The ecology of the European hedgehog (Erinaceus europaeus) in rural Ireland

This study on the ecology of Irish hedgehogs (Erinaceus europaeus) has provided information on detection techniques, home range, habitat selection, hedgehog prey, nesting, courtship, genetics, road mortality, parasites, ageing and morphology of this species. Data were obtained from a focal study area in rural Cork, in which 24 radio tagged hedgehogs were monitored from June 2008 to June 2010. Further data were obtained through road kill surveys and the collection of hedgehog carcasses from around Ireland. Hedgehogs of both sexes were found to display philopatry. Habitat was not used in proportion to its availability, but certain habitats were selected and a similar pattern of habitat selection was evident in successive years. Hedgehogs preferred arable land in September and October and, unlike studies elsewhere, were observed to forage in the centre of fields. Badgers were regularly seen at the study site and did not appear to negatively affect hedgehogs’ use of the area. Instead the intra- and inter-habitat distribution of hedgehogs was closely correlated with that of their potential prey. Male hedgehogs had a mean annual home range of 56 ha and females 16.5 ha, although monthly home ranges were much more conservative. Male home range peaked during the breeding season (April-July) and a peak in road deaths was observed during these months. The majority of road kill (54%) were individuals of one year old or less, however, individuals were found up to eight and nine years of age. Genetic analysis showed a distinct lack of genetic variation amongst Irish hedgehogs and suggests colonisation by a small number of individuals. The ectoparasites, Archaeopsylla erinacei, Ixodes hexagonus and Ixodes canisuga were recorded in addition to the endoparasites Crenosoma striatum and Capillaria erinacei. In light of the reported decline in many areas of the hedgehogs’ range, it is a species of conservation concern, and this is the first study examining the ecology of the hedgehog in Ireland.

The ecology of the Irish stoat

The Irish stoat, Mustela erminea hibernica (Thomas and Barrett-Hamilton), has been regarded as an intermediate between the British stoat and the weasel. In this study Irish stoats, mainly from road casualties, were collected and studied. A small number were also live-trapped and radio-tracked. Thus information was gathered on the stoat’s ecology, in particular its form (size and coat colours), reproduction, food habits, parasites, habitat utilisation mortality and predation. The Irish stoats studied were clearly not intermediate in size between British stoats and weasels. They showed considerable size overlap with British stoats, and marked size variation within Ireland. It is argued that size of stoats is determined by food supply early in life. The ventral coat pattern of Irish stoats is apparently unique in the Palaearctic, being similar to that of some stoats found on the west coast of North America. It is argued that this is an example of parallel evolution resulting from adaptation to similar climatic conditions. The stoats were reproductively active in spring and summer. Food consisted mainly of rabbits, but rats, birds, shrews mice and voles were also consumed. Mites were the most numerous ectoparasites, followed by lice, ticks and fleas. Damage by the parasitic nematode Skrjabingylus nasicola was found more frequently in female stoat skulls. Stoats were frequently found in a variety of habitats, both open and wooded. Some of the radio-tracked stoats climbed trees. Dens used were often rat holes. Only one home range, that of a breeding female, was considered to have been accurately measured. It was 22 ha. in size. Mortality is known to have been caused by road accidents and domestic carnivores. It is argued that predation by raptorial birds is important to stoat populations. Results of this study are compared with information available from elsewhere.

Negotiating the boundaries between home and work practices: The case of home-workers

When people work from home, the domains of home and work are co-located, often under one roof. Home-workers have to cope with the meeting of two practices that have traditionally been physically separated. In light of this, we need to understand: how do people who work from home negotiate the boundaries between their home and work practices? What kinds of boundaries do people construct? How do boundaries affect the relationship between home and work as domains? What kinds of boundaries are available to home-workers? Are home-workers in charge of their boundaries or do they co-create them with others? How does this position home-workers in their domains? In order to address these questions, I analysed a variety of data, including newspaper columns, online forum discussions, interviews, and personal diary entries, using a discourse analytic approach that lends itself to issues of positioning. Current literature clashes over whether home-workers are in control of their boundaries, and over the relationship between home and work that arises out of boundary negotiations, i.e. whether home and work are dichotomous or layered. I seek to contribute to boundary theory by adopting a practice theory stance (Wenger, 1998) to guide my analysis. By viewing home and work as practices, I show that boundary negotiations depend on how home-workers are positioned, e.g. if they are positioned as peripheral in a domain, they lack influence over boundaries. I demonstrate that home and work constitute a number of different practices, rather than a rigid dichotomy, and that the way home and work are related are not the same for all home-workers. The application of practice concepts further shows how relationships between practices are created. The contribution of this work is a reconceptualisation of current boundary theory away from individual and cognitive notions (Nippert-Eng, 1996) into the realm of positioning.

Hearing family carers: report on research undertaken with family carers in Cork

This report details the findings of research undertaken with family carers in Cork during 2007 – 2008. The research was undertaken to elicit the views and experiences of family carers, and in so doing, to gain insight into their perspectives on family caring and on associated support mechanisms. It is hoped that, thereafter, policy can draw on these observations. Three key themes emerged from the research itself. These are (i) the role and position of the family carer in society, (ii) the process of family caring itself and (iii) access to and knowledge of key support services. This report, then, draws attention to the extent and dynamics of family caring, as seen through the opinions and experiences of carers located in and nearby Cork city. It has the following format. In the first instance we turn our attention to a discussion of family caring in Ireland, and associated supports more generally. This includes a discussion on key issues arising in the general discourse around family caring in Ireland and internationally, in order to provide a context from which to locate the experiences of carers involved in this research study. Thereafter, we detail the methodology employed in this research study, which followed a method of research enquiry that values the input of participants from the early stages of research focus and design, and which incorporates qualitative and quantitative methods of enquiry. The research was conceptualised and developed in conjunction with The Carers Association, Cork in keeping with an approach to social research that attempts to link academic and activist/advocacy interests. Its aims were to identify issues that family carers in the locality considered important, with a view to contributing to local knowledge, providing a forum for ongoing research, and to informing policy developments on carers. The focus of the report then turns to profiling carers who participated in the research, examining the care they provide, and discussing support they receive from family, friends and neighbours – from informal sources. We then look to the access carers have to formal and public, community-based support services. We examine their experiences of, and concerns with regard to some of these key services, and look at ways that such issues might be addressed. The next section concentrates on financial supports, a range of which are available to carers, for instance, to supplement income and to assist with home renovations. We look at their uptake and issues arising, again with a view to understanding and addressing them from the perspectives of the service users. Finally, the report turns its attention to aspirations that carers have for themselves; in terms of their own personal, training, and employment options. The report concludes by drawing attention to key issues discussed throughout and makes a number of key recommendations, aimed at addressing the voiced opinions and experiences of carers that have emerged through the research.

Biodiversity change in the Irish uplands - the effects of grazing management

As a prominent form of land use across much of upland Europe, extensive livestock grazing may hold the key to the sustainable management of these landscapes. Recent agricultural policy reform, however, has resulted in a decline in upland sheep numbers, prompting concern for the biodiversity value of these areas. This study quantifies the effects of varying levels of grazing management on plant, ground beetle and breeding bird diversity and assemblage in the uplands and lowlands of hill sheep farms in County Kerry, Ireland. Farms represent a continuum of light to heavy grazing, measured using a series of field indicators across several habitats, such as the internationally important blanket bog, home to the ground beetle, Carabus clatratus. Linear mixed effects modelling and non-metric multidimensional scaling are employed to disentangle the most influential management and environmental factors. Grazing state may be determined by the presence of Molinia caerulea or Nardus stricta, and variables such as % traditional ewes, % vegetation litter and % scrub prove valuable indicators of diversity. Measures of ecosystem functioning, e.g. plant biomass (nutrient cycling) and % vegetation cover (erosion rates) are influenced by plant diversity, which is influenced by grazing management. Levels of the ecosystem service, soil organic carbon, vary with ground beetle abundance and diversity, potentially influencing carbon sequestration and thereby climate change. The majority of species from all three taxa are found in the lowlands, with the exception of birds such as meadow pipit and skylark. The scale of measurement should be determined by the size and mobility of the species in question. The challenge is to manage these high nature value landscapes using agri-environment schemes which enhance biodiversity by maintaining structural heterogeneity across a range of scales, altitudes and habitats whilst integrating the decisions of people living and working in these marginal areas.

Home, family and society: women of the Irish landed class, 1860-1914. A Munster case study

The thesis analyses the roles and experiences of female members of the Irish landed class (wives, sisters and daughters of gentry and aristocratic landlords with estates over 1,000 acres) using primary personal material generated by twelve sample families over an important period of decline for the class, and growing rights for women. Notably, it analyses the experiences of relatively unknown married and unmarried women, something previously untried in Irish historiography. It demonstrates that women’s roles were more significant than has been assumed in the existing literature, and leads to a more rounded understanding of the entire class. Four chapters focus on themes which emerge from the sources used and which deal with their roles both inside and outside the home. These chapters argue that: Married and unmarried women were more closely bound to the priorities of their class than their sex, and prioritised male-centred values of family and estate. Male and female duties on the property overlapped, as marriage relationships were more equal than the legislation of the time would suggest. London was the cultural centre for this class. Due to close familial links with Britain (60% of sample daughters married English men) their self-perception was British or English, as well as Irish. With the self-confidence of their class, these women enjoyed cultural and political activities and movements outside the home (sport, travel, fashion, art, writing, philanthropy, (anti-)suffrage, and politics). Far from being pawns in arranged marriages, women were deeply conscious of their marriage decisions and chose socially, financially and personally compatible husbands; they also looked for sexual satisfaction. Childbirth sometimes caused lasting health problems, but pregnancy did not confine wealthy women to an invalid state. In opposition to the stereotypical distant aristocratic mother, these women breastfed their children, and were involved mothers. However, motherhood was not permitted to impinge on the more pressing role of wife

Atomic layer deposition of copper for CMOS interconnects

This work concerns the atomic layer deposition (ALD) of copper. ALD is a technique that allows conformal coating of difficult topographies such as narrow trenches and holes or even shadowed regions. However, the deposition of pure metals has so far been less successful than the deposition of oxides except for a few exceptions. Challenges include difficulties associated with the reduction of the metal centre of the precursor at reasonable temperatures and the tendency of metals to agglomerate during the growth process. Cu is a metal of special technical interest as it is widely used for interconnects on CMOS devices. These interconnects are usually fabricated by electroplating, which requires the deposition of thin Cu seed layers onto the trenches and vias. Here, ALD is regarded as potential candidate for replacing the current PVD technique, which is expected to reach its limitations as the critical dimensions continue to shrink. This work is separated into two parts. In the first part, a laboratory-scale ALD reactor was constructed and used for the thermal ALD of Cu. In the second part, the potentials of the application of Cu ALD on industry scale fabrication were examined in a joint project with Applied Materials and Intel. Within this project precursors developed by industrial partners were evaluated on a 300 mm Applied Materials metal-ALD chamber modified with a direct RF-plasma source. A feature that makes ALD a popular technique among researchers is the possibility to produce high- level thin film coatings for micro-electronics and nano-technology with relatively simple laboratory- scale reactors. The advanced materials and surfaces group (AMSG) at Tyndall National Institute operates a range of home-built ALD reactors. In order to carry out Cu ALD experiments, modifications to the normal reactor design had to be made. For example a carrier gas mechanism was necessary to facilitate the transport of the low-volatile Cu precursors. Precursors evaluated included the readily available Cu(II)-diketonates Cu-bis(acetylacetonate), Cu-bis(2,2,6,6-tetramethyl-hepta-3,5-dionate) and Cu-bis(1,1,1,5,5,5-hexafluoacetylacetonate) as well as the Cu-ketoiminate Cu-bis(4N-ethylamino- pent-3-en-2-onate), which is also known under the trade name AbaCus (Air Liquide), and the Cu(I)- silylamide 1,3-diisopropyl-imidazolin-2-ylidene Cu(I) hexamethyldisilazide ([NHC]Cu(hmds)), which was developed at Carleton University Ottawa. Forming gas (10 % H2 in Ar) was used as reducing agent except in early experiments where formalin was used. With all precursors an extreme surface selectivity of the deposition process was observed and significant growth was only achieved on platinum-group metals. Improvements in the Cu deposition process were obtained with [NHC]Cu(hmds) compared with the Cu(II) complexes. A possible reason is the reduced oxidation state of the metal centre. Continuous Cu films were obtained on Pd and indications for saturated growth with a rate of about 0.4 Å/cycle were found for deposition at 220 °C. Deposits obtained on Ru consisted of separated islands. Although no continuous films could be obtained in this work the relatively high density of Cu islands obtained was a clear improvement as compared to the deposits grown with Cu(II) complexes. When ultra-thin Pd films were used as substrates, island growth was also observed. A likely reason for this extreme difference to the Cu films obtained on thicker Pd films is the lack of stress compensation within the thin films. The most likely source of stress compensation in the thicker Pd films is the formation of a graded interlayer between Pd and Cu by inter-diffusion. To obtain continuous Cu films on more materials, reduction of the growth temperature was required. This was achieved in the plasma assisted ALD experiments discussed in the second part of this work. The precursors evaluated included the AbaCus compound and CTA-1, an aliphatic Cu-bis(aminoalkoxide), which was supplied by Adeka Corp.. Depositions could be carried out at very low temperatures (60 °C Abacus, 30 °C CTA-1). Metallic Cu could be obtained on all substrate materials investigated, but the shape of the deposits varied significantly between the substrate materials. On most materials (Si, TaN, Al2O3, CDO) Cu grew in isolated nearly spherical islands even at temperatures as low as 30 °C. It was observed that the reason for the island formation is the coalescence of the initial islands to larger, spherical islands instead of forming a continuous film. On the other hand, the formation of nearly two-dimensional islands was observed on Ru. These islands grew together forming a conductive film after a reasonably small number of cycles. The resulting Cu films were of excellent crystal quality and had good electrical properties; e.g. a resistivity of 2.39 µΩ cm was measured for a 47 nm thick film. Moreover, conformal coating of narrow trenches (1 µm deep 100/1 aspect ratio) was demonstrated showing the feasibility of the ALD process.