Applications of finite element computer modelling and thermal infrared remote sensing to the study of geothermal anomalies

Buried heat sources can be investigated by examining thermal infrared images and comparing these with the results of theoretical models which predict the thermal anomaly a given heat source may generate. Key factors influencing surface temperature include the geometry and temperature of the heat source, the surface meteorological environment, and the thermal conductivity and anisotropy of the rock. In general, a geothermal heat flux of greater than 2% of solar insolation is required to produce a detectable thermal anomaly in a thermal infrared image. A heat source of, for example, 2-300K greater than the average surface temperature must be a t depth shallower than 50m for the detection of the anomaly in a thermal infrared image, for typical terrestrial conditions. Atmospheric factors are of critical importance. While the mean atmospheric temperature has little significance, the convection is a dominant factor, and can act to swamp the thermal signature entirely. Given a steady state heat source that produces a detectable thermal anomaly, it is possible to loosely constrain the physical properties of the heat source and surrounding rock, using the surface thermal anomaly as a basis. The success of this technique is highly dependent on the degree to which the physical properties of the host rock are known. Important parameters include the surface thermal properties and thermal conductivity of the rock. Modelling of transient thermal situations was carried out, to assess the effect of time dependant thermal fluxes. One-dimensional finite element models can be readily and accurately applied to the investigation of diurnal heat flow, as with thermal inertia models. Diurnal thermal models of environments on Earth, the Moon and Mars were carried out using finite elements and found to be consistent with published measurements. The heat flow from an injection of hot lava into a near surface lava tube was considered. While this approach was useful for study, and long term monitoring in inhospitable areas, it was found to have little hazard warning utility, as the time taken for the thermal energy to propagate to the surface in dry rock (several months) in very long. The resolution of the thermal infrared imaging system is an important factor. Presently available satellite based systems such as Landsat (resolution of 120m) are inadequate for detailed study of geothermal anomalies. Airborne systems, such as TIMS (variable resolution of 3-6m) are much more useful for discriminating small buried heat sources. Planned improvements in the resolution of satellite based systems will broaden the potential for application of the techniques developed in this thesis. It is important to note, however, that adequate spatial resolution is a necessary but not sufficient condition for successful application of these techniques.

Osmotic stress tolerance mechanisms in Lactococcus lactis

The response of Lactococcus lactis subsp. cremoris NCDO 712 to low water activity (aw) was investigated, both in relation to growth following moderate reductions in the aw and in terms of survival following substantial reduction of the aw with NaCI. Lc.lactis NCDO 712 was capable of growth in the presence of ≤ 4% w/v NaCI and concentrations in excess of 4% w/v were lethal to the cells. The presence of magnesium ions significantly increased the resistance of NCDO 712 to challenge with NaCI and also to challenge with high temperature or low pH. Survival of Lc.lactis NCDO 712 exposed to high NaCI concentrations was growth phase dependent and cells were most sensitive in the early exponential phase of growth. Pre-exposure to 3% w/v NaCI induced limited protection against subsequent challenge with higher NaCI concentrations. The induction was inhibited by chloramphenicol and even when induced, the response did not protect against NaCI concentrations> 10% w/v. When growing at low aw, potassium was accumulated by Lc. lactis NCDO 712 growing at low aw, if the aw was reduced by glucose or fructose, but not by NaCI. Reducing the potassium concentration of chemically defined medium from 20 to 0.5 mM) produced a substantial reduction in the growth rate, if the aw was reduced with NaCI, but not with glucose or fructose. The reduction of the growth rate correlated strongly with a reduction in the cytoplasmic potassium concentration and in cell volume. Addition of the compatible solute glycine betaine, partially reversed the inhibition of growth rate and partially restored the cell volume. The potassium transport system was characterised in cells grown in medium at both high and low aw. It appeared that a single system was present, which was induced approximately two-fold by growth at low aw. Potassium transport was assayed in vitro using cells depleted of potassium; the assay was competitively inhibited by Na+ and by the other monovalent cations NH4+, Li+, and Cs+. There was a strong correlation between the ability of strains of Lc. lactis subsp. lactis and subsp. cremoris to grow at low aw and their ability to accumulate the compatible solute glycine betaine. The Lc. lactis subsp. cremoris strains incapable of growth at NaCI concentrations> 2% w/v did not accumulate glycine betaine when growing at low aw, whereas strains capable of growth at NaCI concentrations up to 4% w/v did. A mutant, extremely sensitive to low aw was isolated from the parent strain Lc. lactis subsp. cremoris MG 1363, a plasmid free derivative of NCDO 712. The parent strain tolerated up to 4% w/v NaCI and actively accumulated glycine betaine when challenged at low aw. The mutant had lost the ability to accumulate glycine betaine and was incapable of growth at NaCI concentrations >2% w/v or the equivalent concentration of glucose. As no other compatible solute seemed capable of substitution for glycine betaine, the data suggest that the traditional; phenotypic speciation of strains on the basis of tolerance to 4% w/v NaCI can be explained as possession or lack of a glycine betaine transport system.

An investigation of post-primary students' images of mathematics

This research study investigates the image of mathematics held by 5th-year post-primary students in Ireland. For this study, “image of mathematics” is conceptualized as a mental representation or view of mathematics, presumably constructed as a result of past experiences, mediated through school, parents, peers or society. It is also understood to include attitudes, beliefs, emotions, self-concept and motivation in relation to mathematics. This study explores the image of mathematics held by a sample of 356 5th-year students studying ordinary level mathematics. Students were aged between 15 and 18 years. In addition, this study examines the factors influencing students‟ images of mathematics and the possible reasons for students choosing not to study higher level mathematics for the Leaving Certificate. The design for this study is chiefly explorative. A questionnaire survey was created containing both quantitative and qualitative methods to investigate the research interest. The quantitative aspect incorporated eight pre-established scales to examine students‟ attitudes, beliefs, emotions, self-concept and motivation regarding mathematics. The qualitative element explored students‟ past experiences of mathematics, their causal attributions for success or failure in mathematics and their influences in mathematics. The quantitative and qualitative data was analysed for all students and also for students grouped by gender, prior achievement, type of post-primary school attending, co-educational status of the post-primary school and the attendance of a Project Maths pilot school. Students‟ images of mathematics were seen to be strongly indicated by their attitudes (enjoyment and value), beliefs, motivation, self-concept and anxiety, with each of these elements strongly correlated with each other, particularly self-concept and anxiety. Students‟ current images of mathematics were found to be influenced by their past experiences of mathematics, by their mathematics teachers, parents and peers, and by their prior mathematical achievement. Gender differences occur for students in their images of mathematics, with males having more positive images of mathematics than females and this is most noticeable with regards to anxiety about mathematics. Mathematics anxiety was identified as a possible reason for the low number of students continuing with higher level mathematics for the Leaving Certificate. Some students also expressed low mathematical self-concept with regards to higher level mathematics specifically. Students with low prior achievement in mathematics tended to believe that mathematics requires a natural ability which they do not possess. Rote-learning was found to be common among many students in the sample. The most positive image of mathematics held by students was the “problem-solving image”, with resulting implications for the new Project Maths syllabus in post-primary education. Findings from this research study provide important insights into the image of mathematics held by the sample of Irish post-primary students and make an innovative contribution to mathematics education research. In particular, findings contribute to the current national interest in Ireland in post-primary mathematics education, highlighting issues regarding the low uptake of higher level mathematics for the Leaving Certificate and also making a preliminary comparison between students who took part in the piloting of Project Maths and students who were more recently introduced to the new syllabus. This research study also holds implications for mathematics teachers, parents and the mathematics education community in Ireland, with some suggestions made on improving students‟ images of mathematics.

Acoustic behaviour, ecology and social structure of bottlenose dolphins (Tursiops truncatus, Montagu 1821) in the North Atlantic

Communication is important for social and other behavioural interactions in most marine mammal species. The bottlenose dolphin (Tursiops truncatus, Montagu, 1821) is a highly social species that use whistles as communication calls to express identity and to initiate and maintain contact between socially interactive individuals. In this thesis, the degree of variability in whistle behaviour and whistle characteristics was examined between different habitats on a range of spatial scales. The whistle characteristics that best discriminated between different communities were investigated, along with exploration of whistle variation in relation to habitat type, levels of social interaction and relatedness. Finally, the use and variability of individually distinctive calls (signature whistles) within and between Irish and US waters were also examined. Relatively high levels of whistle variation were found within a genetically and socially isolated population of dolphins in the Shannon Estuary, reflecting the need for individual identification and distinctive whistles in a population with long term site fidelity and high levels of social cohesion. Variation between reproductively separate communities in Irish waters was relatively small except between animals in inshore compared with continental shelf waters. The greatest differences in whistle structure overall were evident between dolphins using inshore and offshore US waters, likely reflecting social isolation of the two distinct ecotypes that occur in these waters but also variation in behaviour or habitat conditions. Variation found among inshore communities in US waters reflected similarities in habitat use and levels of social interaction. These findings suggest that vocal variation is socially mediated, behaviourally maintained and dependent on levels of social contact between individuals. The findings contribute to our understanding of the interaction of factors influencing vocalisation behaviour in this behaviourally complex and ecologically plastic species.

A qualitative study of trends in patient preferences for the management of partial dentition

Objective: To identify factors influencing attitudes of partially dentate adults towards dental treatment in Ireland. Background: People are retaining more teeth later in life than ever before. Management of partially dentate older adults will be a major requirement for the future and it is important to determine factors which may influence patients’ attitudes to care. Methods: Subjects: A purposive sample of 22 partially dentate patients was recruited; 12 women and 12 men, ranging in age from 45 to 75 years. Data Collection: Semi-structured individual interviews. Results: Dental patients have increasing expectations in relation to (i) a more sophisticated approach to the management of missing teeth and (ii) their right to actively participate in decision making regarding the management of their tooth loss. There is some evidence of a cohort effect with younger patients (45–64 years) having higher expectations. Conclusions: The evidence of a cohort effect within this study in relation to higher patient expectations indicates that both contemporary and future patients are likely to seek a service based on conservation and restoration of missing teeth by fixed prostheses.

Development of a triple stage heat transformer for the recycling of low temperature heat energy

Absorption heat transformers are thermodynamic systems which are capable of recycling industrial waste heat energy by increasing its temperature. Triple stage heat transformers (TAHTs) can increase the temperature of this waste heat by up to approximately 145˚C. The principle factors influencing the thermodynamic performance of a TAHT and general points of operating optima were identified using a multivariate statistical analysis, prior to using heat exchange network modelling techniques to dissect the design of the TAHT and systematically reassemble it in order to minimise internal exergy destruction within the unit. This enabled first and second law efficiency improvements of up to 18.8% and 31.5% respectively to be achieved compared to conventional TAHT designs. The economic feasibility of such a thermodynamically optimised cycle was investigated by applying it to an oil refinery in Ireland, demonstrating that in general the capital cost of a TAHT makes it difficult to achieve acceptable rates of return. Decreasing the TAHT's capital cost may be achieved by redesigning its individual pieces of equipment and reducing their size. The potential benefits of using a bubble column absorber were therefore investigated in this thesis. An experimental bubble column was constructed and used to track the collapse of steam bubbles being absorbed into a hotter lithium bromide salt solution. Extremely high mass transfer coefficients of approximately 0.0012m/s were observed, showing significant improvements over previously investigated absorbers. Two separate models were developed, namely a combined heat and mass transfer model describing the rate of collapse of the bubbles, and a stochastic model describing the hydrodynamic motion of the collapsing vapour bubbles taking into consideration random fluctuations observed in the experimental data. Both models showed good agreement with the collected data, and demonstrated that the difference between the solution's temperature and its boiling temperature is the primary factor influencing the absorber's performance.

Antimicrobial stewardship in Ireland, with a focus on long term care facilities

Background: Antimicrobial resistance is a major public health concern, and its increasing incidence in the Long Term Care Facility (LTCF) setting warrants attention (1). The prescribing of antimicrobials in this setting is often inappropriate and higher in Ireland than the European average (2). The aim of the study was to generate an evidence base for the factors influencing antimicrobial prescribing in LTCFs and to investigate Antimicrobial Stewardship (AMS) strategies for LTCFs. Methods: An initial qualitative study was conducted to determine the factors influencing antimicrobial prescribing in Irish LTCFs. This allowed for the informed implementation of an AMS feasibility study in LTCFs in the greater Cork region. Hospital AMS was also investigated by means of a national survey. A study of LTCF urine sample antimicrobial resistance rates was conducted in order to collate information for incorporation into future LTCF AMS initiatives. Results: The qualitative interviews determined that there are a multitude of factors, unique to the LTCF setting, which influence antimicrobial prescribing. There was a positive response from the doctors and nurses involved in the feasibility study as they welcomed the opportunity to engage with AMS and audit and feedback activities. While the results did not indicate a significant change in antimicrobial prescribing over the study period, important trends and patterns of use were detected. The antimicrobial susceptibility of LTCF urine samples compared to GPs samples found that there was a higher level of antimicrobial resistance in LTCFs. Conclusion: This study has made an important contribution to the development of AMS in LTCFs. The complexity of care and healthcare organisation, and the factors unique to LTCFs must be borne in mind when developing quality improvement strategies.