Ballineaspigmore and Bishopstown House

Ballineaspig, anglicised Bishopstown, consists of two townlands which are Ballineaspigmore and Ballineaspigbeg. Taken together, both townlands oc­cupy an area identifiable in modern day terms as lying approximately be­tween the old Glasheen National School on the east side and what was, until recently, the University Farm Curraheen Road on the west. A townland is the smallest administrative land division in Ireland. Historians and other scholars are as yet inconclusive about the origins of these divisions. They are certainly as old as the seventeenth century. The townland with which this booklet is concerned is known as Ballineaspigmore. It extends west from the new Regional Hospital at Wilton and includes modern housing estates such as Uam-Var, Benvoirlich and Firgrove. The simplest translation of the townland name is the large land division of the bishop. To clarify a popular misconception, Bishopstown does not derive its name from the fact that in the early eighteenth century a bishop of Cork built his country residence there. The name is much older and can be found in sources dating back to the sixteenth century.

The Irish House of Lords, 1780-1800: politics and ideology

This thesis covers the Irish House of Lords in the last two decades of its life. A number of important themes run through the work - the regency crisis, patronage, the management of the Lords, the relationship between the Lords and Commons. These themes, explored from different angles, are vital to an understanding of the political role of the upper house in the 1780s and 1790s. This study is confined to the Lords as a political institution and thus its judicial role as final court of appeal, which was restored to it in 1782, will not be explored here. The thesis consists of two parts. Part one examines the structure and powers of the House of Lords while part two looks at the parties and policies of the house. Chapter one discusses the British constitution as imposed upon Ireland. Chapter two suggests the reasons why constitutional changes were introduced in 1782, and looks at the contribution made by the Irish House of Lords in securing these changes. Chapter three explores the various channels of influence which the peers enjoyed. Chapter four explores the sometimes tense relationship between Lords and Commons. Chapter five examines management of the House of Lords by Dublin Castle. Part two, begins at chapter six. This chapter explores the leadership of both parties within the Lords. Chapter seven looks at how patronage was used to reward those who were loyal to the government. Chapter eight explores the influence of the Whig opposition. Chapter nine looks at the controversial attempts made by Pitt and his ministry during the 1790s to win the support of catholics and turn them from the lure of French ideas, and of the response of the peers to these attempts. Chapter ten is concerned with the relationship between the peers of the House of Lords and the lords lieutenant during the 1790s. Chapter eleven looks at the Union and the House of Lords and attempts to answer the question historians have long asked: why did the Irish parliament and the House of Lords in particular, look favourably on the proposed union of the two kingdoms and the end of their own institution? The House of Lords in the closing decades of the eighteenth century was an institution within which the wealth and power of the kingdom could be found. Its members were politically active, both inside and outside the house. It contained a majority who saw the Crown as the source of stability, but it was a living and evolving political organism and therefore it contained men who believed that the Crown should have its influence limited. This evolution is also demonstrated in its desire for political change in 1782 and 1788. Its last, and perhaps most radical decision, was to vote for its own demise in 1900.

Integrated spot size converters for InP based photonic systems

The ever increasing demand for broadband communications requires sophisticated devices. Photonic integrated circuits (PICs) are an approach that fulfills those requirements. PICs enable the integration of different optical modules on a single chip. Low loss fiber coupling and simplified packaging are key issues in keeping the price of PICs at a low level. Integrated spot size converters (SSC) offer an opportunity to accomplish this. Design, fabrication and characterization of SSCs based on an asymmetric twin waveguide (ATG) at a wavelength of 1.55 μm are the main elements of this dissertation. It is theoretically and experimentally shown that a passive ATG facilitates a polarization filter mechanism. A reproducible InP process guideline is developed that achieves vertical waveguides with smooth sidewalls. Birefringence and resonant coupling are used in an ATG to enable a polarization filtering and splitting mechanism. For the first time such a filter is experimentally shown. At a wavelength of 1610 nm a power extinction ratio of (1.6 ± 0.2) dB was measured for the TE- polarization in a single approximately 372 μm long TM- pass polarizer. A TE-pass polarizer with a similar length was demonstrated with a TM/TE-power extinction ratio of (0.7 ± 0.2) dB at 1610 nm. The refractive indices of two different InGaAsP compositions, required for a SSC, are measured by the reflection spectroscopy technique. A SSC layout for dielectric-free fabricated compact photodetectors is adjusted to those index values. The development and the results of the final fabrication procedure for the ATG concept are outlined. The etch rate, sidewall roughness and selectivity of a Cl2/CH4/H2 based inductively coupled plasma (ICP) etch are investigated by a design of experiment approach. The passivation effect of CH4 is illustrated for the first time. Conditions are determined for etching smooth and vertical sidewalls up to a depth of 5 μm.

An assessment of health in post-medieval Ireland: ‘One vast Lazar house filled with famine, disease and death’

Three indicators of health and diet were selected to examine the health status in three socioeconomic groups in post-medieval Ireland. The aim was to examine the reliability of traditional skeletal markers of health in highly contextualised populations. The link between socio-economic status and health was examined to determine if traditional linking of poor health with poverty was evident in skeletal samples. The analysis indicated that this was indeed the case and that health was significantly compromised in populations of low socio-economic status. Thus it indicated that status intimately influences the physical body form. Sex was also found to be a major defining factor in the response of an individual to physiological stress. It was also evident that contemporary populations may suffer from different physiological stresses, and their responses to those stresses may differ. Adaptation was a key factor here. This has implications for studies of earlier populations that may lack detailed contextual data in terms of blanket applications of interpretations. The results also show a decline in health from the medieval through to the post-medieval period, which is intimately linked with the immense social changes and all the related effects of these. The socio-economic structure of post-medieval Ireland was a direct result of the British policies in Ireland. The physical form of the Irish may be seen to have occurred as a result of those policies, with the Irish poor in particular suffering substantial health problems, even in contrast to the poor of Britain. This study has enriched the recorded historical narrative of this period of the recent past, and highlights more nuanced narratives may emerge from the osteoarchaeological analysis when sound contextual information is available. It also examines a period in Irish history that, until very recently, had been virtually untouched in terms of archaeological study.

At what price? A cost-effectiveness analysis comparing trial of labour after previous caesarean versus elective repeat caesarean delivery

Background: Elective repeat caesarean delivery (ERCD) rates have been increasing worldwide, thus prompting obstetric discourse on the risks and benefits for the mother and infant. Yet, these increasing rates also have major economic implications for the health care system. Given the dearth of information on the cost-effectiveness related to mode of delivery, the aim of this paper was to perform an economic evaluation on the costs and short-term maternal health consequences associated with a trial of labour after one previous caesarean delivery compared with ERCD for low risk women in Ireland.Methods: Using a decision analytic model, a cost-effectiveness analysis (CEA) was performed where the measure of health gain was quality-adjusted life years (QALYs) over a six-week time horizon. A review of international literature was conducted to derive representative estimates of adverse maternal health outcomes following a trial of labour after caesarean (TOLAC) and ERCD. Delivery/procedure costs derived from primary data collection and combined both "bottom-up" and "top-down" costing estimations.Results: Maternal morbidities emerged in twice as many cases in the TOLAC group than the ERCD group. However, a TOLAC was found to be the most-effective method of delivery because it was substantially less expensive than ERCD ((sic)1,835.06 versus (sic)4,039.87 per women, respectively), and QALYs were modestly higher (0.84 versus 0.70). Our findings were supported by probabilistic sensitivity analysis.Conclusions: Clinicians need to be well informed of the benefits and risks of TOLAC among low risk women. Ideally, clinician-patient discourse would address differences in length of hospital stay and postpartum recovery time. While it is premature advocate a policy of TOLAC across maternity units, the results of the study prompt further analysis and repeat iterations, encouraging future studies to synthesis previous research and new and relevant evidence under a single comprehensive decision model.