors. One potential future application is a low-cost Si process-compatible near infrared camera.

The spiritual and professional impact of stillbirth

Stillbirth is without question one of the most devastating experiences of grief for parents and families. The death of a baby is also a distressing experience for healthcare professionals who share hopes of a live healthy baby at the end of pregnancy. It is a sad reality however, that in Ireland one in 238 babies will die before birth. The creation and nurture of new life in pregnancy is a spiritual experience as a new baby is at the same time experienced and anticipated. There is little in the published literature concerning the spiritual impact of stillbirth on healthcare chaplains who are the main providers of spiritual care for parents and staff colleagues in Irish maternity units. In addition there are few qualitative studies that explore the impact of stillbirth on consultant obstetricians and no published studies on the spiritual impact of stillbirth on bereaved parents. This study explored the spiritual and professional impact of stillbirth on Irish maternity healthcare chaplains, consultant obstetricians and bereaved parents. Following an overall review of spiritual care provision following stillbirth in the Irish maternity services, thematic analysis was used in the first phase of the study following in-depth interviews with maternity healthcare chaplains. Interpretative Phenomenological Analysis was used in the second and third phases with consultant obstetricians and bereaved parents respectively. The data from both maternity healthcare chaplains and consultant obstetricians revealed that stillbirth posed immense personal, spiritual and professional challenges. Chaplains expressed the spiritual and professional impact of stillbirth in terms of perception of their role, suffering, doubt and presence as they provided care for bereaved parents. A review of spiritual care provision in the Irish maternity services revealed a diversity of practice. The data from consultant obstetricians identified considerable personal, professional and spiritual impact following stillbirth that was identified in superordinate themes of human response to stillbirth, weight of professional responsibility, conflict of personal faith and incongruence between personal faith and professional practice. Data from bereaved parents revealed that stillbirth was spiritually challenging and all parents expressed that stillbirth posed considerable challenge to their faith/ belief structure. The parents of only three babies felt that their spiritual needs were adequately addressed while in hospital. The data had six superordinate themes of searching for meaning, maintaining hope, importance of personhood, protective care, questioning core beliefs and relationships. Other findings from the data from bereaved parents outlined the importance of environment of care and communication. This study has revealed the immense impact of stillbirth on healthcare chaplains, consultant obstetricians and most especially the spiritual impact for bereaved parents. Recommendations are made for improvements in clinical and spiritual care for bereaved parents following stillbirth and for staff wellbeing and support initiatives. Further research areas are recommended in the areas of spiritual care, theological reflection, bereavement care, post-mortem consent procedures and staff wellbeing.

Forces of agglomeration and dispersal in rural business networks: a social network analysis

Two concepts in rural economic development policy have been the focus of much research and policy action: the identification and support of clusters or networks of firms and the availability and adoption by rural businesses of Information and Communication Technologies (ICT). From a theoretical viewpoint these policies are based on two contrasting models, with clustering seen as a process of economic agglomeration, and ICT-mediated communication as a means of facilitating economic dispersion. The study’s conceptual framework is based on four interrelated elements: location, interaction, knowledge, and advantage, together with the concept of networks which is employed as an operationally and theoretically unifying concept. The research questions are developed in four successive categories: Policy, Theory, Networks, and Method. The questions are approached using a study of two contrasting groups of rural small businesses in West Cork, Ireland: (a) Speciality Foods, and (b) firms in Digital Products and Services. The study combines Social Network Analysis (SNA) with Qualitative Thematic Analysis, using data collected from semi-structured interviews with 58 owners or managers of these businesses. Data comprise relational network data on the firms’ connections to suppliers, customers, allies and competitors, together with linked qualitative data on how the firms established connections, and how tacit and codified knowledge was sourced and utilised. The research finds that the key characteristics identified in the cluster literature are evident in the sample of Speciality Food businesses, in relation to flows of tacit knowledge, social embedding, and the development of forms of social capital. In particular the research identified the presence of two distinct forms of collective social capital in this network, termed “community” and “reputation”. By contrast the sample of Digital Products and Services businesses does not have the form of a cluster, but matches more closely to dispersive models, or “chain” structures. Much of the economic and social structure of this set of firms is best explained in terms of “project organisation”, and by the operation of an individual rather than collective form of “reputation”. The rural setting in which these firms are located has resulted in their being service-centric, and consequently they rely on ICT-mediated communication in order to exchange tacit knowledge “at a distance”. It is this factor, rather than inputs of codified knowledge, that most strongly influences their operation and their need for availability and adoption of high quality communication technologies. Thus the findings have applicability in relation to theory in Economic Geography and to policy and practice in Rural Development. In addition the research contributes to methodological questions in SNA, and to methodological questions about the combination or mixing of quantitative and qualitative methods.

Market-oriented new product development of health promoting foods for the ageing population

Major factors influencing food development and food marketing strategies in global market places at present can be attributable to the changing age structure of the population. The significant shifts in global age structure will inevitably lead to the number of people aged 60 reaching an all-time high of one billion by the year 2020. The rapidly growing population of ageing people globally represents a large, neglected and very much under-developed category within the Food Industry. The primary focus of this study was the integration of knowledge creation techniques at early NPD stages, for the development of market-oriented new health promoting foods for the ageing population. The methodology of this study was centered on an exploratory sequential mixed methods strategy. Stage one of the study involved in-depth semi-structured interviews with 16 Stakeholders to facilitate the need identification stage of the NPD process. The main outputs identified were the need for: the fortification of foods for a preventative nutrition approach, the development of foods that targeted age-related conditions such as cognitive, heart, gut and bone health, the integration of ageing compensatory packaging adaptations and the creation of marketing messages with an active lifestyle message. Stage two consisted of a market-oriented computer assisted NPD technique, a user centered design interaction (UCD) to integrate consumers as co-creators throughout the idea generation stage of the NPD process. The most important product attributes identified in this stage included: products targeted at brain and cognitive health, liquid based beverages, easy to use packaging with environmentally friendly elements, simplistic marketing with a clear focus on health not age and realistic health claims constructed with consumer friendly terminology. Finally, Stage three used an abbreviated means-end chain (MEC) analysis to complete the concept development stage of the NPD process. This stage identified commercial information that could be used by food firms for the development of positioning and communication strategies. Equally, the information generated could be of high strategic importance to governments, policy makers, health professionals and medical professionals. The values and goals listed in this stage included: better overall health, active lifestyle, optimum nutrition and wellbeing feelings. Overall, this research illustrated that knowledge creation techniques can assist firms in the development of market-oriented health promoting foods for the ageing population.

Behavioural and neurochemical consequences of chronic gut microbiota depletion during adulthood in the rat

Gut microbiota colonization is a key event for host physiology that occurs early in life. Disruption of this process leads to altered brain development which ultimately manifests as changes in brain function and behaviour in adulthood. Studies using germ-free mice highlight the extreme impact on brain health that results from life without commensal microbes, however the impact of microbiota disturbances occurring in adulthood is less studied. To this end, we depleted the gut microbiota of 10-week-old male Sprague Dawley rats via chronic antibiotic treatment. Following this marked, sustained depletion of the gut bacteria, we investigated behavioural and molecular hallmarks of gut-brain communication. Our results reveal that depletion of the gut microbiota during adulthood results in deficits in spatial memory as tested by Morris water maze, increased visceral sensitivity and a greater display of depressive-like behaviours in the forced swim test. In tandem with these clear behavioural alterations we found change in altered CNS serotonin concentration along with changes in the mRNA levels of corticotrophin releasing hormone receptor 1 and glucocorticoid receptor. Additionally, we found changes in the expression of BDNF, a hallmark of altered microbiota-gut-brain axis signaling. In summary, this model of antibiotic-induced depletion of the gut microbiota can be used for future studies interested in the impact of the gut microbiota on host health without the confounding developmental influence of early-life microbial alterations.